LDPE，Braskem PE LDF6522对比LDPE，Petrothene® NA204000 (Extrusion Coating)物性表,价格行情_搜料

牌号信息	Braskem PE LDF6522 物性表 LDPE & 巴西布拉斯科指导价格：暂无塑料库存：缺货	Petrothene® NA204000 (Extrusion Coating) 物性表 LDPE & 荷兰利安德巴塞尔指导价格：暂无塑料库存：缺货
牌号简介	LDF6522树脂是一种低密度聚乙烯，专为铸造挤出和注塑部门设计。它用于软包装和纸板涂层。它提供了低颈部和最佳挤出速度（下拉）。该树脂符合美国FDA 21 CFR 177.1520。用途：挤出涂料，瓶盖注射，母粒，零食包装，果汁和调味品。工艺：铸膜挤出。注射成型。 LDF6522 resin is a low density polyethylene designed for cast extrusion and injection molding sectors. It is used for flexible packaging and cardboard coating. It offers low neck in and optimum extrusion speed (Draw down). This resin meets U.S. FDA 21 CFR 177.1520. Applications: Extrusion Coating, Caps Injection, Masterbatch, Packaging for snacks, juices and condiments. Process: Cast Film Extrusion. Injection molding.	Petrothene NA204000是一种高速、轻量的涂料树脂，客户可选择用于纸张、薄膜和其他基础材料。这种树脂可以以1200英尺/分钟或更高的线速挤出。由涂有NA204000的材料制成的产品通常包括通用软包装和零食包装。NA204000具有优异的粘合性和热密封性，低颈缩。 Petrothene NA204000 is selected by customers for use in both extrusion coating and injection molding applications. NA204000 is a high speed, lightweight coating resin for use with paper, films and other base stocks. This resin can be extruded at line speeds of 1200 ft/min or higher. Products made from materials coated with NA204000 typically include general-purpose flexible packaging and snack food packaging. NA204000 yields excellent adhesion and heat sealing characteristics and low neck-in. When NA204000 is used in injection molding applications, it exhibits an excellent balance of toughness and softness, with excellent dimensional stability. Typical injection molding applications include housewares, toys, containers and novelty items.

产品描述
厂家：	巴西布拉斯科 Braskem	荷兰利安德巴塞尔 LyondellBasell
类别：	LDPE LDPE	LDPE LDPE
填料：
用途：	食品包装,护罩,流延薄膜,涂层应用,母料	层压板,包装,涂层应用,铝箔涂料,纸张涂料
性能特点：	内缩量低 Low shrinkage	热封性好,内缩量低,食品接触,粘结性好 Good heat sealing,Low shrinkage,Food contact compliance,Good bond
加工条件：	挤出涂层	挤出涂层

技术参数

物理性能
PHYSICAL Braskem PE LDF6522 Petrothene® NA204000 (Extrusion Coating) 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D1505

密度
Density g/cm³ ASTM D792

熔体质量流动速率(190℃，2.16kg)
Melt Flow Rate g/10min ASTM D1238

热性能
THERMAL Braskem PE LDF6522 Petrothene® NA204000 (Extrusion Coating) 单位
UNIT 测试方法
TEST METHOD

维卡软化温度
Vicat Softening Temp ℃ ASTM D1525

机械性能
MECHANICAL Braskem PE LDF6522 Petrothene® NA204000 (Extrusion Coating) 单位
UNIT 测试方法
TEST METHOD

弯曲模量
Bending modulus MPa ASTM D790

弯曲模量(1% 正割)
Bending modulus MPa ASTM D790

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa ASTM D638

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

加工方式

挤出 Braskem PE LDF6522 Petrothene® NA204000 (Extrusion Coating) 单位测试方法

熔体温度 °C

备注

1 一般属性：这些不能被视为规格。

2 类型 4


相关资讯

牌号简介
产品描述
技术参数
物理性能
热性能
机械性能
加工方式
挤出
备注
返回顶部

LDPE，Braskem PE LDF6522对比LDPE，Petrothene® NA204000 (Extrusion Coating)对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别