Epoxies, Ect. 20-3060
环氧树脂 & 美国Epoxies
Epoxies, Ect. 20-3300
环氧树脂 & 美国Epoxies
牌号信息 |
环氧树脂 & 美国Epoxies 指导价格:暂无 塑料库存: 缺货 |
环氧树脂 & 美国Epoxies 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
20-3060是一种通用的低粘度环氧灌封封装树脂体系。这是一个100%固体系统。因此不含任何溶剂。20-3060是一种填充系统,具有良好的尺寸稳定性和极低的收缩率。20-3060具有优异的抗冲击、振动和热冲击性能。此外,这种多功能树脂系统是可加工和理想的计量混合配料设备使用。由于其高纯度,20-3060提供了最终的物理,热和电气绝缘性能。固化后的聚合物对化学品、水分、溶剂和环境暴露具有优异的抵抗力。20-3060推荐用于要求所有性能最佳的应用,以及刚性或柔性导线直接从封装材料中突出的应用。当导线弯曲时,该系统可消除微观裂纹。它也能很好地附着在铅材料上,如乙烯基、氯丁橡胶、天然橡胶等。20-3060作为一种封装材料在变压器、线圈、扼流圈、螺线管、电阻器、模块、微电路、电阻器、电容器等应用中得到广泛的认可。20-3060的配方易于操作,其低粘度有助于浇注、填充空隙和气穴。此外,20-3060中的填料已分散,以尽量减少任何严重沉降。 20-3060 is a general purpose, low viscosity epoxy potting and encapsulating resin system. This is a 100% solids system. It therefore does not contain any solvents. 20-3060 is a filled system resulting in excellent dimensional stability and extremely low shrinkage. 20-3060 is characterized by exceptional resistance to impact, vibration, and hermal shock. In addition, this versatile resin system is machinable and ideal for use with meter mix dispensing equipment. Due to its high purity, 20-3060 offers the ultimate in physical, thermal and electrical insulation properties. The cured polymer exhibits excellent resistance to chemicals, moisture, solvents and environmental exposure. 20-3060 is recommended for applications requiring the optimum in over-all properties and where rigid or flexible wire leads protrude directly from the encapsulant. This system eliminates microscopic cracking when leads are flexed. It also adheres extremely well to lead materials, such as vinyl, neoprene, natural rubber, etc... 20-3060 has found wide acceptance as an encapsulant for applications such as transformers, coils, chokes, solenoids, resistors, modules, microcircuitry, resistors, capacitors, etc... 20-3060 has been formulated for ease in handling and its low viscosity aids in pouring, filling voids and air pockets. In addition, the fillers in 20-3060 have been dispersed to minimize any heavy settling. |
20-3300是一个由两部分组成的环氧树脂系统,旨在满足最关键的电子封装要求。该体系具有低收缩、高拉伸、高压缩强度等特点。20-3300是高温和热冲击暴露的理想选择。它具有良好的粘附力,大多数基板和形成一个密封样的密封,以保护封装的部分。高压应用的最佳选择。20-3300具有方便的1:1混合比和延长的使用寿命。 20-3300 is a two part epoxy system formulated to meet the most critical electronic encapsulating requirements. This system has low shrinkage, high tensile and compressive strength. 20-3300 is ideal for high heat and thermal shock exposure. It has excellent adhesion to most substrates and forms a hermetic like seal to protect encapsulated parts. Great choice for high voltage applications. 20-3300 has a convenient 1:1 mix ratio with an extended pot life. |
|
产品描述 | |||
厂家: | 美国Epoxies | 美国Epoxies | |
类别: | 环氧树脂 环氧树脂 | 环氧树脂 环氧树脂 | |
填料: | |||
用途: | 通用,粘合剂 | 高温应用,电气/电子应用领域,密封件,粘合剂 | |
性能特点: | 韧性好,冲击性能好,尺寸稳定性好,吸水率低,低粘度,减震,收缩性低,可分散,粘结性好,耐化学性,绝缘 Good flexibility,High impact resistance,Good Dimensional Stability,Low or no water absorption,Low Viscosity,noise reduction,Low contractility,Machinable,Good bond,Solvent resistance,Insulation | 收缩性低,粘结性好,拉伸性能好,抗压性能好 Low contractility,Good bond,Good Tensile Strength,Good compressive strength | |
加工条件: | 灌封 | 包封 |
备注 |
1 一般属性:这些不能被视为规格。
2 Resin
|
1 一般属性:这些不能被视为规格。
2 100 gram mass
|
价格走势对比图
环氧树脂 Epoxies, Ect. 20-3060
环氧树脂 Epoxies, Ect. 20-3300
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交