PA6T，ARLEN™ AE2230对比PA6T，ARLEN™ C230N物性表,价格行情_搜料

牌号信息	ARLEN™ AE2230 物性表 PA6T & 日本三井指导价格：暂无塑料库存：缺货	ARLEN™ C230N 物性表 PA6T & 日本三井指导价格：暂无塑料库存：缺货
牌号简介	ARLEN™ AE2230是一种聚酰胺 6T（尼龙 6T）材料,含有的填充物为30% 玻璃纤维增强材料。该产品在北美洲有供货,。 ARLEN™ AE2230的主要特性为:阻燃/额定火焰。 ARLEN™ AE2230 (Dry) ARLEN™ AE2230 is a Polyamide 6T (Nylon 6T) material filled with 30% glass fiber. It is available in North America. Primary attribute of ARLEN™ AE2230: Flame Rated. ARLEN™ AE2230 ARLEN™ AE2230 by Mitsui Chemicals is a modified polyamide 6T reinforced with 30% glass fiber. Possesses high dimensional stability, high melting point, minimum water absorption and high glass transition point (125°C). Exhibits good chemical and heat resistance. Offers high rigidity even in a high-temperature atmosphere such as the inside of an engine room. Is suitable for processing by injection molding. ARLEN™ AE2230 is used in mechanical and structural applications including under the hood parts such as cooling system parts, cylinder head covers, thermostat cases, hydraulic system pistons and oil pump housings. Recommended for light-load tribological application parts of office automation equipment. Complies with UL 94 HB flame rating. Features: Possesses high dimensional stability, high melting point, minimum water absorption and high glass transition point (125°C). Exhibits good chemical and heat resistance with high rigidity. Applications: ARLEN™ AE2230 is used in mechanical and structural applications including under the hood parts such as cooling system parts, cylinder head covers, thermostat cases, hydraulic system pistons and oil pump housings. Recommended for light-load tribological application parts of office automation equipment.	ARLEN™ C230N是一种聚酰胺 6T（尼龙 6T）材料,含有的填充物为30% 玻璃纤维增强材料。该产品在北美洲有供货,。 ARLEN™ C230N的主要特性有: 阻燃/额定火焰 Flame Retardant ARLEN™ C230N的典型应用领域为:电气/电子应用 ARLEN™ C230N is a Polyamide 6T (Nylon 6T) material filled with 30% glass fiber. It is available in North America. Important attributes of ARLEN™ C230N are: Flame Rated Flame Retardant Typical application of ARLEN™ C230N: Electrical/Electronic Applications

产品描述
厂家：	日本三井 Mitsui	日本三井 Mitsui
类别：	PA6T PA 6T	PA6T PA 6T
填料：	玻璃纤维 30	玻璃纤维 30
用途：		电气/电子应用领域
性能特点：	防火阻燃等级HB HB	阻燃,防火阻燃等级V-0 Flame Characteristics,V-0
加工条件：

技术参数

物理性能
PHYSICAL ARLEN™ AE2230 ARLEN™ C230N 单位
UNIT 测试方法
TEST METHOD

吸水率(100℃，24hr)
Water absorption rate % ASTM D570

吸水率(23℃，24hr)
Water absorption rate % ASTM D570

密度
Density g/cm³ ASTM D792

收缩率(MD：2.0 mm)
Shrinkage rate % ASTM D955

收缩率(TD：2.0 mm)
Shrinkage rate % ASTM D955

冲击性能
IMPACT ARLEN™ AE2230 ARLEN™ C230N 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度
Impact strength of cantilever beam notch J/m ASTM D256

热性能
THERMAL ARLEN™ AE2230 ARLEN™ C230N 单位
UNIT 测试方法
TEST METHOD

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

熔融温度
Melting temperature ℃

玻璃化转变温度
Glass transition temperature ℃ DSC

线性热膨胀系数(MD)
Linear coefficient of thermal expansion 1/℃ ASTM D696

线性热膨胀系数(TD)
Linear coefficient of thermal expansion 1/℃ ASTM D696

电气性能
ELECTRICAL ARLEN™ AE2230 ARLEN™ C230N 单位
UNIT 测试方法
TEST METHOD

介电常数(1 MHz)
Dielectric constant ASTM D150

介电强度
Dielectric strength kV/mm ASTM D149

体积电阻率
Volume resistivity ohms·cm ASTM D257

耗散因数(1 MHz)
Dissipation factor ASTM D150

阻燃性能
FLAMMABILITY ARLEN™ AE2230 ARLEN™ C230N 单位
UNIT 测试方法
TEST METHOD

阻燃等级
Flame retardant level UL 94

机械性能
MECHANICAL ARLEN™ AE2230 ARLEN™ C230N 单位
UNIT 测试方法
TEST METHOD

弯曲强度
bending strength MPa ASTM D790

弯曲模量
Bending modulus MPa ASTM D790

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度
tensile strength MPa ASTM D638

洛氏硬度(M 级)
Rockwell hardness ASTM D785

加工方式

注射 ARLEN™ AE2230 ARLEN™ C230N 单位测试方法

射嘴温度 °C

干燥时间 hr

干燥温度 °C

料斗温度 °C

料筒中部温度 °C

料筒前部温度 °C

料筒后部温度 °C

模具温度 °C

注射速度

螺杆转速 rpm

备注

1 一般属性：这些不能被视为规格。


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
电气性能
阻燃性能
机械性能
加工方式
注射
备注
返回顶部

PA6T，ARLEN™ AE2230对比PA6T，ARLEN™ C230N对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别