硅酮，NuSil MED-400对比硅酮，NuSil CF20-2186物性表,价格行情_搜料

牌号信息	NuSil MED-400 物性表硅酮 & 美国诺希尔指导价格：暂无塑料库存：缺货	NuSil CF20-2186 物性表硅酮 & 美国诺希尔指导价格：暂无塑料库存：缺货
牌号简介	Nusil技术的限制性材料可考虑用于短期植入应用，29天或更短时间，或用于外部应用。流体是非固化、稳定的硅聚合物，通常用作润滑剂。液体有多种粘度。根据粘度的不同，可以通过喷涂、浸渍、擦拭或刷洗来涂抹液体。为了获得最佳性能，流体的化学性质不应与被润滑的基底的化学性质相匹配。如果不确定基底和润滑剂的相容性，请联系每种材料的供应商寻求帮助。因为它们是动态的，所以流体可以适应在许多项目中表现良好。评论：氟硅聚合物 NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chemistry of the fluid should not match the chemistry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance. Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects. Comments: FLUOROSILICONE POLYMER	作为电子包装的一种低应力替代品，Nusil Technology的硅树脂允许设计师从一系列独特的硅树脂中选择不同级别的包装。我们有广泛的封装材料、粘合剂和润滑脂可供选择。这些包括用于热界面材料（TIM）或EMI和RFI屏蔽应用的热传导和导电硅酮。电子用硅酮的好处：宽工作温度范围为-115°C至250°C，低吸水率，<0.4%典型耐腐蚀性，高介电强度>500 V/mil（0.001英寸）或20 kV/mm填料，可提供低模量（通常小于5.5 MPa/800 psi）的热传导性能稳定。e暴露于高温下时的化学和机械性能，如凝胶、弹性体、薄膜粘合剂、片材和润滑脂。一般用途：粘合剂和密封剂评论：更长的工作时间。 As a low stress alternative for electronic packaging, NuSil Technology's silicones allow the designer to choose from a unique line of silicones for various levels of packaging. We have an extensive line of encapsulants, adhesives, and greases to choose from. These include thermally and electrically conductive silicones for Thermal Interface Materials (TIM) or for EMI and RFI shielding applications. Benefits of Silicone for Electronics: Wide Operating Temperature Range of -115 °C to 250 °C Low moisture absorption, < 0.4% Typical Corrosion Resistance High Dielectric Strength > 500 V/mil (0.001 inch) or 20 kV/mm Fillers can be added to provide thermal and electrical conductive properties Low Modulus (Typically less than 5.5 MPa/800 psi) Stable chemical and mechanical properties when exposed to high temperatures Low Shrinkage Available as gels, elastomers, film adhesives sheeting, and greases General Purpose: Adhesives and Sealants Comments: Longer Work Time

产品描述
厂家：	美国诺希尔 NuSil	美国诺希尔 NuSil
类别：	硅酮硅酮	硅酮硅酮
填料：
用途：	医疗/护理用品	密封剂,粘合剂,电气/电子应用领域
性能特点：	疏水性 Hydrophobic	收缩性低,耐腐蚀,低吸湿性,热稳定性好 Low contractility,Corrosion Resistant,Low moisture absorption,Heat Stabilized
加工条件：	可喷涂