3D打印材料，Dyna-Purge® E2对比3D打印材料，Accura® Bluestone™物性表,价格行情_搜料

牌号信息	Dyna-Purge® E2 物性表 3D打印材料 & 美国Dyna-Purge 指导价格：暂无塑料库存：缺货	Accura® Bluestone™ 物性表 3D打印材料 & 美国3D Systems 指导价格：暂无塑料库存：缺货
牌号简介	专为高温工程树脂设计Dyna-Purge® E2在热稳定性和增强清洁方面提供了最先进的技术突破。其独特的集成聚合物系统用于安全高效地清洗机器所有区域的高温树脂，包括密封通道。特点和优点：非常适合于清洗高温工程树脂，如PEEK、PEI、PPS、PPA、PSU等。特别适用于变色、树脂更换、预防性机器维护，以及在手动清洗之前，可在-575°F至715°F（302°C至379°C）的高温范围内进行有效的清洗。气味低，烟气少，无磨损，无化学成分。Cal集成聚合物系统彻底清洁和置换先前生产的树脂和颜色安全且无危险-成分符合FDA标准，热稳定-建议在关闭和启动期间降低“每次清洗成本”-只需少量有效且易于使用-无需混合，无需无限的保质期。 Designed for High-Temperature Engineering Resins Dyna-Purge E2 delivers the most advanced technology breakthrough in heat stability and enhanced cleaning. Its unique integrated polymer system was developed for purging high-temperature resins safely and efficiently in all areas of the machine, including tight channels. FEATURES & BENEFITS: Ideal for purging high-temperature engineering resins such as PEEK, PEI, PPS, PPA, PSU, etc. Excellent for color changes, resin changes, preventative machine maintenance, and prior to manual cleaning Effective through a high temperature range- 575°F to 715°F (302°C to 379°C) Low odor with less fumes Non-abrasive, non-chemical integrated polymer system thoroughly cleans and displaces the previous production resin and color Safe and non-hazardous- ingredients are FDA compliant Heat stable - recommended during shutdown and start-up Low "cost-per-purge" - only small quantity needed to be effective Easy to use - no mixing required Unlimited shelf life	具有最高的刚度、耐热性和耐磨性、优异的耐化学性，适用于风洞模型、夹具和固定装置。 Features Highest stiffness available Heat and abrasion resistant Excellent chemical resistance Great for windtunnel models, jigs and fixtures

产品描述
厂家：	美国Dyna-Purge	美国3D Systems
类别：	3D打印材料 3D打印材料	3D打印材料 3D打印材料
填料：
用途：	清洗复合物
性能特点：	低VOC Low odor	机械强度好,耐高温,耐磨,耐化学性 Good Rigidity,High Heat Resistance,Good wear resistance,Solvent resistance
加工条件：	化合物挤出	立体光刻