氟橡胶，Cri-Line FKX-719-75对比氟橡胶，Boda BDF601P物性表,价格行情_搜料

牌号信息	Cri-Line FKX-719-75 物性表氟橡胶 & 美国Cri-Tech 指导价格：暂无塑料库存：缺货	Boda BDF601P 物性表氟橡胶 & 成都晨光博达指导价格：暂无塑料库存：缺货
牌号简介	LS化合物的设计使零件收缩（出模）和后固化操作与丁腈或类似弹性体相当。在大多数情况下，切换到LS化合物时不需要更改工具。NPC表示，无需进行后固化，即可获得具有良好压缩永久变形和老化特性的高拉伸值和模量值。FKHT是一种耐高温、低压缩永久变形的化合物。FKX是一种高粘度、高绿色强度、黑色碳氟化合物，适用于O型圈帘线和挤压型材的HAV和/或盐浴固化。 The LS compounds are designed to give part shrinkage (out of the mold) and post-curing operation comparable to a nitrile or similar elastomer. In most cases, tooling changes are not required when switching over to an LS compound. NPC indicates no post cure required to achieve high tensile and modulus values with good compression set and aging characteristics. FKHT is a high temperature resistant, low compression set compound. FKX is a high viscosity, high green strength, black fluorocarbon compound formulated for HAV and / or salt bath curing of O-ring cord and extruded profiles.	BDF601P是中高粘度固化型含氟弹性体共聚物。该等级非常适合需要良好的机械性能和良好的压缩永久性的应用。BDF601P可以复合以满足主要的氟橡胶规格。BDF601P可用于O型圈和垫圈的压塑。它可以使用典型的氟弹性体配合剂进行混合。混合可以通过两个辊磨机或内部搅拌机完成。制成品可采用多种橡胶加工方法生产。 BDF601P is a medium to high viscosity curative incorporated fluoroelastomer copolymer. This grade is well suited for application where good mechanical properties and excellent compression set resistance are required. BDF601P can be compounded to meet the major fluoroelastomer specifications. BDF601P can be used for compression molding of O-rings and gaskets. It can be mixed using typical fluoroelastomer compounding ingredients. Mixing can be accomplished with two-roll mills or internal mixers. Finished goods can be produced by a variety of rubber processing methods.

产品描述
厂家：	美国Cri-Tech	成都晨光博达 Fluoro
类别：	氟橡胶氟橡胶	氟橡胶氟橡胶
填料：
用途：		复合,垫圈
性能特点：	高粘度 High Viscosity	尺寸稳定性好,共聚物 Good Dimensional Stability,Copolymer
加工条件：		压缩模塑