3D打印材料，Dyna-Purge® K对比3D打印材料，Accura® Bluestone™物性表,价格行情_搜料

牌号信息	Dyna-Purge® K 物性表 3D打印材料 & 美国Dyna-Purge 指导价格：暂无塑料库存：缺货	Accura® Bluestone™ 物性表 3D打印材料 & 美国3D Systems 指导价格：暂无塑料库存：缺货
牌号简介	“双动力”清洗适用于各种低温树脂Dyna-purge K，是一种低温、非研磨、非化学工程热塑性清洗化合物，配制成自然流过机器。两种独特的成分提供“双动力”清洁体验。一种非熔化但软化的热塑性擦洗，同时专用添加剂膨胀，去除任何污染物而不留下残渣。特点和优点：针对颜色变化、树脂变化、预防性机器维护和手动清洗前进行开发，特别适用于在温度范围较宽的情况下（290°F至550°F（143°C至287°C），最小间隙为0.025英寸（0.65 mm）或更大的设备清洗，使用方便-无工艺调整N必要-在常驻树脂加工温度和转速下使用非磨蚀、非熔化但软化的热塑性塑料，彻底松动碳化和降解的树脂，使其能够安全、无害地从系统中冲洗出来，不含化学品-成分符合FDA热稳定性-建议在停堆和停止期间使用。RT-up低“每次清洗成本”-只需少量即可有效，无需混合-简单使用“原样”即“无限保质期” "Dual Power" cleaning for a broad range of low-temp resins DYNA-PURGE K is a low-temperature, non-abrasive, non-chemical engineered thermoplastic purging compound, formulated to flow naturally through the machine. Two unique ingredients provide for a "dual power" cleaning experience. A non-melting but softening thermoplastic scrubs while a proprietary additive expands, removing any contamination without leaving behind a residue. FEATURES & BENEFITS: Developed for color changes, resin changes, preventative machine maintenance, and before manual cleaning Excellent for purging through equipment with a minimum clearance of 0.025 inch (0.65 mm) or greater Effective through a wide range of temperatures - 290°F to 550° F (143°C to 287°C) Easy to use - no process adjustment necessary - use at the resident resin processing temperature and RPM speed Non-abrasive, non-melting but softening thermoplastic, which thoroughly loosens carbonized and degraded resin, allowing it to be flushed out of the system Safe, non-hazardous, with no chemicals - ingredients are FDA compliant Heat stable - recommended during shutdown and start-up Low "cost-per-purge" - only a small quantity is needed to be effective No mixing required - simply use "as is" Unlimited shelf life	具有最高的刚度、耐热性和耐磨性、优异的耐化学性，适用于风洞模型、夹具和固定装置。 Features Highest stiffness available Heat and abrasion resistant Excellent chemical resistance Great for windtunnel models, jigs and fixtures

产品描述
厂家：	美国Dyna-Purge	美国3D Systems
类别：	3D打印材料 3D打印材料	3D打印材料 3D打印材料
填料：
用途：	清洗复合物
性能特点：		机械强度好,耐高温,耐磨,耐化学性 Good Rigidity,High Heat Resistance,Good wear resistance,Solvent resistance
加工条件：	挤出 Extrusion	立体光刻