PEEK，VESTAKEEP® 2000 FC30对比PEEK，VESTAKEEP® 4000 FC30物性表,价格行情_搜料

牌号信息	VESTAKEEP® 2000 FC30 物性表 PEEK & 德国赢创指导价格：暂无塑料库存：缺货	VESTAKEEP® 4000 FC30 物性表 PEEK & 德国赢创指导价格：暂无塑料库存：缺货
牌号简介	碳纤维增强，石墨和聚四氟乙烯填充聚醚酮VESTAKEEP® 2000 FC30是一种中等粘度，碳纤维增强，石墨和聚四氟乙烯填充聚醚酮用于注塑成型。该树脂制成的零件由于具有自润滑作用，可用于轴承衬套或齿轮箱零件。半结晶聚合物具有优异的机械、热和化学抗性。VESTAKEEP® 2000 FC30制造的零件是自动灭火的。VESTAKEEP® 2000 FC30可由热塑性塑料常用的注塑机加工。我们建议在注塑过程中，熔融温度在370°C到380°C之间。如果温度超过380°C，会释放有毒气体。必须提供足够的通风和保护设备。模具温度应在160°C至200°C的范围内，最好是180°C。 Carbon fiber-reinforced, graphite and PTFE-filled polyether ether ketone VESTAKEEP 2000 FC30 is a medium-viscosity, carbon fiber-reinforced, graphite and PTFEfilled polyether ether ketone for injection molding. Parts made of this resin can be used for bearing bushing or gearbox parts, due to the self-lubricating effect. The semi-crystalline polymer features superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP 2000 FC30 are self-extinguishing. VESTAKEEP 2000 FC30 can be processed by common injection-molding machines for thermoplastics. We recommend a melt temperature between 370°C and 380°C during the injection molding process. If temperatures exceed 380°C, toxic gases can be released. Adequate ventilation and protective equipment must be provided. The mold temperature should be within a range of 160°C to 200°C, preferably 180°C.	碳纤维增强，石墨和聚四氟乙烯填充聚醚酮VESTAKEEP® 4000 FC30是一种碳纤维增强，石墨和聚四氟乙烯填充聚醚酮用于注塑成型。该树脂制成的零件由于具有自润滑作用，可用于轴承衬套或齿轮箱零件。半结晶聚合物具有优异的机械、热和化学抗性。VESTAKEEP® 4000 FC30制造的零件是自动灭火的。VESTAKEEP® 4000 FC30可由热塑性塑料常用的注塑机加工。我们建议在注塑过程中，熔融温度在370°C到380°C之间。如果温度超过380°C，会释放有毒气体。必须提供足够的通风和保护设备。模具温度应在160°C至200°C的范围内，最好是180°C。 Carbon fiber-reinforced, graphite and PTFE-filled polyether ether ketone VESTAKEEP 4000 FC30 is a carbon fiberreinforced, graphite and PTFE-filled polyether ether ketone for injection molding. Parts made of this resin can be used for bearing bushing or gearbox parts due to the self-lubricating effect. The semi-crystalline polymer features superior mechanical, thermal, and chemical resistance. Parts made from VESTAKEEP 4000 FC30 are self-extinguishing. VESTAKEEP 4000 FC30 can be processed by common injection molding machines for thermoplastics. We recommend a melt temperature between 370°C and 380°C during the injection molding process. If temperatures exceed 380°C, toxic gases can be released. Adequate ventilation and protective equipment must be provided. The mold temperature should be within a range of 160°C to 200°C, preferably 180°C.

产品描述
厂家：	德国赢创 Evonik	德国赢创 Evonik
类别：	PEEK PEEK	PEEK PEEK
填料：	PTFE/碳纤维/石墨	PTFE/碳纤维/石墨
用途：	齿轮,衬套,轴承	轴承,齿轮,衬套
性能特点：	自润滑,自熄,半结晶,耐化学性,防火阻燃等级V-0 Self-lubricating,Self-extinguishing,Hypocrystalline,Solvent resistance,V-0	自润滑,自熄,半结晶,耐化学性,防火阻燃等级V-0 Self-lubricating,Self-extinguishing,Hypocrystalline,Solvent resistance,V-0
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL VESTAKEEP® 2000 FC30 VESTAKEEP® 4000 FC30 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ISO 1183

收缩率(MD：180℃，2.0 mm)
Shrinkage rate % ISO 294-4

收缩率(TD：180℃，2.0 mm)
Shrinkage rate % ISO 294-4

熔体体积流动速率(380℃，5 kg)
Melt Volume Rate cm³/10min ISO 1133

机械性能
MECHANICAL VESTAKEEP® 2000 FC30 VESTAKEEP® 4000 FC30 单位
UNIT 测试方法
TEST METHOD

拉伸应变(断裂)
Tensile strain % ISO 527-2

拉伸应变(断裂)
Tensile strain % ISO 527-2/5

拉伸强度(断裂)
tensile strength MPa ISO 527-2

拉伸强度(断裂)
tensile strength MPa ISO 527-2/5

拉伸模量
Tensile modulus MPa ISO 527-2

冲击性能
IMPACT VESTAKEEP® 2000 FC30 VESTAKEEP® 4000 FC30 单位
UNIT 测试方法
TEST METHOD

简支梁无缺口冲击强度(-30℃，完全断裂)
Charpy Unnotch Impact strength kJ/m² ISO 179/1eU

简支梁无缺口冲击强度(23℃，完全断裂)
Charpy Unnotch Impact strength kJ/m² ISO 179/1eU

简支梁缺口冲击强度(-30℃，完全断裂)
Charpy Notched Impact Strength kJ/m² ISO 179/1eA

简支梁缺口冲击强度(23℃，完全断裂)
Charpy Notched Impact Strength kJ/m² ISO 179/1eA

热性能
THERMAL VESTAKEEP® 2000 FC30 VESTAKEEP® 4000 FC30 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/B

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/A

熔融温度
Melting temperature ℃ ISO 11357-3

熔融温度(DSC)
Melting temperature ℃ ISO 3146

线性热膨胀系数(MD：23~55℃)
Linear coefficient of thermal expansion 1/℃ ISO 11359-2

维卡软化温度(--)
Vicat Softening Temp ℃ ISO 306/A

维卡软化温度(--)
Vicat Softening Temp ℃ ISO 306/B

电气性能
ELECTRICAL VESTAKEEP® 2000 FC30 VESTAKEEP® 4000 FC30 单位
UNIT 测试方法
TEST METHOD

体积电阻率
Volume resistivity ohms·cm IEC 60093

相对电容率(1 MHz)
Relative permittivity IEC 60250

相对电容率(50 Hz)
Relative permittivity IEC 60250

表面电阻率
Surface resistivity ohms IEC 60093

阻燃性能
FLAMMABILITY VESTAKEEP® 2000 FC30 VESTAKEEP® 4000 FC30 单位
UNIT 测试方法
TEST METHOD

1.60 mm
1.60 mm UL 94

灼热丝可燃性指数(2.0 mm)
Glowing wire flammability index ℃ IEC 60695-2-12

灼热丝起燃温度(2 mm)
Igniting temperature of the hot wire ℃ IEC 60695-2-13

加工方式

注射 VESTAKEEP® 2000 FC30 VESTAKEEP® 4000 FC30 单位测试方法

加工熔体温度 °C

模具温度 °C

备注

1 一般属性：这些不能被视为规格。

2 determined on 2 mm sheets with film gate at rim mold temperature 180°C

3 2nd heating

1 一般属性：这些不能被视为规格。

2 determined on 2 mm sheets with film gate at rim mold temperature 180°C

3 2nd heating


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
冲击性能
热性能
电气性能
阻燃性能
加工方式
注射
备注
返回顶部

PEEK，VESTAKEEP® 2000 FC30对比PEEK，VESTAKEEP® 4000 FC30对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别