PA6，CompaMid® PA 6 GF 25对比PA6，TechnoMid PA6 S GF 25物性表,价格行情_搜料

牌号信息	CompaMid® PA 6 GF 25 物性表 PA6 & 德国DimeLika 指导价格：暂无塑料库存：缺货	TechnoMid PA6 S GF 25 物性表 PA6 & 德国Techno Compound 指导价格：暂无塑料库存：缺货
牌号简介	我们的新的可交联复合物PA 6是热塑性聚合物，由于β辐射交联，在较宽的温度范围内表现出弹性体的特性。由于交联，最初的热塑性材料能够承受高达350°C的高温，从而在热负荷下提供更大的形状保持力。由于其优异的性能特点，交联复合材料PA 6在许多情况下可以取代昂贵的高性能塑料，如PPA、PPS或LCP。从标准PA 6切换到复合PA 6时，无需更换模具，工艺参数也保持不变。电气应用由于其优异的电气和机械性能，交联复合PA6化合物非常适合在电气和电子工业中应用。汽车应用由康帕米PA 6制成的交联部件用于发动机舱和排气系统，在这些系统中，耐热性和形状保持性以及耐盐、化学品和腐蚀性介质的要求最为苛刻。 Our new crosslinkable CompaMid® PA 6 compounds are thermoplastic polymers which behave like elastomers over a wide temperature range as a result of beta radiation cross-linking. Thanks to crosslinking, the originally thermoplastic material can withstand significantly higher temperatures of up to 350 °C, thus providing greater shape retention under thermal load. Due to its excellent performance profile, crosslinkable CompaMid® PA 6 can replace costly high-performance plastics such as PPA, PPS or LCP in many cases. No mould changes are required when switching from standard PA 6 to CompaMid® PA 6, and the process parameters also remain the same. Electrical Applications Thanks to their outstanding electrical and mechanical properties, crosslinkable CompaMid® PA 6 compounds are ideally suited for applications in the electrical and electronics industries. Automotive Applications Crosslinked components made of CompaMid® PA 6 are used in the engine bay and exhaust system, where requirements are the toughest for heat resistance and shape retention, as well as resistance to salts, chemicals and corrosive media.	高机械强度和刚度、高热稳定性、低温下的高韧性、优异的滑动摩擦性能、适用于具有挑战性的应用的最佳流动特性、适用于低翘曲注塑成型零件以及“可交叉连接”的可用典型应用汽车：散热器格栅、外门把手、门门槛、车门后视镜壳、轮罩、方向盘、紧固卡子、换档杆壳、换档连杆、前照灯壳、电源和保险丝盒、前端模块、保险杠加强件、进气模块、发动机盖“美容盖”、阀盖和气缸盖盖盖、链条导板、齿形皮带盖、通风和冷却系统…家庭：椅子框架，家具脚轮，手工收费井…卫生：把手、配件、固定装置和风机管道：墙插筋、紧固件、电缆和管道夹具 High mechanical strength and stiffness High thermal stability High toughness at low temperatures Excellent sliding friction behavior Optimal flow characteristics for challenging applications Suitable for low-warpage injection molding parts Also "cross-linkable" available Typical Applications Automotive: Radiator grills, exterior door handles, door sills, door-mirror housings, wheel covers, steering wheels, fastening clips, gearshift-lever housings, shift links, headlamp housings, power and fuse boxes, front-End-Modules, bumper stiffener, air intake modules, engine covers "Beauty-Cover", valve bonnet and cylinder head covers, chain guides, toothed belt covers, ventilation and cooling systems... Household: Chair frames, furniture casters, craft toll shafts... Sanitation: Handles, fittings, fixtures and fans Plumbing: Wall dowels , fasteners, clamps for cables and pipes

产品描述
厂家：	德国DimeLika	德国Techno Compound
类别：	PA6 PA6	PA6 PA6
填料：	玻璃纤维 25	玻璃纤维 25
用途：		外壳,管道部件,紧固件,把手,汽车领域的应用,家用货品,配件,卫浴产品
性能特点：	电气性好,可交联,防火阻燃等级HB Good Electrical Properties,Crosslinked,HB	机械强度好,低翘曲性,易流动,耐低温韧性,热稳定性好,防火阻燃等级HB Good Rigidity,Low warping,Good liquidity,Low temperature toughness,Heat Stabilized,HB
加工条件：		注射成型 Injection Molding

技术参数

物理性能
PHYSICAL CompaMid® PA 6 GF 25 TechnoMid PA6 S GF 25 单位
UNIT 测试方法
TEST METHOD

吸水率(平衡，23℃，50% RH)
Water absorption rate % ISO 62

吸水率(饱和，23℃)
Water absorption rate % ISO 62

密度
Density g/cm³ ISO 1183

收缩率(MD)
Shrinkage rate % ISO 294-4

收缩率(MD：80℃)
Shrinkage rate % ISO 294-4

收缩率(TD)
Shrinkage rate % ISO 294-4

收缩率(TD：80℃)
Shrinkage rate % ISO 294-4

粘数
Viscosity number cm³/g ISO 307

机械性能
MECHANICAL CompaMid® PA 6 GF 25 TechnoMid PA6 S GF 25 单位
UNIT 测试方法
TEST METHOD

弯曲强度
bending strength MPa ISO 178

弯曲模量
Bending modulus MPa ISO 178

拉伸应变(屈服)
Tensile strain % ISO 527-2/50

拉伸应变(断裂)
Tensile strain % ISO 527-2/5

拉伸应变(断裂)
Tensile strain % ISO 527-2/50

拉伸强度(屈服)
tensile strength MPa ISO 527-2/50

拉伸强度(断裂)
tensile strength MPa ISO 527-2/5

拉伸强度(断裂)
tensile strength MPa ISO 527-2/50

拉伸模量
Tensile modulus MPa ISO 527-1-2

球压硬度
Ball hardness MPa ISO 2039-1

冲击性能
IMPACT CompaMid® PA 6 GF 25 TechnoMid PA6 S GF 25 单位
UNIT 测试方法
TEST METHOD

简支梁无缺口冲击强度(-30℃)
Charpy Unnotch Impact strength kJ/m² ISO 179/1eU

简支梁无缺口冲击强度(23℃)
Charpy Unnotch Impact strength kJ/m² ISO 179/1eU

简支梁缺口冲击强度(-30℃)
Charpy Notched Impact Strength kJ/m² ISO 179/1eA

简支梁缺口冲击强度(23℃)
Charpy Notched Impact Strength kJ/m² ISO 179/1eA

热性能
THERMAL CompaMid® PA 6 GF 25 TechnoMid PA6 S GF 25 单位
UNIT 测试方法
TEST METHOD

热变形温度
Hot deformation temperature ℃

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/A

热变形温度(8.0 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/C

熔融温度
Melting temperature ℃ ISO 11357-3

线性热膨胀系数(MD：23~80℃)
Linear coefficient of thermal expansion 1/℃ ISO 11359-2

线性热膨胀系数(TD：23~80℃)
Linear coefficient of thermal expansion 1/℃ ISO 11359-2

电气性能
ELECTRICAL CompaMid® PA 6 GF 25 TechnoMid PA6 S GF 25 单位
UNIT 测试方法
TEST METHOD

介电强度(1 mm)
Dielectric strength kV/mm IEC 60243-1

体积电阻率
Volume resistivity ohms·cm IEC 60093

相对电容率(1 MHz)
Relative permittivity IEC 60250

相比漏电起痕指数(解决方案 A)
Compared to the leakage tracing index V IEC 60112

表面电阻率
Surface resistivity ohms IEC 60093

阻燃性能
FLAMMABILITY CompaMid® PA 6 GF 25 TechnoMid PA6 S GF 25 单位
UNIT 测试方法
TEST METHOD

0.80 mm
0.80 mm UL 94

备注

1 一般属性：这些不能被视为规格。

2 260 °CWZ, 600 Bar

1 一般属性：这些不能被视为规格。

2 260°C / WZ 80°C, 600 bar

3 0.079 in/min

4 358 N

5 10°C/min


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
冲击性能
热性能
电气性能
阻燃性能
加工方式
备注
返回顶部

PA6，CompaMid® PA 6 GF 25对比PA6，TechnoMid PA6 S GF 25对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别