Clear Cote™ TECHNO-COTE™
环氧树脂 & 美国Club Kit
Ebalta AH 120 / GL
环氧树脂 & 德国Ebalta
牌号信息 |
环氧树脂 & 美国Club Kit 指导价格:暂无 塑料库存: 缺货 |
环氧树脂 & 德国Ebalta 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
Techno-Cote by Clear Cote是一个3速(2到1,按体积/重量计算)高质量的层压系统。它是100%环氧固体。适用于玻璃纤维、芳纶、碳纤维等复合材料的快速浸润。根据所需的固化速度和使用寿命,该系统可与3种不同活化剂中的任何一种一起购买。该材料具有易于使用的2:1混合比(2份树脂与1份活化剂,按体积/重量计),在室温下固化,几乎不脸红,形成坚硬、抗冲击的塑料,具有优异的耐水性、耐化学品性和耐溶剂性。这种材料适用于机械容积泵,一定要充分混合这些材料,并确保刮掉侧面和底部。与所有粘合剂类型的化合物一样,适当的表面处理对于良好的粘合强度至关重要,此外,应在材料彻底固化之前完成该材料的重新涂层,一般不超过24小时。如果材料已硬化且无粘性,则在重新涂层之前需要进行砂光和溶剂清洗。 TECHNO-COTE™ by CLEAR COTE™ is a 3 Speed (2 to 1, by volume/weight ) high quality, laminating system. It is 100% Epoxy solids. It is designed for the rapid wet out of fiberglass, Kevlar, carbon fiber and other composite materials. This system can be purchased with any one of 3 different Activators depending up on the desired cure speed and pot life. The material has an easy to use 2 to 1 mix ratio (2 Parts resin to 1 Part Activator, by volume/weight ) that cures at room temperature with little to no blush to a tough, rigid, impact resistant plastic, with excellent resistance to water, chemicals, and solvents. This material is suitable for use in mechanical volume pumps, always mix these materials thoroughly and be sure to scrape the sides and bottom. As with all adhesive type compounds proper surface preparation is essential for good bond strength, additionally recoating of this material should be accomplished before the material is thoroughly cured generally in less then 24 hours. If the material has cured hard and tack free, a sanding and solvent wash will be necessary before recoating. |
EBALTA 120/GL是一种低粘性双组分环氧树脂,具有高强度和快速固化的特点。由于这种树脂/硬化剂混合物具有良好的浸水和润湿特性,因此最适用于玻璃纤维或碳纤维织物的固体零件。AH 120/GL适用于大面积和厚层压板的层压树脂。由于其几乎无气味和皮肤友好的GL硬化剂,它是最适合作为层压树脂。当混合比为100:40时,玻璃化转变温度(Tg)会升高约15°C,层压板会稍微变硬,抗冲击性也会更好。层压板厚度不应超过6-7 mm。层压树脂在织物、车辆、飞机结构中的应用无填充低粘度、高强度、低放热特性 ebalta 120/GL is a very low-viscous two-component epoxy resin with high strength values and fast curing. Due to its good soaking and wetting characteristics, this resin/hardener mixture is most suitable for solid parts with fabrics made of glass or carbon fibres. AH 120/GL is suitable as laminating resin for both large area- and thick laminates. Due to its almost odourless and skin-friendly GL hardener it is most suitable as laminating resin. With a mixing ratio of 100:40 you reach an about 15°C higher TG, slightly stiffer laminates as well as better impact resistance. The laminate thickness should not exceed 6-7 mm. Applications Laminating resin for fabrics Vehicle construction Aircraft construction Properties unfilled low viscosity high strength low exothermic character |
|
产品描述 | |||
厂家: | 美国Club Kit | 德国Ebalta | |
类别: | 环氧树脂 环氧树脂 | 环氧树脂 环氧树脂 | |
填料: | 玻璃纤维/碳纤维 | 玻璃纤维/碳纤维 | |
用途: | 粘合,层压板,泵件,粘合剂 | 飞机应用,层压板,汽车领域的应用 | |
性能特点: | 机械强度好,韧性好,冲击性能好,吸水率低,粘结性好,耐化学性,可粘结性 Good Rigidity,Good flexibility,High impact resistance,Low or no water absorption,Good bond,Solvent resistance,Agglomerability | 机械强度好,低放热性,低粘度,低VOC,快速固化 Good Rigidity,Low Exotherm,Low Viscosity,Low odor,Fast Cure | |
加工条件: |
备注 |
1 一般属性:这些不能被视为规格。
|
1 一般属性:这些不能被视为规格。
2 200 g
|
价格走势对比图
环氧树脂 Clear Cote™ TECHNO-COTE™
环氧树脂 Ebalta AH 120 / GL
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交