EAA，ALKAMIX™ MB-6003对比EAA，PRIMACOR™ 3150物性表,价格行情_搜料

牌号信息	ALKAMIX™ MB-6003 物性表 EAA & 澳大利亚凯诺斯指导价格：暂无塑料库存：缺货	PRIMACOR™ 3150 物性表 EAA & 美国陶氏指导价格：暂无塑料库存：缺货
牌号简介	ALKAMIX™ MB-6003是一种基于2%浓度的乙氧基化烷基胺化合物的抗静电母粒。在挤出过程中可向聚乙烯中添加ALKAMIX™ MB-6003，以帮助在随后的膜转换过程中消散静电荷积聚。对于小于100微米的仪表，建议的添加量为3%，对于大于100微米和小于400微米的仪表，建议添加量为2%。但是，当添加到非常高的滑膜等级时，必须小心，因为滑片（芥酸酰胺或油酰胺）和抗静电添加剂（乙氧基化胺）都是表面迁移的，它们在膜表面的组合可能会导致处理、密封、印刷或其他后挤压工艺的问题。当添加到不含任何其他添加剂的聚乙烯配方中时，根据良好生产实践和确保符合美国食品和药品管理局法规CFR21要求的最大添加量为ALKAMIX™ MB-6003。转换器必须对使用该材料作为部件制造的成品的适用性以及对给定限制的遵守情况进行验证，以确保符合所有相关法规。整体迁移限制可适用于成品。 ALKAMIX™ MB-6003 is an antistatic masterbatch based on an Ethoxylated Alkyl Amine compound at a concentration of 2 percent. ALKAMIX™ MB-6003 can be added to polyethylene during extrusion to assist in dissipation of static charge build-up during subsequent conversion of the film. The recommended addition level is 3 percent for gauges less than 100 micron and 2 percent for gauges greater than 100 micron and less than 400 micron. However, care must be taken when added to very high slip film grades, as both slip (Erucamide or Oleamide) and the antistatic additive (an ethoxylated amine) are surface migratory and their combination on the surface of the film could result in problems with treatment, sealing, printing or other post extrusion processes. The maximum level of addition of ALKAMIX™ MB-6003 based on both good manufacturing practice and to ensure conformance to the requirements to the United States Food and Drug Administration Regulations CFR21 is 4 percent, when added to a polyethylene formulation free of any other additives. The suitability of finished articles manufactured using this material as a component, and the observance of given limitations, must be verified by the converter for each application to ensure compliance with all relevant regulations. An overall migration limit may apply to the finished article.	PRIMACOR™ 3150是一种乙烯-丙烯酸共聚物，设计用于软包装应用的挤出/共挤涂层和层压树脂。它对金属、纸张和聚乙烯基材具有优异的粘附性，并具有良好的下拉性、热密封性和耐油和耐油脂性。对于挤压/共挤涂层和层压应用，金属、纸张和聚乙烯基材的粘附性符合：美国FDA 21 CFR 177.1310（a）（1）欧盟，第10/2011号，有关完整细节，请参考法规。 PRIMACOR™ 3150 is an ethylene acrylic acid copolymer designed for extrusion/coextrusion coating and laminating resin for flexible packaging applications. It provides excellent adhesion to metallic, paper and polyethylene substrates, and offers good draw- down, heat sealability and oil and grease resistance. For extrusion/coextrusion coating and laminating applications Adhesion to metallic, paper and polyethylene substrates Cost effective sealant or tie resin for foil-based structures Moisture insensitivity Complies with: U.S. FDA 21 CFR 177.1310(a)(1) EU, No 10/2011 Consult the regulations for complete details.

产品描述
厂家：	澳大利亚凯诺斯 Qenos	美国陶氏 DOW
类别：	EAA EAA	EAA EAA
填料：
用途：	母料
性能特点：	抗静电 Antistatic property
加工条件：		挤出涂层