PC，Makrolon® Sheet UV对比PC，Makrolon® Sheet GP物性表,价格行情_搜料

牌号信息	Makrolon® Sheet UV 物性表 PC & 德国科思创指导价格：暂无塑料库存：缺货	Makrolon® Sheet GP 物性表 PC & 德国科思创指导价格：暂无塑料库存：缺货
牌号简介	模克隆紫外线板是一种透明的聚碳酸酯产品，采用先进的抗紫外线技术，确保在平玻璃和曲面玻璃应用中具有持久的户外耐候性能。它比丙烯酸和玻璃具有更高的抗冲击性，安装时可冷弯成型。模克隆紫外线是生产具有高光学质量和最小的失真清晰，一系列标准的建筑色彩，或可定制匹配任何颜色。模克隆紫外线有一个十（10）年的产品保修期，针对破损，发黄和光传输损失。保修条款可根据要求提供。适用于雨篷、入口天篷、天窗、桶形拱顶、上釉拱门、有盖人行道以及倾斜、垂直和弯曲的玻璃。 Makrolon® UV sheet is a transparent polycarbonate product with an advanced UV resistance technology that assures long lasting outdoor weathering performance in flat and curved glazing applications. It has higher impact resistance than acrylic and glass, and it can be cold-formed during installation. Makrolon UV is produced with high optical quality and minimal distortion in clear, a range of standard architectural tints, or can be custom matched to any color. Makrolon UV has a ten (10) year Limited Product Warranty against breakage, yellowing, and loss of light transmission. The terms of the warranty are available upon request. Applications Awnings, entryway canopies, skylights, barrel vaults, glazed archways, covered pedestrian walkways, and sloped, vertical, and curved glazing	模克隆GP片材是一种抛光表面，紫外线稳定，透明的聚碳酸酯产品。它具有卓越的冲击强度、卓越的尺寸稳定性、耐高温性和高清晰度。这种轻质热成型板也容易制造和装饰。模克隆GP表提供五（5）年的产品破损有限保修。保修条款可根据要求提供。应用工业玻璃、机械防护装置、结构件、热成型和装配部件 Makrolon® GP sheet is a polished surface, UV stabilized, transparent polycarbonate product. It features outstanding impact strength, superior dimensional stability, high temperature resistance, and high clarity. This lightweight thermoformable sheet is also easy to fabricate and decorate. Makrolon GP sheet is offered with a five (5) year Limited Product Warranty against breakage. The terms of the warranty are available upon request. Applications Industrial glazing, machine guards, structural parts, thermoformed and fabricated components

产品描述
厂家：	德国科思创 Covestro	德国科思创 Covestro
类别：	PC Polycarbonate	PC Polycarbonate
填料：
用途：	装配玻璃	构件,热成型应用,装配玻璃,工业应用
性能特点：	耐候抗UV,透光性好,冲击性能好 Weather resistance is good,Good Clarity,High impact resistance	耐候抗UV,透光性好,冲击性能好,尺寸稳定性好,耐高温,防火阻燃等级HB,防火阻燃等级V-0 Weather resistance is good,Good Clarity,High impact resistance,Good Dimensional Stability,High Heat Resistance,HB,V-0
加工条件：		热成型 Thermo forming

技术参数

物理性能
PHYSICAL Makrolon® Sheet UV Makrolon® Sheet GP 单位
UNIT 测试方法
TEST METHOD

吸水率(24hr)
Water absorption rate % ASTM D570

密度
Density g/cm³ ASTM D792

冲击性能
IMPACT Makrolon® Sheet UV Makrolon® Sheet GP 单位
UNIT 测试方法
TEST METHOD

悬臂梁无缺口冲击强度(3.2 mm)
Notched impact strength of cantilever beam ASTM D256

悬臂梁缺口冲击强度(3.2mm)
Impact strength of cantilever beam notch J/m ASTM D256

装有测量仪表的落镖冲击(3.18 mm)
Dart impact equipped with measuring instruments J ASTM D3763

热性能
THERMAL Makrolon® Sheet UV Makrolon® Sheet GP 单位
UNIT 测试方法
TEST METHOD

U Factor(Summer：5.99 mm)
U Factor BTU/hr/ft²/°F NFRC 100-2010

U Factor(Summer：9.53 mm)
U Factor BTU/hr/ft²/°F NFRC 100-2010

U Factor(Winter：5.99 mm)
U Factor BTU/hr/ft²/°F NFRC 100-2010

U Factor(Winter：9.53 mm)
U Factor BTU/hr/ft²/°F NFRC 100-2010

导热系数
Thermal conductivity coefficient W/m/K ASTM C177

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

线性热膨胀系数(MD)
Linear coefficient of thermal expansion 1/℃ ASTM D696

脆化温度
Embrittlement temperature ℃ ASTM D746

遮阳系数(Clear：5.99 mm)
Sunshade coefficient NFRC 100-2010

遮阳系数(Gray or Bronze：5.99 mm)
Sunshade coefficient NFRC 100-2010

电气性能
ELECTRICAL Makrolon® Sheet UV Makrolon® Sheet GP 单位
UNIT 测试方法
TEST METHOD

介电常数(10 Hz)
Dielectric constant ASTM D150

介电常数(60 Hz)
Dielectric constant ASTM D150

介电强度(3.18 mm，在空气中)
Dielectric strength kV/mm ASTM D149

体积电阻率
Volume resistivity ohms·cm ASTM D257

耐电弧性(--)
Arc resistance sec ASTM D495

耗散因数(60 Hz)
Dissipation factor ASTM D150

阻燃性能
FLAMMABILITY Makrolon® Sheet UV Makrolon® Sheet GP 单位
UNIT 测试方法
TEST METHOD

Flash Ignition Temperature
Flash Ignition Temperature ℃ ASTM D1929

Horizontal Burn(AEB)
Horizontal Burn（AEB） cm ASTM D635

自燃温度
Autoignition temperature ℃ ASTM D1929

阻燃等级(1.50 mm)
Flame retardant level UL 94

阻燃等级(10.00 mm)
Flame retardant level UL 94

光学性能
OPTICAL Makrolon® Sheet UV Makrolon® Sheet GP 单位
UNIT 测试方法
TEST METHOD

折射率
Refractive index ASTM D542

透光率(3000 µm)
Transmittance % ASTM D1003

机械性能
MECHANICAL Makrolon® Sheet UV Makrolon® Sheet GP 单位
UNIT 测试方法
TEST METHOD

剪切强度(--)
shear strength MPa ASTM D732

剪切模量
shear modulus MPa ASTM D732

压缩强度
compressive strength MPa ASTM D695

压缩模量
Compression modulus MPa ASTM D695

弯曲强度
bending strength MPa ASTM D790

弯曲模量
Bending modulus MPa ASTM D790

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa ASTM D638

拉伸强度(极限)
tensile strength MPa ASTM D638

拉伸模量
Tensile modulus MPa ASTM D638

泊松比
Poisson's ratio ASTM E132

洛氏硬度(M 级)
Rockwell hardness ASTM D785

洛氏硬度(R 级)
Rockwell hardness ASTM D785

耐磨耗性(Delta Haze)
Wear resistance % ASTM D1044

备注

1 一般属性：这些不能被视为规格。

2 Yield

3 Ultimate

4 100 Cycles, CS-10F Wheel, 500 g load

5 Tungsten Electrodes

6 Steel Strip Electrode

7 K09 Bronze

8 I35 Dark Gray

9 Clear

10 I30 Gray

1 一般属性：这些不能被视为规格。

2 Yield

3 Ultimate

4 Tungsten Electrodes

5 Steel Strip Electrode

6 K09 Bronze

7 I35 Dark Gray

8 Clear

9 I30 Gray


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
电气性能
阻燃性能
光学性能
机械性能
加工方式
备注
返回顶部

PC，Makrolon® Sheet UV对比PC，Makrolon® Sheet GP对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别