LDPE，SABIC® LDPE PCG07对比LDPE，SABIC® LDPE 2008N0物性表,价格行情_搜料

牌号信息	SABIC® LDPE PCG07 物性表 LDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货	SABIC® LDPE 2008N0 物性表 LDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	SABIC LDPE PCG07用于医疗应用的SABIC LDPE等级在受控条件下生产，因此产品质量高、一致性好、纯度高。SABIC® LDPE PCG07是一种无添加剂等级，通常设计用于医疗包装，通常可通过注射成型和铸膜进行转换，以生产盖、盖和二次包装。符合法规SABIC® LDPE PCG07符合欧洲药典（EP）和美国药典（USPVI）的相关专著。SABIC LDPE PCG07医疗保健用低密度聚乙烯说明SABIC LDPE用于医疗保健的等级是在受控条件下生产的，从而产生高质量的产品。柔弱和高纯度。SABIC® LDPE PCG07是一种无添加剂等级，通常设计用于医疗包装，通常可通过注射成型和铸膜进行转换，以生产盖、盖和二次包装。符合法规SABIC® LDPE PCG07符合欧洲药典（EP）和美国药典（USPVI）的相关专著。本发明所述产品不得用于医疗保健设备或用于人体内临时或永久实施的材料。 SABIC® LDPE PCG07 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures and secondary packaging. Compliance to Regulations SABIC® LDPE PCG07 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). SABIC® LDPE PCG07 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG07 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding and Cast Film to produce caps and closures and secondary packaging. Compliance to Regulations SABIC® LDPE PCG07 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.	SABIC® LDPE 2008N0是不含添加剂的低密度聚乙烯管级。SABIC LDPE 2008TN00采用SABIC清洁管式反应器（CTR）技术生产，确保产品纯度高。它具有高韧性、良好的柔韧性和合理的抗环境应力开裂性，因此通常用于柔韧性和坚硬物品。应用SABIC® LDPE 2008N0通常适用于注塑应用，常用于盖和封口。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。 SABIC® LDPE 2008N0 is a LDPE tubular grade without additives. SABIC® LDPE 2008TN00 is produced using SABIC Clean Tubular Reactor (CTR) Technology which ensure grades with high purity. It exhibits high toughness with good flexibility and reasonable environmental stress cracking resistance and is therefore typically used for flexibles and tough articles. Application SABIC® LDPE 2008N0 is typically suitable for injection moulding application, frequently used for caps & closures. This product is not intended for and must not be used in any pharmaceutical/medical applications.

产品描述
厂家：	沙特沙伯基础 SABIC	沙特沙伯基础 SABIC
类别：	LDPE LDPE	LDPE LDPE
填料：
用途：	薄膜,外壳,医用包装,流延薄膜,护罩,医疗/护理用品	外壳,母料,护罩,复合
性能特点：	高纯度,低密度 High purity,Low density	韧性好,高纯度,低密度,抗应力开裂 Good flexibility,High purity,Low density,High ESCR
加工条件：	注射成型 Injection Molding	复合

技术参数

物理性能
PHYSICAL SABIC® LDPE PCG07 SABIC® LDPE 2008N0 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ISO 1183

熔体体积流动速率(190℃，2.16 kg)
Melt Volume Rate cm³/10min

熔体体积流动速率(190℃，5 kg)
Melt Volume Rate cm³/10min

熔体质量流动速率(190℃，2.16kg)
Melt Flow Rate g/10min

熔体质量流动速率(190℃，2.16kg)
Melt Flow Rate g/10min ISO 1133

熔体质量流动速率(190℃，5.0kg)
Melt Flow Rate g/10min

熔体质量流动速率(190℃，5.0kg)
Melt Flow Rate g/10min ISO 1133

热性能
THERMAL SABIC® LDPE PCG07 SABIC® LDPE 2008N0 单位
UNIT 测试方法
TEST METHOD

Enthalpy Change
Enthalpy Change J/g DIN 53765

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/B

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/Bf

熔融温度
Melting temperature ℃ ISO 11357-3

熔融温度(DSC)
Melting temperature ℃ DIN 53765

维卡软化温度
Vicat Softening Temp ℃ ISO 306/A

维卡软化温度(A50)
Vicat Softening Temp ℃ ISO 306/A50

冲击性能
IMPACT SABIC® LDPE PCG07 SABIC® LDPE 2008N0 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(-30℃)
Impact strength of cantilever beam notch kJ/m² ISO 180-1A

悬臂梁缺口冲击强度(-30℃，注塑成型)
Impact strength of cantilever beam notch kJ/m²

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch kJ/m² ISO 180-1A

悬臂梁缺口冲击强度(23℃，注塑成型)
Impact strength of cantilever beam notch kJ/m²

机械性能
MECHANICAL SABIC® LDPE PCG07 SABIC® LDPE 2008N0 单位
UNIT 测试方法
TEST METHOD

拉伸应变(断裂，23℃)
Tensile strain % ISO 527-2

拉伸应变(断裂，注塑成型)
Tensile strain % ISO 527-2/50

拉伸强度(23℃)
tensile strength MPa ISO 527-2

拉伸强度(屈服，注塑成型)
tensile strength MPa

拉伸强度(断裂，注塑成型)
tensile strength MPa

拉伸模量(23℃)
Tensile modulus MPa ISO 527-2

拉伸模量(注塑成型)
Tensile modulus MPa ISO 527-2/50

邵氏硬度(邵氏 D)
Shore hardness ISO 868

邵氏硬度(邵氏 D，注塑成型)
Shore hardness ISO 868

备注

1 一般属性：这些不能被视为规格。

2 Conditioning of test specimen: temp. 23 °C, relative humidity 50 %, 24 hours

1 一般属性：这些不能被视为规格。


相关资讯

牌号简介
产品描述
技术参数
物理性能
热性能
冲击性能
机械性能
加工方式
备注
返回顶部

LDPE，SABIC® LDPE PCG07对比LDPE，SABIC® LDPE 2008N0对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别