PEEK，TECAPEEK® PVX对比PEEK，TECAPEEK® TECAPEEK®物性表,价格行情_搜料

牌号信息	TECAPEEK® PVX 物性表 PEEK & 德国恩欣格指导价格：暂无塑料库存：缺货	TECAPEEK® TECAPEEK® 物性表 PEEK & 德国恩欣格指导价格：暂无塑料库存：缺货
牌号简介	TECAPEEK® PVX是一种超高性能轴承材料，它结合了优质多指标基体材料的性能和最佳的特定磨损增强添加剂。该配方将连续使用温度提高约40°F，并在保持良好耐化学性的同时增加极限pv。当用作非金属轴承时，TECAPEEK® PVX提供了极好的摩擦学性能范围。它的设计是为了在恶劣的环境中以高负荷和高速度运行，无论是干燥的还是润滑的。TECAPEEK® PVX的特殊性能使其成为最苛刻应用和最恶劣条件下轴承表面的理想材料。工业、汽车、海洋、核、石油和航空航天工业的应用从其使用中获得了巨大的好处。 TECAPEEK® PVX is an ultra high performance bearing material that incorporates the properties of a premium polymetric matrix material with optimum levels of specific wear enhancing additives. This formulation raises the continuous use temperature by approximately 40°F and increases the limiting PV while maintaining excellent chemical resistance. When used as a non-metallic bearing, TECAPEEK® PVX offers a superb range of tribiological performance. It is designed to run at high loads and speeds, in hostile environments, either dry or lubricated. TECAPEEK™ PVX'S exceptional properties make it an ideal material for bearing surfaces in the most demanding applications and in the harshest conditions. Industrial, automotive, marine, nuclear, petroleum and aerospace industry applications realize great benefits from its use. Excellent high temperature performance Flammability is UL94 V-O with a low limiting O2 index (-40%) and very low smoke generation Can be used dry against hard or soft mating surfaces Excellent weather resistance Resistant to gamma radiation Complies with specific provisions of ASTM D6262-98 Available in a wide range of sizes, extruded in rod and plate for subsequent machined parts	Tecapeek股票形状完全由Victrex Peek聚合物制成。Tecapeek是一种独特的半结晶高温工程热塑性塑料。它是一种很好的材料，适用于热、化学和燃烧性能对性能至关重要的广泛应用。在这方面尤为重要的是，Tecapeek能够在超过250°C（482°F）的高温下保持其弯曲和拉伸性能。添加玻璃纤维或碳纤维增强材料可增强基本Tecapeek材料的机械和热性能。Tecapeek卓越的性能特点使其能够应用于一般工业的许多关键领域，以及汽车、海洋、核、油井、电子、医疗和航空航天领域。 TECAPEEK® stock shapes are made exclusively with Victrex PEEK polymer. TECAPEEK is a unique, semi-crystalline, high temperature engineering thermoplastic. It is an excellent material for a wide spectrum of applications where thermal, chemical, and combustion properties are critical to performance. Especially significant in this regard is TECAPEEK's ability to retain its flexural and tensile properties at very high temperatures in excess of 250°C (482°F). The addition of glass fiber or carbon fiber reinforcements enhances the mechanical and thermal properties of the basic TECAPEEK® material. TECAPEEK™s exceptional property profile enables it to be utilized in many of the most critical areas in general industry, as well as in the automotive, marine, nuclear, oil well, electronics, medical and aerospace fields.

产品描述
厂家：	德国恩欣格 Ensinger	德国恩欣格 Ensinger
类别：	PEEK PEEK	PEEK PEEK
填料：
用途：	汽车领域的应用,工业应用,船舶应用,核能应用,石油/天然气用品,航空航天应用	汽车领域的应用,电气/电子应用领域,医疗/护理用品,石油/天然气用品,航空航天应用,船舶应用,核能应用,工业应用
性能特点：	耐候抗UV,低烟,抗伽马射线,耐高温,耐磨,耐化学性,防火阻燃等级V-0 Weather resistance is good,Low smoke,Gamma radiation,High Heat Resistance,Good wear resistance,Solvent resistance,V-0	冲击性能好,低烟,耐水解,抗伽马射线,耐高温,半结晶,耐磨,耐化学性,防火阻燃等级V-0 High impact resistance,Low smoke,Hydrolysis stability,Gamma radiation,High Heat Resistance,Hypocrystalline,Good wear resistance,Solvent resistance,V-0
加工条件：

技术参数

物理性能
PHYSICAL TECAPEEK® PVX TECAPEEK® TECAPEEK® 单位
UNIT 测试方法
TEST METHOD

吸水率(23℃，24hr)
Water absorption rate %

吸水率(饱和，23℃)
Water absorption rate %

密度
Density g/cm³ ASTM D792

冲击性能
IMPACT TECAPEEK® PVX TECAPEEK® TECAPEEK® 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256

热性能
THERMAL TECAPEEK® PVX TECAPEEK® TECAPEEK® 单位
UNIT 测试方法
TEST METHOD

导热系数
Thermal conductivity coefficient W/m/K ASTM C177

热变形温度(1.8 MPa，未退火，6.35 mm)
Hot deformation temperature ℃ ASTM D648

熔融温度
Melting temperature ℃

线性热膨胀系数(MD)
Linear coefficient of thermal expansion 1/℃ ASTM D696

连续使用温度
Continuous use temperature ℃

电气性能
ELECTRICAL TECAPEEK® PVX TECAPEEK® TECAPEEK® 单位
UNIT 测试方法
TEST METHOD

介电强度
Dielectric strength kV/mm ASTM D149

体积电阻率(23℃)
Volume resistivity ohms·cm ASTM D257

表面电阻率
Surface resistivity ohms ASTM D257

阻燃性能
FLAMMABILITY TECAPEEK® PVX TECAPEEK® TECAPEEK® 单位
UNIT 测试方法
TEST METHOD

阻燃等级
Flame retardant level UL 94

补充信息
TECAPEEK® PVX TECAPEEK® TECAPEEK® 单位
UNIT 测试方法
TEST METHOD

memo_intro
memo_intro

限压速度
Pressure limiting speed

限压速度(1200 in/min，20℃)
Pressure limiting speed psi·fpm

机械性能
MECHANICAL TECAPEEK® PVX TECAPEEK® TECAPEEK® 单位
UNIT 测试方法
TEST METHOD

Wear Rate
Wear Rate in/min

剪切强度(23℃)
shear strength MPa ASTM D3846

压缩强度(23℃)
compressive strength MPa ASTM D695

弯曲强度(23℃)
bending strength MPa ASTM D790

弯曲模量(23℃)
Bending modulus MPa ASTM D790

弯曲模量(正切，23℃)
Bending modulus MPa ASTM D790

拉伸应变(屈服，23℃)
Tensile strain %

拉伸应变(断裂，23℃)
Tensile strain %

拉伸应变(断裂，23℃)
Tensile strain % ASTM D638

拉伸强度(屈服，23℃)
tensile strength MPa ASTM D638

拉伸模量(1% 正割，23℃)
Tensile modulus MPa ASTM D638

摩擦系数
friction coefficient

摩擦系数
friction coefficient ASTM D1894

洛氏硬度(M 级)
Rockwell hardness ASTM D785

备注

1 一般属性：这些不能被视为规格。

2 @ 68°F, 1200 in/min, 155 lbs Load

1 一般属性：这些不能被视为规格。

2 @ 68°F, 1200 in/min, 155 lbs Load


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
电气性能
阻燃性能
补充信息
机械性能
加工方式
备注
返回顶部

PEEK，TECAPEEK® PVX对比PEEK，TECAPEEK® TECAPEEK®对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别