PCTG，Tritan™ EX401对比 PCTG，Tritan™ MX810物性表,价格行情_搜料

牌号信息	Tritan™ EX401 物性表 PCTG & 美国伊士曼指导价格：67200.0元/吨塑料库存： 100kg	Tritan™ MX810 物性表 PCTG & 美国伊士曼指导价格：暂无塑料库存：缺货
牌号简介	Tritan™ EX401是专门为婴儿护理市场开发的无定形共聚酯，具有优异的外观和清晰度。Tritan™ EX401含有从蔬菜来源中提取的霉菌释放物。其最突出的特点是透明度、优良的韧性、水解稳定性、耐热性和耐化学性。Tritan™ EX401通过沸水或微波蒸汽灭菌满足婴儿护理灭菌要求。这一新一代共聚酯也可以在不加入高水平残余应力的情况下被模铸成各种应用。与三元共聚酯的优异的耐化学性和水解稳定性相结合，这些特征使模塑产品在洗碗机环境中增强了耐久性，从而可以将产品暴露于高热量、湿度和积极的清洗剂中。Tritan™ EX401可以通过注射成型、注射拉伸吹塑成型（ISBM）和挤出吹塑成型技术转化为零件。根据美国食品药品监督管理局（FDA）的规定，Tritan™ EX401共聚酯可用于反复使用的食品接触物品中。有关全球食品接触监管许可的详细信息，请联系Eastman代表。Eastman Tritan™ EX401共聚酯包含在Eastman Chemical公司的客户通知程序中，该程序详细说明了当Tritan™ EX401销售给婴儿护理市场时，我们的客户通知政策。这一过程为婴幼儿护理行业提供了一个在TrTIAN的一贯质量和性能方面的信心的附加层。 Tritan™ EX401, specifically developed for the Infant Care market, is an amorphous copolyester with excellent appearance and clarity. Tritan™ EX401 contains a mold release derived from vegetable based sources. Its most outstanding features are clarity, excellent toughness, hydrolytic stability, and heat and chemical resistance. Tritan™ EX401 meets infant care sterilization requirements via boiling water or microwave steam sterilization. This new-generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Combined with Tritan™ copolyester's outstanding chemical resistance and hydrolytic stability, these features give molded products enhanced durability in the dishwasher environment, which can expose products to high heat, humidity, and aggressive cleaning agents. Tritan™ EX401 can be converted into parts using injection molding, injection stretch blow molding (ISBM), and extrusion blow molding techniques. Tritan™ EX401 copolyester may be used in repeated use food contact articles under United States Food and Drug Administration (FDA) regulations. Contact Eastman representative for details on global food contact regulatory clearances. Eastman Tritan™ EX401 copolyester is included in Eastman Chemical Company's Customer Notification Procedure which details our policy for customer notification when significant changes are made in Tritan™ EX401 sold into the infant care market. This procedure provides the infant care industry an added layer of confidence in the consistent quality and performance of Tritan.	伊斯曼Tritan™ MX810是一种无定形共聚酯，具有优异的外观和清晰度。其最突出的特点是优良的韧性、水解稳定性、耐热性和耐化学性。这一新一代共聚酯也可以在不加入高水平残余应力的情况下被模铸成各种应用。伊士曼TrTITE共聚酯MX810已经测试了FDA / ISO 10993和USP VI类生物评价测试后，γ和ETO灭菌。 Eastman Tritan™ MX810 is an amorphous copolyester with excellent appearance and clarity. Its most outstanding features are excellent toughness, hydrolytic stability, and heat and chemical resistance. This new generation copolyester can also be molded into various applications without incorporating high levels of residual stress. Eastman Tritan™ Copolyester MX810 has been tested for FDA/ISO 10993 and USP Class VI Biological Evaluation testing after Gamma and ETO sterilization.

产品描述
厂家：	美国伊士曼 Eastman	美国伊士曼 Eastman
类别：	PCTG PCTG	PCTG PCTG
填料：
用途：	瓶子,橡皮奶头,婴儿护理	医疗器械,医疗/护理用品
性能特点：	易加工,透光性好,韧性好,表面光泽度好,冲击性能好,蒸汽消毒,耐水解,含脱模剂,食品接触,耐高温,共聚物,耐化学性,无定形的 Excellent Processability,Good Clarity,Good flexibility,Good surface appearance,High impact resistance,Steam sterilized,Hydrolysis stability,Good stripping performance,Food contact compliance,High Heat Resistance,Copolymer,Solvent resistance,Amorphous	易加工,透光性好,韧性好,冲击性能好,耐水解,成型周期快,耐高温,辐射消毒,耐化学性,环氧乙烷消毒,无定形的 Excellent Processability,Good Clarity,Good flexibility,High impact resistance,Hydrolysis stability,Quick molding cycle,High Heat Resistance,Radiation disinfection,Solvent resistance,Ethylene oxide disinfection,Amorphous
加工条件：	注塑拉伸吹塑 Injection Stretch Blow Molding

技术参数

物理性能
PHYSICAL Tritan™ EX401 Tritan™ MX810 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D792

收缩率(MD)
Shrinkage rate % ASTM D955

收缩率(MD：吹塑成型)
Shrinkage rate % 内部方法

收缩率(注塑成型)
Shrinkage rate % ASTM D955

冲击性能
IMPACT Tritan™ EX401 Tritan™ MX810 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(-40℃)
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(-40℃)
Impact strength of cantilever beam notch kJ/m² ISO 180

悬臂梁缺口冲击强度(-40℃)
Impact strength of cantilever beam notch ASTM D4812

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m 内部方法

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch kJ/m² ISO 180

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch ASTM D4812

装有测量仪表的落镖冲击(-40℃，Energy at Max Load)
Dart impact equipped with measuring instruments J ASTM D3763

装有测量仪表的落镖冲击(23℃，Energy at Max Load)
Dart impact equipped with measuring instruments J ASTM D3763

热性能
THERMAL Tritan™ EX401 Tritan™ MX810 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

光学性能
OPTICAL Tritan™ EX401 Tritan™ MX810 单位
UNIT 测试方法
TEST METHOD

透光率(总计)
Transmittance % ASTM D1003

雾度
Haze % ASTM D1003

雾度(--)
Haze % ASTM D1003

雾度(--)
Haze % 内部方法

补充信息
Tritan™ EX401 Tritan™ MX810 单位
UNIT 测试方法
TEST METHOD

Microwave Boiling(Oven Power)
Microwave Boiling（Oven Power） Watts Internal Method

Microwave Steam Sterilization(Total Energy)
Microwave Steam Sterilization（Total Energy） W-min Internal Method

冷热冲击测试(Water Immersion，35 to 98℃)
Thermal Shock Test Internal Method

填充体积收缩(Boiling，1 hr)
Fill volume shrinkage % Internal Method

填充体积收缩(Boiling，2 hr)
Fill volume shrinkage % Internal Method

填充体积收缩(Dishwasher)
Fill volume shrinkage % Internal Method

机械性能
MECHANICAL Tritan™ EX401 Tritan™ MX810 单位
UNIT 测试方法
TEST METHOD

弯曲强度(屈服，23℃)
bending strength MPa ASTM D790

弯曲模量(23℃)
Bending modulus MPa ASTM D790

弯曲模量(23℃)
Bending modulus MPa ISO 178

拉伸应变(屈服，23℃)
Tensile strain % ASTM D638

拉伸应变(屈服，23℃)
Tensile strain % ISO 527-2

拉伸应变(屈服，23℃)
Tensile strain % 内部方法

拉伸应变(断裂，23℃)
Tensile strain % ASTM D638

拉伸应变(断裂，23℃)
Tensile strain % ISO 527-2

拉伸强度(屈服，23℃)
tensile strength MPa ASTM D638

拉伸强度(屈服，23℃)
tensile strength MPa ISO 527-2

拉伸强度(屈服，23℃)
tensile strength MPa 内部方法

拉伸强度(断裂，23℃)
tensile strength MPa ASTM D638

拉伸强度(断裂，23℃)
tensile strength MPa ISO 527-2

拉伸模量(23℃)
Tensile modulus MPa ASTM D638

拉伸模量(23℃)
Tensile modulus MPa ISO 527-2

洛氏硬度(R 级)
Rockwell hardness ASTM D785

加工方式

注射 Tritan™ EX401 Tritan™ MX810 单位测试方法

加工熔体温度 °C

干燥时间 hr

干燥温度 °C

模具温度 °C

挤出 Tritan™ EX401 Tritan™ MX810 单位测试方法

熔体温度 °C

备注

1 一般属性：这些不能被视为规格。

2 After re-equilibration

3 After 8 hr boiling

4 ISBM Bottle

1 一般属性：这些不能被视为规格。


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
光学性能
补充信息
机械性能
加工方式
注射
挤出
备注
返回顶部

PCTG，Tritan™ EX401对比 PCTG，Tritan™ MX810对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别