PP共聚，Hostacom BA16G对比PP共聚，Prime PP COPP 792物性表,价格行情_搜料

牌号信息	Hostacom BA16G 物性表 PP共聚 & 荷兰利安德巴塞尔指导价格：暂无塑料库存：缺货	Prime PP COPP 792 物性表 PP共聚 & 美国Primex Plastics 指导价格：暂无塑料库存：缺货
牌号简介	Hostacom BA16G部分熔融流动，1000兆帕弯曲模量，紫外线稳定，挤出级聚丙烯共聚物具有良好的灵活性，抗冲击性，着色性和加工性的平衡。它是为需要长时间户外服务的挤压部件而设计的。 Hostacom BA16G fractional melt flow, 1,000 MPa flexural modulus, UV-stabilized, extrusion grade polypropylene copolymer has a good balance of flexibility, impact resistance, colorability and processability. It was designed for extruded components that require long periods of outdoor service.	本产品是一种部分熔融聚丙烯，专为挤出应用而设计，具有较高的挤出物熔融强度、良好的抗冷冲击性、刚度和冲击平衡性。它还具有更好的光学性能、更高的柔韧性和与均聚物PP相同的耐化学性。应用：Prime Copp 792是家庭、医疗和食品用具的理想选择。加工：原铜792可以是固相或熔融相形成。最好采用熔相成型工艺，成型温度为350°F。滚压送料机的模具温度应为50-90°F，切割板机的模具温度应为90-150°F。模具收缩率约为0.015-0.018英寸/英寸。零件应在低于190°F的温度下进行去模。表面处理：较薄的板材<.040易于修整，冷却时间为1-2分钟。较薄的薄片可以用钢尺模修整。较厚的板材需要几分钟的冷却时间，应使用剪切模具进行修整。工具和模具间隙应小于0.005英寸。对于印刷或喷漆，需要进行电晕或火焰表面处理。请与Primex塑料公司代表联系，了解有关表面处理、制造或热成型工艺的更多信息。颜色、纹理和功能：Prime Co PP 792可根据您的具体要求进行颜色匹配。纹理包括：光滑/光滑、光泽/暗淡、Levant L&II、HC和小腿纹理。厚度从0.010到0.500不等，宽度高达96“。 This product is a fractional melt PP that is designed for extrusion applications with features of high extrudate melt strength, good cold impact resistance, stiffness and and impact balance. It also offers better optical properties, increased flexibility, and the same chemical resistance as Homopolymer PP. Applications: Prime COPP 792 is ideal for home, medical and food ware. Processing: Prime COPP 792 can be solid phase or melt phase formed. The melt phase forming process is preferred, with a forming temperature of 350°F. The mold temperature should be 50-90°F for roll fed machines and 90-150°F for cut sheet machines. The mold shrink is about .015 - .018 in/in. Parts should be de-molded <190°F. Finishing: Thinner sheet <.040 is easily trimmed with 1- 2 minutes of cooling time. Thinner sheet can be trimmed with a steel rule die. Thicker sheet will require several minutes of cooling time and should be trimmed with a shearing die. Tool and die clearance should be <.005 in. For printing or painting corona or flame surface treating is required. Please contact your Primex Plastics representative for more information on finishing, fabricating, or the thermoforming process. Colors, Textures and Capabilities: Prime CO PP 792 can be color matched to meet your specific requirements. Textures included; Smooth/Smooth, Gloss/Dull, Levant l & II, HC, and Calf Grain. Thicknesses range from .010 - .500 and widths up to 96".

产品描述
厂家：	荷兰利安德巴塞尔 LyondellBasell	美国Primex Plastics
类别：	PP共聚 PP copolymer	PP共聚 PP copolymer
填料：
用途：	型材,片材,室外应用,增强面板	非特定食品应用,家用货品,医疗/护理用品
性能特点：	耐候抗UV,易加工,韧性好,流动性低,冲击性能好,共聚物,着色性好 Weather resistance is good,Excellent Processability,Good flexibility,Low liquidity,High impact resistance,Copolymer,Good coloring	机械强度好,冲击性能好,光学性能,耐高温,熔体强度好,拉伸性能好,共聚物,耐化学性,耐低温冲击,防火阻燃等级HB Good Rigidity,High impact resistance,Optical performance,High Heat Resistance,Good melt strength,Good Tensile Strength,Copolymer,Solvent resistance,low-temperature impact resistance,HB
加工条件：	管路挤出成型	挤出 Extrusion

技术参数

物理性能
PHYSICAL Hostacom BA16G Prime PP COPP 792 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ASTM D792

收缩率(MD：23℃，3.2 mm，48 hrs)
Shrinkage rate % ASTM D955

熔体质量流动速率(230℃，2.16kg)
Melt Flow Rate g/10min ASTM D1238

冲击性能
IMPACT Hostacom BA16G Prime PP COPP 792 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(22℃)
Impact strength of cantilever beam notch ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch J/m ASTM D256-A

落锤冲击(23℃)
Drop hammer impact J ASTM D5420

热性能
THERMAL Hostacom BA16G Prime PP COPP 792 单位
UNIT 测试方法
TEST METHOD

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

热变形温度(1.8 MPa，未退火)
Hot deformation temperature ℃ ASTM D648

机械性能
MECHANICAL Hostacom BA16G Prime PP COPP 792 单位
UNIT 测试方法
TEST METHOD

弯曲模量
Bending modulus MPa ASTM D790

拉伸应变(屈服)
Tensile strain % ASTM D638

拉伸应变(断裂)
Tensile strain % ASTM D638

拉伸强度(屈服)
tensile strength MPa ASTM D638

洛氏硬度(R 级)
Rockwell hardness ASTM D785

阻燃性能
FLAMMABILITY Hostacom BA16G Prime PP COPP 792 单位
UNIT 测试方法
TEST METHOD

0.90 mm
0.90 mm UL 94

补充信息
Hostacom BA16G Prime PP COPP 792 单位
UNIT 测试方法
TEST METHOD

De(mold Temperature)
De（mold Temperature） ℃

成型温度
Forming temperature ℃

模具温度(Cut sheet)
Mold temperature ℃

模具温度(other)
Mold temperature

模具温度(Roll fed)
Mold temperature ℃

备注

1 一般属性：这些不能被视为规格。

2 100x150x3.2 mm

1 一般属性：这些不能被视为规格。

2 > 0.034 in


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
机械性能
阻燃性能
补充信息
加工方式
备注
返回顶部

PP共聚，Hostacom BA16G对比PP共聚，Prime PP COPP 792对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别