LDPE，SABIC® LDPE 1922N0对比LDPE，SABIC® LDPE PCG22物性表,价格行情_搜料

牌号信息	SABIC® LDPE 1922N0 物性表 LDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货	SABIC® LDPE PCG22 物性表 LDPE & 沙特沙伯基础指导价格：暂无塑料库存：缺货
牌号简介	SABIC® LDPE 1922N0是SABIC的CTR管状技术生产的无添加剂低密度聚乙烯等级。该等级通常用于需要高产品质量、一致性和高纯度的食品接触应用。SABIC将提供SABIC® LDPE 1922N0美元的全套食品合规服务。应用。SABIC® LDPE 1922N0通常适用于需要在流动性能和机械性能之间保持良好平衡的应用。本产品不适用于任何医药/医疗应用，也不得用于任何医药/医疗应用。 SABIC® LDPE 1922N0 is an additive free LDPE grade produced by SABIC's CTR® tubular technology. This grade is typically developed for food contact applications that require high product quality, consistency and high level of purity. SABIC will offer for SABIC® LDPE 1922N0 the full food compliance service package. Application. SABIC® LDPE 1922N0 is typically suitable for applications that require a good balance between flow properties and mechanical properties. This product is not intended for and must not be used in any pharmaceutical/medical applications.	SABIC LDPE PCG22用于医疗应用的SABIC LDPE等级在受控条件下生产，因此产品质量高、一致性好，纯度高。SABIC® LDPE PCG22是一种无添加剂等级，通常设计用于医疗包装，通常可以通过注射成型转换为生产盖和封口。由于良好的流动特性，它显示出较高的MFR。符合法规SABIC® LDPE PCG22符合欧洲药典（EP）和美国药典（USPVI）的相关专著。SABIC LDPE PCG22医疗保健用低密度聚乙烯说明SABIC LDPE用于医疗保健的等级在受控条件下生产，导致产品质量高，符合柔弱和高纯度。SABIC® LDPE PCG22是一种无添加剂等级，通常设计用于医疗包装，通常可以通过注射成型转换为生产盖和封口。由于良好的流动特性，它显示出较高的MFR。遵守法规SABLC LDPE PCG22符合欧洲药典的相关专著。本发明所述产品不得用于医疗保健设备或用于人体内临时或永久实施的材料。 SABIC® LDPE PCG22 SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG22 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding to produce caps and closures. It exhibits a high MFR for good flow properties. Compliance to Regulations SABIC® LDPE PCG22 complies with the relevant monographs of the European Pharmacopoeia (EP) and the United States Pharmacopoeia (USPVI). SABIC® LDPE PCG22 Low density polyethylene for Healthcare Description SABIC® LDPE grades for healthcare applications are produced under controlled conditions resulting in high product quality, consistency and a high level of purity. SABIC® LDPE PCG22 is an additive free grade, typically designed for healthcare packaging and can typically be converted by Injection Molding to produce caps and closures. It exhibits a high MFR for good flow properties. Compliance to Regulations SABlC® LDPE PCG22 complies with the relevant monographs of the European Pharmacopoeia. The product mentioned herein may not be used for medical healthcare devices or materials intended for temporary or permanent implementation in the human body.

产品描述
厂家：	沙特沙伯基础 SABIC	沙特沙伯基础 SABIC
类别：	LDPE LDPE	LDPE LDPE
填料：
用途：	母料,非特定食品应用	医疗/护理用品,医用包装,护罩,外壳
性能特点：	高纯度,食品接触,低密度 High purity,Food contact compliance,Low density	高纯度,易流动,低密度 High purity,Good liquidity,Low density
加工条件：	注射成型 Injection Molding	注射成型 Injection Molding

技术参数

物理性能
PHYSICAL SABIC® LDPE 1922N0 SABIC® LDPE PCG22 单位
UNIT 测试方法
TEST METHOD

密度
Density g/cm³ ISO 1183

熔体体积流动速率(190℃，2.16 kg)
Melt Volume Rate cm³/10min

熔体体积流动速率(190℃，5 kg)
Melt Volume Rate cm³/10min

熔体质量流动速率(190℃，2.16kg)
Melt Flow Rate g/10min

熔体质量流动速率(190℃，2.16kg)
Melt Flow Rate g/10min ISO 1133

熔体质量流动速率(190℃，5.0kg)
Melt Flow Rate g/10min

熔体质量流动速率(190℃，5.0kg)
Melt Flow Rate g/10min ISO 1133

冲击性能
IMPACT SABIC® LDPE 1922N0 SABIC® LDPE PCG22 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(-30℃)
Impact strength of cantilever beam notch kJ/m² ISO 180-1A

悬臂梁缺口冲击强度(-30℃，模压成型)
Impact strength of cantilever beam notch kJ/m²

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch kJ/m² ISO 180-1A

悬臂梁缺口冲击强度(23℃，模压成型)
Impact strength of cantilever beam notch kJ/m²

热性能
THERMAL SABIC® LDPE 1922N0 SABIC® LDPE PCG22 单位
UNIT 测试方法
TEST METHOD

Enthalpy Change
Enthalpy Change J/g DIN 53765

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/B

热变形温度(0.45 MPa，未退火)
Hot deformation temperature ℃ ISO 75-2/Bf

熔融温度
Melting temperature ℃ ISO 11357-3

熔融温度(DSC)
Melting temperature ℃ DIN 53765

维卡软化温度
Vicat Softening Temp ℃ ISO 306/A

维卡软化温度(A50)
Vicat Softening Temp ℃ ISO 306/A50

机械性能
MECHANICAL SABIC® LDPE 1922N0 SABIC® LDPE PCG22 单位
UNIT 测试方法
TEST METHOD

拉伸应变(断裂，2 mm，模压成型)
Tensile strain % ISO 527-2/1BA/50

拉伸应变(断裂，23℃)
Tensile strain % ISO 527-2

拉伸强度(23℃)
tensile strength MPa ISO 527-2

拉伸强度(屈服，2 mm，模压成型)
tensile strength MPa

拉伸强度(断裂，2 mm，模压成型)
tensile strength MPa

拉伸模量(2 mm，模压成型)
Tensile modulus MPa ISO 527-2/1BA/50

拉伸模量(23℃)
Tensile modulus MPa ISO 527-2

拉伸蠕变模量(1 hr)
Tensile creep modulus MPa

拉伸蠕变模量(1 Hr)
Tensile creep modulus MPa ISO 899-1

拉伸蠕变模量(1000 hr)
Tensile creep modulus MPa

拉伸蠕变模量(1000 Hr)
Tensile creep modulus MPa ISO 899-1

邵氏硬度(邵氏 D)
Shore hardness ISO 868

邵氏硬度(邵氏 D，模压成型)
Shore hardness ISO 868

备注

1 一般属性：这些不能被视为规格。

2 4mm

1 一般属性：这些不能被视为规格。

2 Compression moulding conditions of test specimen (according to ISO 293) : moulding temp: 160 °C, cooling rate: 40 °C/min Conditioning of test specimen: temp. 23 °C, relative humidity 50 %, 24 hours

3 Test specimen according to ISO 3167, thickness 4 mm Determined at 23 °C, 3 MPa


相关资讯

牌号简介
产品描述
技术参数
物理性能
冲击性能
热性能
机械性能
加工方式
备注
返回顶部

LDPE，SABIC® LDPE 1922N0对比LDPE，SABIC® LDPE PCG22对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别