SQUARE® LIM1520-40A/B
硅橡胶,LSR & 深圳森日
SQUARE® LIM1520-45A/B
硅橡胶,LSR & 深圳森日
牌号信息 |
硅橡胶,LSR & 深圳森日 指导价格:暂无 塑料库存: 缺货 |
硅橡胶,LSR & 深圳森日 指导价格:暂无 塑料库存: 缺货 |
|
牌号简介 |
液体硅橡胶低粘度高压注塑成型材料产品描述2组分液体硅橡胶,适用于耐跟踪性为1A 4.5级,A:B=1:1的注塑成型,耐中高压,铂催化。A的外观是透明的,B是灰色的。关键特点:注塑成型低粘度、高回弹、快速硫化,在20°C温度下具有优异的耐跟踪性,在不透气的条件下,A、B混合后保质期为5天,保质期随着温度的升高而降低。应用套管 Liquid silicone rubber material of low viscosity and pressure injection molding Product Description 2-part liquid silicone rubber, which is suitable for injection molding with tracking resistance 1A 4.5 grade, mixing ratio of parts A:B=1:1, withstanding middle and high voltage, catalyzed by platinum. The appearance of A is transparent and B is grey. Key Features Injection molding Low viscosty High rebound Rapid vulcanization Excellent tracking resistance At the temperature of 20°C and in the condition of air-proof, the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications Bushing |
液体硅橡胶低粘度高压注塑成型材料产品描述2组分液体硅橡胶,适用于耐跟踪性为1A 4.5级,A:B=1:1的注塑成型,耐中高压,铂催化。A的外观是透明的,B是灰色的。关键特点:注塑成型低粘度、高回弹、快速硫化,在20°C温度下具有优异的耐跟踪性,在不透气的条件下,A、B混合后保质期为5天,保质期随着温度的升高而降低。应用套管 Liquid silicone rubber material of low viscosity and pressure injection molding Product Description 2-part liquid silicone rubber, which is suitable for injection molding with tracking resistance 1A 4.5 grade, mixing ratio of parts A:B=1:1, withstanding middle and high voltage, catalyzed by platinum. The appearance of A is transparent and B is grey. Key Features Injection molding Low viscosty High rebound Rapid vulcanization Excellent tracking resistance At the temperature of 20°C and in the condition of air-proof, the shelf life is 5 days after mixing A and B, the shelf life will decrease with the increasing of the temperature. Applications Bushing |
|
产品描述 | |||
厂家: | 深圳森日 SQUARE | 深圳森日 SQUARE | |
类别: | 硅橡胶,LSR 硅橡胶,LSR | 硅橡胶,LSR 硅橡胶,LSR | |
填料: | |||
用途: | 衬套 | 衬套 | |
性能特点: | 低粘度,快速固化,耐电痕 Low Viscosity,Fast Cure,Electric mark | 低粘度,快速固化,耐电痕 Low Viscosity,Fast Cure,Electric mark | |
加工条件: | 液体注射成型 (LIM) Liquid injection molding | 液体注射成型 (LIM) Liquid injection molding |
备注 |
1 一般属性:这些不能被视为规格。
2 B 模具
3 Part A
4 Part B
|
1 一般属性:这些不能被视为规格。
2 B 模具
3 Part A
4 Part B
|
价格走势对比图
硅橡胶,LSR SQUARE® LIM1520-40A/B
硅橡胶,LSR SQUARE® LIM1520-45A/B
型号 | 类别 | 厂家 | 产地 | 颜色 | 首期使用量 | 后期使用量 | 包装 | 交期 | 成型产品 | 操作 |
---|---|---|---|---|---|---|---|---|---|---|
GP-525N | GPPS | VATAA土耳其地区 | 亚太地区 | 天 |
单据状态:未提交