FEP，3M™ Dyneon™ Fluoroplastic FEP 6303Z对比FEP，Teflon® FEP 9302物性表,价格行情_搜料

牌号信息	3M™ Dyneon™ Fluoroplastic FEP 6303Z 物性表 FEP & 美国3M 指导价格：暂无塑料库存：缺货	Teflon® FEP 9302 物性表 FEP & 美国科慕指导价格：暂无塑料库存：缺货
牌号简介	3M™ Dyneon™ Fluoroplastic FEP 6303Z是一种由四氟乙烯和六氟丙烯组成的全氟化共聚物，属于FEP类产品。它主要用于油管挤压、大尺寸电线和电缆应用以及化学加工工业。特殊特性：优异的耐化学性、高热稳定性、工作温度可达200°C以上、优异的介电性能、宽的加工窗口、极低的可燃性（高LOI）、良好的机械性能、优异的防粘性能、低摩擦系数、极高的耐候性和紫外线稳定性。 3M™ Dyneon™ Fluoroplastic Granules FEP 6301Z, FEP 6303Z and FEP 6307Z are offered for extrusion, injection molding and transfer molding for the wire and cable and chemical process industries. Features and Benefits Excellent electrical properties High thermal stability Long term temperature rating up to 200°C Outstanding chemical resistance Wide processing window	出于库存控制目的，产品名称后面可以跟一个X。标记为FEP 9302和FEP 9302 X的产品是等效的，本文件中的所有信息都适用于这两者。化工行业的典型应用管道、管道、衬里、波纹管、阀门和其他部件。用于要求高应力抗裂性的电线和电缆应用的护套。杜邦特氟隆FEP 9302是一种不含添加剂的四氟乙烯和六氟丙烯的熔融加工共聚物，符合ASTM D 2116第四类的要求。它提供了特氟隆氟聚合物树脂的优良性能组合：无老化特性、化学惰性、优异的介电性能。低可燃性、耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性和优异的耐候性。Teflon FEP 9302用于化学工业，如化学衬里、波纹管、阀门部件、管道和管道。在要求很高的电线和电缆应用中，它需要很高的抗应力开裂能力，可以用作护套材料。由于它的粘度和应力抗裂性的结合，它可以在更快的速度和更高的挤出生产线速度比许多FEP等级具有相当的应力抗裂性能。应力抗裂性是确定最终使用性能的重要因素。经验表明，在树脂薄膜上进行的MIT耐折性或弯曲寿命试验与广泛的电缆试验建立了良好的相关性。MIT的弹性寿命越高，树脂的应力开裂抗力越高。麻省理工学院的测试结果应被视为不同等级树脂比较性能的指南。我们建议，对于涉及重复热循环和弯曲循环的应用，应始终对最终电缆进行特定测试。另请参见杜邦公告“电线和电缆应用的等级选择器”。 For inventory control purposes product name may be followed by an X. Products labeled FEP 9302 and FEP 9302 X are equivalent and all information in this document is applicable to both. Typical Application Tubes, piping, linings, bellows, valves and other components for the chemical industry. Jackets for Wire and Cable applications demanding a high degree of stress crack resistance. DuPont Teflon ® FEP 9302 is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116 type IV. It offers the excellent combination of properties characteristic of Teflon ® fluoropolymer resins: non-ageing characteristics, chemical inertness, exceptional dielectric properties, low flammability, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption and excellent weather resistance. Teflon ® FEP 9302 is used in the chemical industry for applications such as chemical linings, bellows, valve components, pipes and tubing. In demanding Wire and Cable applications, requiring a very high degree of stress crack resistance, it can be used as a material for jacketing. Thanks to its combination of viscosity and stress crack resistance, it can be processed at faster rates and higher extrusion line speeds than many FEP grades with comparable stress crack resistance performance. Stress crack resistance is an important element in establishing end-use performance. Experience shows that the MIT folding endurance or flex life test, performed on a thin film of resin, has established a good correlation with extensive cable testing. The higher the MIT flex life, the higher the stress-crack resistance of the resin. MIT test results should be viewed as a guide to comparative performance of the various grades of resin. We recommend that for applications involving repeated thermal and flex cycling, specific tests on the final cable always should be undertaken. See also DuPont's bulletin "Grade selector for Wire and Cable applications."

产品描述
厂家：	美国3M	美国科慕 Chemours
类别：	FEP FEP	FEP FEP
填料：
用途：	电缆护套,电线电缆应用,管件	电缆护套,管件,衬里,电线电缆应用,管道系统
性能特点：	机械强度好,耐候抗UV,无粘性,低摩擦系数,高分子量,共聚物,耐化学性,热稳定性好,抗应力开裂,防火阻燃等级V-0 Good Rigidity,Weather resistance is good,No viscosity,Low coefficient of friction,High molecular weight,Copolymer,Solvent resistance,Heat Stabilized,High ESCR,V-0	耐候抗UV,韧性好,电气性好,低摩擦系数,成型周期快,食品接触,耐高温,共聚物,耐化学性,低吸湿性,防火阻燃等级V-0 Weather resistance is good,Good flexibility,Good Electrical Properties,Low coefficient of friction,Quick molding cycle,Food contact compliance,High Heat Resistance,Copolymer,Solvent resistance,Low moisture absorption,V-0
加工条件：	电线	挤出 Extrusion

技术参数

物理性能
PHYSICAL 3M™ Dyneon™ Fluoroplastic FEP 6303Z Teflon® FEP 9302 单位
UNIT 测试方法
TEST METHOD

吸水率(24hr)
Water absorption rate % ASTM D570

密度
Density g/cm³ ISO 12086

密度(--)
Density g/cm³ ASTM D792

密度(--)
Density g/cm³ ISO 1183

熔体质量流动速率(372℃，5.0kg)
Melt Flow Rate g/10min ASTM D2116

熔体质量流动速率(372℃，5.0kg)
Melt Flow Rate g/10min ISO 1133

熔体质量流动速率(372℃，5.0kg)
Melt Flow Rate g/10min ISO 12086

机械性能
MECHANICAL 3M™ Dyneon™ Fluoroplastic FEP 6303Z Teflon® FEP 9302 单位
UNIT 测试方法
TEST METHOD

拉伸应变(断裂，23℃)
Tensile strain % ASTM D638

拉伸应变(断裂，23℃)
Tensile strain % ISO 12086

拉伸应变(断裂，23℃)
Tensile strain % ISO 527-2

拉伸强度(屈服，23℃)
tensile strength MPa ASTM D638

拉伸强度(屈服，23℃)
tensile strength MPa ISO 12086

拉伸强度(断裂，23℃)
tensile strength MPa ISO 527-2

拉伸模量
Tensile modulus MPa ISO 527-2

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

邵氏硬度(邵氏 D)
Shore hardness ISO 868

热性能
THERMAL 3M™ Dyneon™ Fluoroplastic FEP 6303Z Teflon® FEP 9302 单位
UNIT 测试方法
TEST METHOD

熔融温度
Melting temperature ℃

熔融温度
Melting temperature ℃ ISO 12086

连续使用温度
Continuous use temperature ℃

电气性能
ELECTRICAL 3M™ Dyneon™ Fluoroplastic FEP 6303Z Teflon® FEP 9302 单位
UNIT 测试方法
TEST METHOD

介电常数(1 kHz)
Dielectric constant ASTM D150

介电常数(1.00 GHz)
Dielectric constant ASTM D150

介电常数(23 ℃，1 MHz)
Dielectric constant ASTM D150

介电常数(23 ℃，9.40 GHz)
Dielectric constant ASTM D150

介电强度(0.25 mm)
Dielectric strength kV/mm ASTM D149

介电强度(0.25 mm)
Dielectric strength kV/mm IEC 60243-1

相对电容率(1 kHz)
Relative permittivity IEC 60250

相对电容率(1.00 GHz)
Relative permittivity IEC 60250

耗散因数(1 GHz)
Dissipation factor ASTM D150

耗散因数(1 GHz)
Dissipation factor IEC 60250

耗散因数(1 kHz)
Dissipation factor ASTM D150

耗散因数(1 kHz)
Dissipation factor IEC 60250

耗散因数(1 MHz)
Dissipation factor ASTM D150

耗散因数(9.4 GHz)
Dissipation factor ASTM D150

阻燃性能
FLAMMABILITY 3M™ Dyneon™ Fluoroplastic FEP 6303Z Teflon® FEP 9302 单位
UNIT 测试方法
TEST METHOD

极限氧指数
Extreme oxygen index % ASTM D2863

极限氧指数
Extreme oxygen index % ISO 4589-2

阻燃等级
Flame retardant level UL 94

补充信息
3M™ Dyneon™ Fluoroplastic FEP 6303Z Teflon® FEP 9302 单位
UNIT 测试方法
TEST METHOD

Critical Shear Rate(372℃)
Critical Shear Rate（372℃） sec^-1 Internal Method

Guide DDR Range(for cable extrusion)
Guide DDR Range

Guide DDR Range(for jacket extrusion)
Guide DDR Range

MIT耐折强度(double folds，200.0 µm)
MIT flexural strength (double folds, 200.0 µ m) ASTM D2176

MIT耐折强度(film，200.0 µm)
MIT flexural strength (film, 200.0 µ m) Cycles ASTM D2176

冲击性能
IMPACT 3M™ Dyneon™ Fluoroplastic FEP 6303Z Teflon® FEP 9302 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch ISO 180

加工方式

挤出 3M™ Dyneon™ Fluoroplastic FEP 6303Z Teflon® FEP 9302 单位测试方法

口模温度 °C

料筒1区温度 °C

料筒2区温度 °C

料筒3区温度 °C

料筒4区温度 °C

备注

1 一般属性：这些不能被视为规格。

2 The continuous service temperature is based on accelerated heat-aging tests, and represents the temperature at which tensile strength and ultimate elongation retains 50% of the original values, after 20 000 h thermal aging When considering the use of Teflon ® FEP at elevated temperatures especially in combination with mechanical, electrical or chemical exposure, preliminary testing should be done to verify suitability.

3 ASTM D4591 / D3418

4 方法A（短时间）

5 - These results are based on laboratory tests, under controlled conditions, and do not reflect performance under actual fire conditions. - Current rating is a typical theoretical value


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
热性能
电气性能
阻燃性能
补充信息
冲击性能
加工方式
挤出
备注
返回顶部

FEP，3M™ Dyneon™ Fluoroplastic FEP 6303Z对比FEP，Teflon® FEP 9302对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别