FEP，NEOFLON® NP-2030对比FEP，Teflon® FEP 100物性表,价格行情_搜料

牌号信息	NEOFLON® NP-2030 物性表 FEP & 日本大金氟化工指导价格：暂无塑料库存：缺货	Teflon® FEP 100 物性表 FEP & 美国科慕指导价格：暂无塑料库存：缺货
牌号简介	NEOFLON® FEP NP-2030是为诸如耐热电缆绝缘等粗线尺寸而开发的。它也可用于管子和注射成型。 Neoflon® FEP NP-2030 was developed for thick wire sizes such as heat resistance cable insulation. It may also be used for tubing and injection molding.	出于库存控制目的，产品名称后面可以跟一个X。标记为FEP 100和FEP 100 X的产品是等效的，本文件中的所有信息都适用于这两者。典型应用电线电缆绝缘，小管道和注塑件。杜邦特氟隆FEP 100是一种不含添加剂的四氟乙烯和六氟丙烯熔融加工共聚物，符合ASTM D 2116 I型的要求。它提供了特氟隆氟聚合物树脂的优良性能组合：无老化特性、化学惰性、优异的介电性能。耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性、低可燃性、在极端温度下的性能和优异的耐候性。特氟隆FEP 100是一种通用级材料，在许多不同的应用中使用。它可以熔化挤压，用于电线涂层作为一次绝缘，在某些情况下，用于电缆护套。使用特氟隆FEP 100绝缘的电缆已满足保险商实验室UL910 Steiner隧道测试的要求，安装在无金属导管的静压箱中。应力抗裂性是确定最终使用性能的重要因素。为了确定性能评估，需要对电线和电缆结构进行广泛的测试。经验表明，在树脂薄膜上进行的MIT耐折性或弯曲寿命试验与广泛的电缆试验建立了良好的相关性。MIT的弹性寿命越高，树脂的应力开裂抗力越高。麻省理工学院的测试结果应被视为不同等级树脂比较性能的指南。我们建议，对于涉及重复热循环和弯曲循环的应用，应始终对最终电缆进行特定测试。另请参见杜邦公告“电线和电缆应用的等级选择器”。 For inventory control purposes product name may be followed by an X. Products labeled FEP 100 and FEP 100 X are equivalent and all information in this document is applicable to both. Typical Application Wire and cable insulation, small tubing and injection molded parts. DuPont Teflon ® FEP 100 is a melt-processible copolymer of tetrafluoroethylene and hexafluoropropylene without additives that meets the requirements of ASTM D 2116 type I. It offers the excellent combination of properties characteristic of Teflon ® fluoropolymer resins: non-ageing characteristics, chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes and excellent weather resistance. Teflon ® FEP 100 is a general purpose grade and is used in many different applications. It can be melt-extruded and is used for wire coating as primary insulation and, in certain cases, for cable jacketing. Cables insulated with Teflon ® FEP 100 have met the requirements of Underwriters's Laboratory UL910 Steiner Tunnel tests for installation in plenums without metal conduits. Stress-crack resistance is an important element in establishing end-use performance. Extensive testing of wire and cable constructions is needed for definitive performance evaluation. Experience shows that the MIT folding endurance or flex life test, performed on a thin film of resin, has established a good correlation with extensive cable testing. The higher the MIT flex life, the higher the stress-crack resistance of the resin. MIT test results should be viewed as a guide to comparative performance of the various grades of resin. We recommend that for applications involving repeated thermal and flex cycling, specific tests on the final cable always should be undertaken. See also DuPont's bulletin "Grade selector for Wire and Cable applications".

产品描述
厂家：	日本大金氟化工 Daikin Fluorochemicals	美国科慕 Chemours
类别：	FEP FEP	FEP
填料：
用途：	电线电缆应用,电线护套,管件	绝缘材料,电缆护套,电线电缆应用
性能特点：	耐热性好 Heat Resistance, Good	防火阻燃等级V-0,耐候抗UV,共聚物,低摩擦系数,耐高温,低吸湿性,韧性好,耐化学性,食品接触 V-0,Weather resistance is good,Copolymer,Low coefficient of friction,High Heat Resistance,Low moisture absorption,Good flexibility,Solvent resistance,Food contact compliance
加工条件：	挤出 Extrusion	压缩模塑,注射成型,挤出,吹塑成型 Injection Molding,Extrusion

技术参数

物理性能
PHYSICAL NEOFLON® NP-2030 Teflon® FEP 100 单位
UNIT 测试方法
TEST METHOD

吸水率(24hr)
Water absorption rate % ASTM D570

密度(--)
Density g/cm³ ASTM D792

密度(--)
Density g/cm³ ISO 1183

熔体质量流动速率(372℃，2.16kg)
Melt Flow Rate g/10min ASTM D2116

熔体质量流动速率(372℃，5.0kg)
Melt Flow Rate g/10min ASTM D2116

熔体质量流动速率(372℃，5.0kg)
Melt Flow Rate g/10min ISO 12086

机械性能
MECHANICAL NEOFLON® NP-2030 Teflon® FEP 100 单位
UNIT 测试方法
TEST METHOD

拉伸应变(断裂)
Tensile strain % ASTM D2116

拉伸应变(断裂，23℃)
Tensile strain % ASTM D638

拉伸应变(断裂，23℃)
Tensile strain % ISO 12086

拉伸强度
tensile strength MPa ASTM D2116

拉伸强度(屈服，23℃)
tensile strength MPa ASTM D638

拉伸强度(屈服，23℃)
tensile strength MPa ISO 12086

邵氏硬度(邵氏 D)
Shore hardness ASTM D2240

邵氏硬度(邵氏 D)
Shore hardness ISO 868

热性能
THERMAL NEOFLON® NP-2030 Teflon® FEP 100 单位
UNIT 测试方法
TEST METHOD

熔融温度
Melting temperature ℃ ASTM D2116

熔融温度
Melting temperature ℃ ASTM D3418

连续使用温度
Continuous use temperature ℃

补充信息
NEOFLON® NP-2030 Teflon® FEP 100 单位
UNIT 测试方法
TEST METHOD

Critical Shear Rate(372℃)
Critical Shear Rate（372℃） sec^-1 Internal Method

Guide DDR Range(for cable extrusion)
Guide DDR Range（for cable extrusion）

MIT耐折强度(film，200.0 µm)
MIT flexural strength (film, 200.0 µ m) Cycles ASTM D2176

MIT耐折强度(周期)
MIT flexural strength (cycle) ASTM D2176

冲击性能
IMPACT NEOFLON® NP-2030 Teflon® FEP 100 单位
UNIT 测试方法
TEST METHOD

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch ASTM D256

悬臂梁缺口冲击强度(23℃)
Impact strength of cantilever beam notch ISO 180

电气性能
ELECTRICAL NEOFLON® NP-2030 Teflon® FEP 100 单位
UNIT 测试方法
TEST METHOD

介电常数(1 kHz)
Dielectric constant ASTM D150

介电常数(1.00 GHz)
Dielectric constant ASTM D150

介电强度(0.25 mm)
Dielectric strength kV/mm ASTM D149

介电强度(0.25 mm)
Dielectric strength kV/mm IEC 60243-1

相对电容率(1 kHz)
Relative permittivity IEC 60250

相对电容率(1.00 GHz)
Relative permittivity IEC 60250

耗散因数(1 GHz)
Dissipation factor ASTM D150

耗散因数(1 GHz)
Dissipation factor IEC 60250

耗散因数(1 kHz)
Dissipation factor ASTM D150

耗散因数(1 kHz)
Dissipation factor IEC 60250

阻燃性能
FLAMMABILITY NEOFLON® NP-2030 Teflon® FEP 100 单位
UNIT 测试方法
TEST METHOD

极限氧指数
Extreme oxygen index % ASTM D2863

极限氧指数
Extreme oxygen index % ISO 4589-2

阻燃等级
Flame retardant level UL 94

备注

2. DSC

1 一般属性：这些不能被视为规格。

2 The continuous service temperature is based on accelerated heat-aging tests, and represents the temperature at which tensile strength and ultimate elongation retains 50% of the original values, after 20 000 h thermal aging When considering the use of Teflon ® FEP at elevated temperatures especially in combination with mechanical, electrical or chemical exposure, preliminary testing should be done to verify suitability.

3 ASTM D4591 / D3418

4 方法A（短时间）

5 - These results are based on laboratory tests, under controlled conditions, and do not reflect performance under actual fire conditions. - Current rating is a typical theoretical value


相关资讯

牌号简介
产品描述
技术参数
物理性能
机械性能
热性能
补充信息
冲击性能
电气性能
阻燃性能
加工方式
备注
返回顶部

FEP，NEOFLON® NP-2030对比FEP，Teflon® FEP 100对比物性表,价格行情_搜料_soliao

询价回复情况说明

牌号	厂家
类别