公司信息及水印
牌号简介 About |
---|
EX级是我们热塑性塑料注射成型机和挤出机用最强的清洗清洗剂。Ex级是玻璃填充的,可提供出色的碳和/或彩色沉积物擦洗,同时特别设计用于减少清洗后的化合物残留物。防爆等级适用于清洗各种商品、工程和超级工程树脂。特别推荐使用Ex,以帮助防止机器大修,或在强制要求时方便螺丝拔出。高去污性苯乙烯基玻璃填充树脂:大多数商品和工程树脂在加工温度范围内。用ASACLEAN™ EX等级进行吹扫的提示:Ex级适用于需要最大限度去除沉积物的难以吹扫树脂。通常不建议对热流道进行清洁和密封,因为其用于挤压的玻璃含量。当吹扫Ex级时,应移除筛包(网),在任何温度下,不得使其在机器中闲置更长时间。n 30分钟应用:变色材料改变高温树脂碳/颜色污染处理温度:390至680°F(200至360°C)使用时的提示:AsaClean不通过化学反应工作。有效清洗不需要任何浸泡时间或停留时间,为了获得最大的性能,ASACLEAN不应与其他材料一起稀释。ASACLEAN在最大搅拌下效果最好。使用最大安全螺杆速度和注塑成型也使用最大安全背压与螺杆在最前方的位置。 EX Grade is our strongest-cleaning purging compound for thermoplastic injection molding and extrusion machines. EX Grade is glass-filled to provide excellent scrubbing of carbon and / or color deposits while especially designed to leave less purging compound residue behind. EX Grade is suitable for purging a wide range of commodity, engineering, and super-engineering resins. EX is especially recommended for helping prevent machine overhauls or for facilitating screw-pulls if they are mandatory. High Detergency Styrenic-Based Glass-filled Resins Purged: Most commodity and engineering resins within the processing temperature range. Tips for purging with ASACLEAN EX Grade: EX Grade is ideal for hard to purge resins requiring maximum deposit removal Generally NOT recommended for hot runner cleaning and sealing due to its glass content For Extrusion, screen packs (mesh) should be removed when purging EX Grade should not be left idle in a machine, at any temperature, for longer than 30 minutes Applications: Color Changes Material Changes High Temperature Resins Carbon/Color Contamination Processing temperature: 390 to 680°F (200 to 360°C) Tips when using ASACLEAN: ASACLEAN does not work by chemical reaction. No soak time or hold-up time is required for an effective purge For maximum performance, ASACLEAN should not be diluted with other materials. ASACLEAN works best with maximum agitation. Use the maximum safe screw speed and for injection molding also use maximum safe back pressure with the screw in the most forward position. |
技术参数 Technical Data | |||
---|---|---|---|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
加工温度 Processing temperature |
199 到 360 | ℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
生物降解塑料产业发展,世界看中国,中国看海南
2021-06-25 搜料网资讯: 塑料产品给人们生活带来了极大的便利,但大量塑料制品使用废弃后,由于不当处置而带来的环境问题,成为了当前全球关注的热点。尤其是应用广泛、难以回收利用、不 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |