![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/icon-datasheet-right-ad-none.png)
![](/page/pc/images/result/downloads-img2.png)
公司信息及水印
![](/page/pc/images/result/downloads-img4.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img1.png)
![](/page/pc/images/result/downloads-tag3.png)
![](/page/pc/images/result/downloads-img3.png)
牌号简介 About |
---|
TC-890 FR Rev 1采用了一种非汞基催化剂系统,能够在5分钟的工作时间内生产出一种硬度为80邵尔D的材料。该系统可用于手动浇注或机铸电子外壳以及所有需要阻燃特性的零件。产品亮点:无汞脱模时间:1-2小时在环境温度下在硅橡胶模具(1/8“厚截面)符合RoHS标准的UL 94V-0中列出,1/16”厚度下的可燃性等级(文件E174527) This tough 80 Shore D Flame Retardant material is UL Listed with a flammability rating at 1/16 inch (1.6 mm). It's great for hand casting or machine dispensing electronic enclosures, or any parts requiring flame retardant characteristics. The 5 to 6 minute work time exhibits very low shrinkage and exceptional physical properties. Also available in a variety of work times as TC-891, 892, and 894 FR REV 1. RoHS compliant REACH compliant 5-6 minute work time 1-2 hour demold time UL 94V-0 Listed, flammability rating at 1/16" thickness (File# E174527) |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
-- -- 2 |
1.18 | g/cm³ | |
-- -- |
1.30 | g/cm³ | ASTM D792 |
-- -- 3 |
1.33 | g/cm³ | |
特定体积 Specific volume |
0.791 | cm³/g | |
收缩率 Shrinkage rate 4 |
|||
1.27 cm 1.27 cm 4 |
0.060 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
ASTM D150 | ||
耗散因数 Dissipation factor |
|||
1 MHz 1 MHz |
ASTM D150 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
1.60 mm 1.60 mm |
UL 94 | ||
热固性混合粘度 Thermosetting mixed viscosity |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
25℃ 25℃ 2 |
cP | ||
25℃ 25℃ 3 |
cP | ||
25℃ 25℃ |
cP | ||
脱模时间 stripping time |
|||
25℃ 25℃ |
min | ||
后固化时间 Post curing time |
|||
25℃ 25℃ |
hr | ||
胶凝时间 Gelation time |
min | ||
工作时间 working hours 5 |
|||
25℃ 25℃ 5 |
min | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸模量 Tensile modulus |
MPa | ASTM D638 | |
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ASTM D638 | |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
ASTM D648 | ||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
球压测试 Ball pressure test |
|||
75℃,1.3 mm 75℃,1.3 mm |
IEC 60695-10-2 | ||
热固组件 Thermosetting components |
|||
部件 A Component A |
|||
部件 B Component B |
|||
贮藏期限 Storage period |
wk |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Part A |
3 Part B |
4 12x0.5x0.5 in |
5 100g mass |
【新闻资讯】查看全部 ![]()
布拉斯科价值7.5亿美元的聚丙烯工厂在德克萨斯州投产
2020-10-11 搜料网资讯: 石油化工公司布拉斯科近日宣布,其位于德克萨斯州拉波特的新的世界级聚丙烯(PP)生产线成功启动商业生产。在新闻发布会上,布拉斯科美国分公司首席执行官Mark Ni |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |