物性表自定义
公司信息及水印
公司信息及水印
下载中文物性表
下载英文物性表
邮件发送/他人
| 牌号简介 About |
|---|
| 出于库存控制目的，产品名称后面可以跟一个X。标记为PFA 440HPA和PFA 440HPA X的产品是等效的，本文件中的所有信息都适用于这两者。杜邦特氟龙PFA 440HPA的典型应用包括用于半导体、制药和生物技术等关键高纯度工艺的流体处理组件，以及需要十亿分之一纯度范围的应用。与特氟隆PFA 440HPB相比，特氟隆PFA 440HPA的熔体流动速率稍高，加工更容易。说明杜邦特氟隆PFA 440HPA是一种特殊用途的氟塑料树脂，可提供颗粒形式。该树脂是特氟隆PFA 340的化学改性形式，它结合了母树脂的许多优点（相对较高的典型熔融流动速率为16），以及其他一些优点，包括提高纯度、提高加工时的热稳定性，以及化学惰性，例如对臭氧化液体的惰性。表1显示了特氟隆PFA 440hpa的典型性能数据。特氟隆PFA440HPA是一种高级树脂，具有最低水平的可提取性，旨在满足超高纯度要求。Teflon PFA 440HPA具有相对较高的注塑和挤出过程的熔体流动速率（典型的MFR为16），并且由于端组聚合物结构稳定，其惰性水平最高。特氟隆PFA440HPA纯度的提高使其适用于需要改进颜色、降低可提取氟化物以及不受其他异物影响的应用。本产品不含添加剂，适用于需要十亿分之一纯度的恶劣化学环境。例如半导体制造、工业或生命科学流体处理系统以及流体系统精确测量仪器。与其他热塑性塑料相比，特氟隆PFA 440HPA的高熔融强度和热稳定性可用于提高加工速度，结合传统热塑性塑料的易加工性，其许多特性与聚四氟乙烯相似。由纯聚四氟乙烯PFA 440HPA树脂制成的经过适当加工的产品具有氟塑料树脂的优良特性：化学惰性、优异的介电性能、耐热性、韧性和柔韧性、低摩擦系数、不粘特性、可忽略的吸湿性、低可燃性、性能。在极端温度下运行，具有良好的耐候性。在火焰情况下，特氟隆PFA440HPA的产品不会着火，也不会促进火焰蔓延。当被其他来源的火焰点燃时，它们的热量贡献很小，并且以很低的烟以缓慢的速度添加。特氟隆PFA 440HPA符合ASTM D3307，I型的要求 For inventory control purposes product name may be followed by an X. Products labeled PFA 440HPA and PFA 440HPA X are equivalent and all information in this document is applicable to both. Typical Application Applications for DuPont™ Teflon ® PFA 440HPA include fluid handling components for critical, high-purity processes like semiconductor, pharmaceutical, and biotechnology, as well as applications where purity in the parts-per-billion range is needed. Teflon ® PFA 440HPA offers a slightly higher melt flow rate than Teflon ® PFA 440HPB, providing greater processing ease. Description DuPont™ Teflon ® PFA 440HPA is a special purpose fluoroplastic resin available in pellet form. This resin is a chemically modified form of Teflon ® PFA 340 that combines many of the benefits of the parent resin (a relatively high typical melt flow rate of 16) with several additional benefits including enhanced purity, improved thermal stability while processing, and chemical inertness, for example, to ozonated fluids. Table 1 shows the typical property data for Teflon ® PFA 440HPA. Teflon ® PFA 440HPA is a premium resin with the lowest level of extractables designed to meet ultra-high purity requirements. Teflon ® PFA 440HPA has a relatively high melt flow rate (typical MFR of 16) for injection molding and extrusion processes, and the highest level of inertness due to stable end group polymer structure. The enhanced purity of Teflon ® PFA 440HPA makes it suitable for applications that require improved color, lower extractable fluorides, and freedom from other foreign materials. This product contains no additives and is designed for hostile chemical environments where purity in the parts-per-billion range is needed. Examples are in semiconductor manufacture, fluid handling systems for industry or life sciences, and instrumentation for precise measurements of fluid systems. Compared to other thermoplastics, the high melt strength and thermal stability of Teflon ® PFA 440HPA can be used to improve processing rates, combining the processing ease of conventional thermoplastics with many properties similar to those of polytetrafluoroethylene. Properly processed products made from neat Teflon ® PFA 440HPA resin provide the superior properties characteristic of fluoroplastic resins: chemical inertness, exceptional dielectric properties, heat resistance, toughness and flexibility, low coefficient of friction, non-stick characteristics, negligible moisture absorption, low flammability, performance at temperature extremes, and excellent weather resistance. In a flame situation, products of Teflon ® PFA 440HPA resist ignition and do not promote flame spread. When ignited by flame from other sources, their contribution of heat is very small and added at a slow rate with very little smoke. Teflon ® PFA 440HPA meets the requirements of ASTM D3307, Type I |
产品描述 Product Description
用途：液体处理;
加工条件：注射成型 Injection Molding
性能特点： 耐热性好; 防火阻燃等级V-0; 低吸湿性; 耐化学性; 高纯度; 流动性高; 电气性好; 食品接触; 耐候抗UV; 熔体强度好; 热稳定性好; 低烟; 低摩擦系数; 韧性好; Weather resistance is good,Good flexibility,High purity,Low smoke,High liquidity,Good Electrical Properties,Low coefficient of friction,Food contact compliance,Good melt strength,Heat Resistance, Good,Solvent resistance,Low moisture absorption,Heat Stabilized,V-0
| 技术参数 Technical Data | |||
|---|---|---|---|
|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
密度 Density |
2.15 | g/cm³ | ASTM D792 |
|
熔体质量流动速率 Melt Flow Rate |
|||
|
372℃，5.0kg 372℃，5.0kg |
16 | g/10min | ASTM D3307 |
|
372℃，5.0kg 372℃，5.0kg |
16 | g/10min | ISO 12086 |
|
吸水率 Water absorption rate |
|||
|
24hr 24hr |
< 0.030 | % | ASTM D570 |
|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
邵氏硬度 Shore hardness |
|||
|
邵氏 D Shaw's D |
55 | ISO 868 | |
|
邵氏 D Shaw's D |
ASTM D2240 | ||
|
拉伸强度 tensile strength |
ASTM D3307 | ||
|
23℃ 23℃ |
MPa | ASTM D3307 | |
|
250℃ 250℃ |
MPa | ASTM D3307 | |
|
拉伸强度 tensile strength |
ISO 12086 | ||
|
23℃ 23℃ |
MPa | ISO 12086 | |
|
250℃ 250℃ |
MPa | ISO 12086 | |
|
拉伸应变 Tensile strain |
ASTM D3307 | ||
|
断裂，23℃ Fracture, 23 ℃ |
% | ASTM D3307 | |
|
断裂，250℃ Fracture, 250 ℃ |
% | ASTM D3307 | |
|
拉伸应变 Tensile strain |
ISO 12086 | ||
|
断裂，23℃ Fracture, 23 ℃ |
% | ISO 12086 | |
|
断裂，250℃ Fracture, 250 ℃ |
% | ISO 12086 | |
|
弯曲模量 Bending modulus |
ASTM D790 | ||
|
23℃ 23℃ |
MPa | ASTM D790 | |
|
250℃ 250℃ |
MPa | ASTM D790 | |
|
弯曲模量 Bending modulus |
ISO 178 | ||
|
23℃ 23℃ |
MPa | ISO 178 | |
|
250℃ 250℃ |
MPa | ISO 178 | |
|
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
熔融温度 Melting temperature |
℃ | ASTM D4591 | |
|
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
|
体积电阻率 Volume resistivity |
ohms·cm | ISO 1325 | |
|
介电强度 Dielectric strength |
|||
|
0.25 mm 0.25 mm 2 |
kV/mm | ASTM D149 | |
|
0.25 mm 0.25 mm |
kV/mm | IEC 60243-1 | |
|
介电常数 Dielectric constant |
|||
|
1 MHz 1 MHz |
IEC 60250 | ||
|
1 MHz 1 MHz |
ASTM D150 | ||
|
耗散因数 Dissipation factor |
|||
|
1 MHz 1 MHz |
IEC 60250 | ||
|
1 MHz 1 MHz |
ASTM D150 | ||
|
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
阻燃等级 Flame retardant level 3 |
UL 94 | ||
|
极限氧指数 Extreme oxygen index |
% | ASTM D2863 | |
|
极限氧指数 Extreme oxygen index |
% | ISO 4589-2 | |
|
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
|
Critical Shear Rate（372℃） Critical Shear Rate（372℃） |
sec^-1 | ||
|
MIT耐折强度（200.0 µm） MIT flexural strength (200.0 µ m) 4 |
Cycles | ASTM D2176 | |
| 备注 |
|---|
| 1 一般属性：这些不能被视为规格。 |
| 2 方法A（短时间） |
| 3 These results are based on laboratory tests under controlled conditions and do not reflect performance under actual fire conditions, current rating is a typical theoretical value. |
| 4 Depending on fabrication conditions |
|
【新闻资讯】查看全部 
阿国油出售第三船蓝氨产品
2021-09-04 搜料网资讯： 近日，阿布扎比国家石油公司(ADNOC)宣布，该公司已向一日本公司出售了第三船蓝氨产品。据悉，ADNOC与Fertiglobe合作，将此船蓝氨货物出售给Inpex公司用于发电。ADNOC表示， |
|
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任，并强烈建议在最终选择材料前，就数据值与材料供应商进行验证。 |
当前牌号已加入对比
支付宝
微信支付