公司信息及水印
牌号简介 About |
---|
Bormed™ HE9621PH3-01是一种用于医疗应用评估的树脂。HE9621PH3-01是一种具有窄分子量分布的高密度聚乙烯,通常用于要求中等流动性和高刚性物品的注塑成型。该等级适用于需要高刚度和低翘曲的物品。材料可以用环氧乙烷、蒸汽和高达35kgy的辐射灭菌;由于辐射灭菌,可能会出现一些轻微的黄变。CAS-NO:9002-88-4应用Bormed™ HE9621PH3-01根据不同的法规和规范进行了评价。以下介绍了医疗器械或药物和诊断包装的典型应用。但是,应咨询Borealis以获得最终批准,以评估Bormed™ HE9621PH3-01的使用。用于粉末、药片和药片瓶盖包装的注射器柱塞和瓶盖,本等级仅可用于产品数据表中列出的应用,且仅限于应用在符合该等级医疗使用规定声明中规定的试验范围内。如果产品数据表中未列出申请,则只有在获得医疗保健部门Borealis营销经理的明确书面同意后,才能使用该等级。Borealis禁止在植入装置中使用任何医疗级产品,植入装置通过外科手术引入人体,并在外科手术后保持原位。特殊特点高硬度低可提取性 Bormed HE9621PH3-01 is a resin intended for evaluation for use in Healthcare applications. HE9621PH3-01 is a high density polyethylene with narrow molecular weight distribution typically used in injection moulding of articles requiring medium flow with high rigidity. This grade is designed for articles which require high stiffness and low warpage. Material can be sterilised with ethylene oxide, steam and radiation up to 35 kGy; as a result of sterilisation by radiation some minor yellowing can occur. CAS-No.: 9002-88-4 Applications Bormed HE9621PH3-01 has been evaluated according to different regulations and norms. Typical applications are mentioned below for Medical devices or Pharmaceutical & Diagnostic packaging. However, Borealis should be consulted for final approval to evaluate the use of Bormed HE9621PH3-01 . Plungers for syringes Packaging for powder, tablets & pills Caps and closures This grade may only be used for the applications listed in the Product Datasheet and only to the extent that the application is within the scope of the tests set out in the Statement on Compliance to Regulations on Medical Use for that grade. If an application is not listed in the Product Datasheet, the grade can be used for such application only after express written consent of the Borealis Marketing Manager, Healthcare. Borealis prohibits the use of any healthcare grade product in an implantable device that is introduced into the human body by surgical intervention and that is intended to remain in place following surgical procedure. Special Features High rigidity Low extractables |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.964 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
12 | g/10min | ISO 1133 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
4.0 | kJ/m² | ISO 179-1eA |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
79.0 | ℃ | ISO 75-2/B |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
62 | ISO 868 | |
拉伸模量 Tensile modulus |
|||
注塑成型 injection molding |
MPa | ISO 527-1-2 | |
拉伸强度 tensile strength |
|||
屈服,注塑成型 Yield, injection molding |
MPa | ISO 527-2/50 | |
拉伸应变 Tensile strain |
|||
屈服,注塑成型 Yield, injection molding |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus |
MPa | ISO 178 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
2018年全球塑料包装袋市场总值将达373亿美元
2016-08-18 克利夫兰行业市场研究企业的报告称,全球对塑料包装袋的需求将以每年6.2%的速度增长,至2018年市场需求总值将达373亿美元。这个数值的增长是由消费者和生产者的传统消费偏好而引发的,市场更偏向于传统的塑料包装形式,这可以说是一种市场消费惯性。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |