公司信息及水印
牌号简介 About |
---|
Moplen EP310D Moplen EP310D是一种低流动性异相共聚物,专为挤出应用而设计,在挤出应用中,平滑的加工性能和高机械性能至关重要。主要应用是用于重型应用的薄膜挤压、胶带、层压薄膜和用于清洁剂等的挤压吹塑容器。Moplen EP310D适用于食品接触。有关法规信息,请参阅Moplen EP310D产品管理公告(PSB)。MOPLEN EP310D高熔融强度聚丙烯抗冲击共聚物树脂的特点:具有良好的延展性和吹塑加工性能非常好的耐冷冲击性非常高的抗冲击强度和良好的刚度应用:重型袋用吹塑薄膜管(无压)型波纹管吹塑瓶热成型片 Moplen EP310D Moplen EP310D is a low fluidity polypropylene heterophasic copolymer. It does not contain anti-blocking and slip additives. Moplen EP310D is typically used by customers for extrusion applications when high mechanical properties are of the utmost importance. It is normally extruded by customers in single layer film for lamination on other substrates, obtaining structures that can be processed under high retorting conditions. This grade has been reported to be used in some other typical applications, such as extruded film for adhesive tapes, lamination film, freezer film, pipes, fittings and containers produced by extrusion blow molding. Customers also reported that can be used as a building block for heavy duty bags, delivering high impact and thermal resistance over a broad range of temperatures. Moplen EP310D has been reported by customers to exhibit high impact, good puncture, good tear resistance, high seal strength and seal integrity. Moplen EP310D High Melt Strength Polypropylene Impact Copolymer Resin Features: Excellent processability for extension and blow molding Very good cold impact resistance Very high impact strength and good stiffness Applications: Blown film for Heavy Duty Bag Pipe (non Pressure) and Profile Corrugated pipe Blow Molding Bottle Thermoforming Sheet |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ISO 1183 |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
0.95 | g/10min | ISO 1133 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
26.0 | MPa | ISO 527-2/50 |
断裂 fracture |
30.0 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
ISO 527-2/50 | ||
屈服 yield |
13 | % | ISO 527-2/50 |
断裂 fracture |
% | ISO 527-2/50 | |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
薄膜 film |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength 2 |
ASTM D882 | ||
MD,断裂,50 µm,吹塑薄膜 MD, fracture, 50 µ m, blow molded film |
MPa | ASTM D882 | |
TD,断裂,50 µm,吹塑薄膜 TD, fracture, 50 µ m, blow molded film |
MPa | ASTM D882 | |
拉伸应变 Tensile strain 2 |
ASTM D882 | ||
MD,断裂,50 µm,挤塑薄膜 MD, fracture, 50 µ m, extruded film |
% | ASTM D882 | |
TD,断裂,50 µm,挤塑薄膜 TD, fracture, 50 µ m, extruded film |
% | ASTM D882 | |
落锤冲击 Drop hammer impact |
|||
铸造薄膜 Casting thin film |
g | ASTM D1709 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179/1eA | ||
-20℃ -20℃ |
kJ/m² | ISO 179/1eA | |
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
维卡软化温度 Vicat Softening Temp |
|||
A50 A50 |
℃ | ISO 306/A50 | |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
光泽度 gloss |
|||
50 µm,铸造薄膜 50 µ m, cast thin film |
ASTM D2457 | ||
雾度 Haze |
|||
50 µm,铸造薄膜 50 µ m, cast thin film |
% | ASTM D1003 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 20 in/min |
【新闻资讯】查看全部
中国塑料城云沙龙之聚丙烯供需分析及展望
2021-03-19 搜料网资讯: 1、国内外供需现状 (1)全球供需现状 东北亚依然是全球PP产能最大的地区,约4000万吨,占全球的47%,其中中国PP产能约2840万吨,占东北亚的近71%,占全球产能的32%,可以 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |