牌号简介 About |
---|
LE130A是酸酐接枝聚乙烯。它是有用的颗粒形式,使用传统的挤出和共挤设备设计处理聚乙烯树脂。这种材料通常用于多层阻挡膜、管和片材的生产。LE130A是为乙烯-乙烯醇(EVOH)或聚酰胺(尼龙)基阻隔膜开发的。LE130A适用于多层吹膜。基于LLDPE,该胶粘剂用于聚乙烯与阻隔材料之间的粘结层。 LE130A is anhydride grafted polyethylene. It is useful in pellet form for use conventional extrusion and co-extrusion equipment designed to process polyethylene resins. Usually this materials is used in multi-layered barrier film, tube and sheet production. LE130A is developed for ethylene vinyl alcohol (EVOH) or polyamide (Nylon) based barrier film. LE130A is suitable for multi-layer blown film. Based on LLDPE, this adhesive is used for the tie layer between PE and barrier materials. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.903 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,2.16kg 190℃,2.16kg |
5.1 | g/10min | ASTM D1238 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
脆化温度 Embrittlement temperature |
< -70.0 | ℃ | ASTM D746 |
维卡软化温度 Vicat Softening Temp |
76.0 | ℃ | ASTM D1525 |
熔融峰值温度 Melting peak temperature |
120 | ℃ | ASTM D3418 |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘附强度 Adhesive strength |
kN/m | 内部方法 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ASTM D2240 | ||
拉伸强度 tensile strength |
|||
断裂 fracture |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
2021年1-8月越南对美国的橡胶出口量增长92.3%
2021-10-31 搜料网资讯: 尽管新冠肺炎疫情对越南经济造成了巨大的影响,但越南工贸部进出口局表示,2021年前8个月,越南对美国的橡胶出口量增长了92.3%,出口额同比增长了144.6%;平均出口价格 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |