牌号简介 About |
---|
利安德巴塞尔澳大利亚的HP744T是一种高熔体流动,反应堆外有核均聚物。HP744T具有很高的硬度、很低的感官性能和改进的抗虎纹性能。HP744T是为汽车、化合和薄壁注塑应用而设计的,在这些应用中,要求快速的循环时间、一致的性能和平衡的机械性能水平。 LyondellBasell Australia's HP744T is a high melt flow, ex-reactor nucleated homopolymer. HP744T has high stiffness, very low organoleptic properties and improved anti-tiger stripe performance. HP744T has been formulated for use in automotive, compounding and thin wall injection moulding applications, where rapid cycle times are required together with consistent performance and a balanced level of mechanical properties. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.900 | g/cm³ | ISO 1183/D |
熔体质量流动速率 Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
70 | g/10min | ISO 1133 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
2.0 | kJ/m² | ISO 180-1A |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
105 | ℃ | ISO 75-2/B |
维卡软化温度 Vicat Softening Temp |
151 | ℃ | ISO 306 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D Shaw's D |
ISO 868 | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ISO 527-2 | |
弯曲模量 Bending modulus |
MPa | ISO 178 |
备注 | |||
---|---|---|---|
暂无数据 |
【新闻资讯】查看全部
全球TDI市场价钱将下跌
2018-08-03 随着巴斯夫位于德国路德维希港的TDI工厂重新全面启动,这一市场正从持续的供应紧张状态转向产量过剩,后市全球TDI市场价格将下跌,相关装置的开工率也将随之下降。 巴斯夫年产30万吨的TDI工厂2015年年底投产后,2016年11月由于反应器受损,不得不停产。随后该厂的TDI装置改用小反应器进行间歇式生产,产量大大减少。该厂和沙特阿拉伯萨达尔(Sadara)公司年产20万吨的装置一直很受市场关注,人们原本期待在2014~2016年其他TDI装置关停时这两套装置能够满足市场供应。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |