牌号简介 About |
---|
Kepstan是一种高性能热塑性材料,以聚醚酮酮(PEKK)为基础,具有高度稳定的化学主链。Kepstanis是paek家族中的一个独特成员,具有独特的结构特征,在结晶度控制方面具有特殊的可能性。这些特征包括低的醚/酮比和含有对苯二甲酸和间苯二甲酸部分的共聚物结构。KEPSTAN™ 6010G30是一种玻璃纤维增强化合物,基于6000系列Kepstan树脂。该系列代表了Kepstan系列的伪非晶态产品,提供了最低熔点和最慢的结晶行为,同时使Tg接近160°C。这些特性允许较低的加工温度,并导致玻璃状或半结晶结构,具体取决于加工技术和冷却条件。离子。KEPSTAN™ 6010G30是一种低流量等级,适用于挤压、压缩和注射成型。KEPSTAN™ 6010G30以颗粒形式提供,标准包装为10公斤箱。 KEPSTAN™ is a high performance thermoplastic material, based on PolyEtherKetoneKetone (PEKK) highly stable chemical backbone. KEPSTAN™is a unique member of the PAEK family that incorporates distinctive structural features that allow for exceptional possibilities in the control of crystallinity. These features include a low Ether/Ketone ratio and a copolymer structure incorporating Terephthalic and Isophthalic moieties. KEPSTAN™ 6010G30 is a glass fiber reinforced compound, based on the 6000 series of KEPSTAN™ resins. This series represents the pseudo-amorphous products of the KEPSTAN™ family, offering the lowest melting point and the slowest crystallization behavior, while keeping Tg close to 160°C. These properties allow for lower processing temperatures and lead to glassy or semi-crystalline structures, depending on processing technologies and cooling conditions. KEPSTAN™ 6010G30 is a low flow grade, suitable for extrusion, compression and injection molding. KEPSTAN™ 6010G30 is available in pellet form and standard packaging is 10 kg boxes. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔体体积流动速率 Melt Volume Rate |
|||
380℃,5 kg 380℃,5 kg |
5.00 到 15.0 | cm³/10min | ISO 1133 |
吸水率 Water absorption rate |
|||
23℃,24hr,2.00 mm 23℃,24hr,2.00 mm |
0.10 | % | |
饱和,23℃ Saturation, 23 ℃ |
0.40 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus 2 |
|||
23℃,注塑成型 23 ℃, injection molding 2 |
11000 | MPa | ASTM D638 |
拉伸强度 tensile strength 3 |
|||
屈服,125℃,注塑成型 Yield, 125 ℃, injection molding |
85.0 | MPa | |
断裂,23℃,注塑成型 Fracture, 23 ℃, injection molding |
MPa | ||
拉伸应变 Tensile strain 3 |
|||
断裂,23℃,注塑成型 Fracture, 23 ℃, injection molding |
% | ||
断裂,125℃,注塑成型 Fracture, 125 ℃, injection molding |
% | ||
弯曲模量 Bending modulus |
|||
23℃,注塑成型 23 ℃, injection molding |
MPa | ASTM D790 | |
弯曲强度 bending strength |
|||
23℃,注塑成型 23 ℃, injection molding |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃,注塑成型 23 ℃, injection molding |
J/m | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature 4 |
℃ | ||
熔融温度 Melting temperature 5 |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | ASTM D257 | |
体积电阻率 Volume resistivity |
|||
23℃ 23℃ |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
|||
0.1 mm 0.1 mm |
kV/mm | IEC 60243-1 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.80 mm 0.80 mm |
UL 94 | ||
极限氧指数 Extreme oxygen index 6 |
% | ISO 4589-2 |
备注 |
---|
2、5.0 mm/min |
3、25 mm/min |
4、20°C/min |
5、After cooling below 0.5°C/min |
6、1.6 mm |
【新闻资讯】查看全部
平日罕见的塑料袋居然这么美?!
2017-10-26 塑料袋经常被视为污染环境的废物,人们对于塑料袋的印象普遍也是难降解,使用方便但是美观性很差。但意大利岩石学教授贝尔纳多塞萨尔(BernardoCesare)却发现塑料袋也并非一无是处。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |