牌号简介 About |
---|
用于牙科应用的白色聚醚醚酮VESTAKEEP® DC4420 R是一种白色聚醚醚酮(PEEK)级棒料,特别设计用于可拆卸和固定义齿、牙冠和牙桥。对于VESTAKEEP® DC4420 R,已根据ISO 10993-1永久性粘膜接触建议测试生物相容性。该化合物具有良好的生物相容性和优异的机械、热和化学抗性。 White pigmented polyether ether ketone for dental applications VESTAKEEP® DC4420 R is a white pigmented polyether ether ketone (PEEK) grade rod stock that is especially designed for removable and fixed dentures, crowns and bridges. For VESTAKEEP® DC4420 R, biocompatibility has been tested according to ISO 10993-1 recommendations for permanent mucous membrane contact. The compound composition is optimised for high biocompatibility and superior mechanical, thermal and chemical resistance. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.51 | g/cm³ | ISO 1183 |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
0.40 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
5100 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
屈服 yield |
110 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
屈服 yield |
4.2 | % | |
断裂 fracture |
% | ||
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
维卡软化温度 Vicat Softening Temp |
|||
-- -- |
℃ | ISO 306/A | |
-- -- |
℃ | ISO 306/B | |
熔融温度 Melting temperature 2 |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD:23~55℃ MD:23~55℃ |
1/℃ | ISO 11359-2 |
备注 |
---|
2、2nd heating |
【新闻资讯】查看全部
兰州石化医用聚烯烃平安性达到国度标准
2016-02-17 记者近日获悉,兰州石化公司乙烯厂研发生产的聚烯烃树脂LD26D、PR260通过国家食品药品管理总局专家组评审。专家组一致肯定这两种产品安全性评价方案的科学性,鉴定结果完全满足医用料相关标准要求。这意味着这种医用料正式投入生产后,不仅将成为兰州石化新的利润增长点,还将使我国医药包装摆脱对进口原料的依赖,推动国产医用聚烯烃产业链健康发展。 国内医用聚烯烃树脂每年需求量达10万吨以上,绝大部分依赖进口。乙烯厂以药包材料国产化为出发点,联合兰州化工研究中心和西南化工销售公司共同开展 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |