牌号简介 About |
---|
特点和优点符合ASTM D4894,LLL型,2级树脂成型和冲压粉末,具有很好的自由流动性能,良好的计量性能,良好的模具填充性能,改进的颗粒聚结致密聚合物结构,低渗透性,在负载下大大降低变形,改善的可焊性,良好的电气和机械性能。卡尔特性增加弹性模量 Features and Benefits Meets ASTM D4894 Type lll, Grade 2 resin Molding and ram extrusion powder with very good free-flow properties Good metering properties Good mold filling behavior Improved particle coalescence Denser polymer structure Lower permeability Substantially lower deformation under load Improved weldability Good electrical and mechanical properties Increased modulus of elasticity |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.16 | g/cm³ | ASTM D4894 |
表观密度 Apparent density |
0.83 | g/cm³ | ASTM D4894 |
收缩率 Shrinkage rate |
|||
MD MD |
3.5 | % | ASTM D4894 |
平均颗粒尺寸 Average particle size |
450 | µm | ASTM D4894 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
650 | MPa | ASTM D638 |
拉伸强度 tensile strength |
MPa | ASTM D4894 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D4894 | |
负载变形 Load deformation |
|||
15 MPa 15 MPa 2 |
% | ||
15 MPa 15 MPa 3 |
% | ||
15 MPa 15 MPa 4 |
% | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature |
|||
-- -- 5 |
℃ | ||
-- -- 6 |
℃ | ||
使用温度 Operating temperature |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ASTM D149 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 |
备注 |
---|
2、24 hrs |
3、100 hrs |
4、Permanent |
5、Second |
6、Initial |
【新闻资讯】查看全部
一大波装置将投产!年内PE新增560万吨、PP新增669万吨
2021-03-08 搜料网资讯: 一大波装置将投产!年内PE新增560万吨、PP新增669万吨 2020年我国聚烯烃行业正式进入优胜劣汰的大整合阶段。 2021年市场将重新迎来一波投产高峰,聚烯烃仍是产能持续扩 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |