牌号简介 About |
---|
有机合金系列是一种柔软的聚酰胺合金。优异的性能:聚乙烯螺杆的加工性,低吸湿性,耐化学性(无已知溶剂)。参考等级:刚度低于Le 6000(900兆帕)。适用于管子的挤压(液压、气动、喷漆等) The Orgalloy® LE series is a flexible polyamide alloy. Outstanding properties: processability on PE screw, low moisture absorption, chemical resistance (no known solvents). The grades referenced: lower in rigidity than LE 6000 (900 MPa). Suited to the extrusion of tubes (hydraulic, pneumatic, painting, etc.) |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.03 | g/cm³ | |
熔体体积流动速率 Melt Volume Rate |
|||
235℃,2.16 kg 235℃,2.16 kg |
4.00 | cm³/10min | |
吸水率 Water absorption rate |
|||
饱和,23℃ Saturation, 23 ℃ |
5.5 | % | |
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.5 | % | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
82 | kJ/m² | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
|||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
维卡软化温度 Vicat Softening Temp |
℃ | ||
熔融温度 Melting temperature 2 |
℃ | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Compared to the leakage tracing index |
V | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
可燃性等级 Flammability level |
|||
1.6 mm 1.6 mm |
|||
3.2 mm 3.2 mm |
|||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,15 秒 Shore D, 15 seconds |
|||
拉伸模量 Tensile modulus |
MPa | ||
拉伸强度 tensile strength |
|||
屈服 yield |
MPa | ||
拉伸应变 Tensile strain |
|||
屈服 yield |
% | ||
标称拉伸断裂应变 Nominal tensile fracture strain |
% |
备注 |
---|
2、10°C/min |
【新闻资讯】查看全部
微软迎史上第二大收购,英国反垄断审查添变数
2021-12-15 搜料网资讯: 当地时间12月13日,英国竞争和市场管理局(CMA)宣布将调查微软对人工智能语音技术公司微妙通讯(Nuance Communications)的160亿美元收购交易。CMA认为,微软此次收购可能会 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |