牌号简介 About |
---|
PA610 15%碳纤维增强注塑级。热稳定。黑色。适用于机械性能要求高的零部件。碳纤维的存在也提供了更高的导电性和热导率。这一等级是部分可再生来源(60%的基础聚合物按重量计)。 PA610 15% carbon fiber reinforced injection moulding grade. Heat stabilized. Black colour. Suitable for parts and components requiring high mechanical properties. The presence of carbon fibers also provides higher electrical and thermal conductivity. This grade is partially renewably-sourced (60% of base polymer by weight). |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.15 | g/cm³ | |
吸水率 Water absorption rate |
|||
饱和,23℃,2.00 mm Saturation, 23 ℃, 2.00 mm |
2.7 | % | |
平衡,23℃,50% RH,2.00 mm Equilibrium, 23 ℃, 50% RH, 2.00 mm |
1.2 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
11600 | MPa | |
拉伸强度 tensile strength |
|||
断裂 fracture |
180 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ||
弯曲模量 Bending modulus 2 |
MPa | ||
弯曲强度 bending strength 2 |
MPa | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
熔融温度 Melting temperature 3 |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity 4 |
ohms | ||
体积电阻率 Volume resistivity 4 |
ohms·cm | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.80 mm 0.80 mm |
备注 |
---|
2、2.0 mm/min |
3、10°C/min |
4、500V |
【新闻资讯】查看全部
全球流动性拐点渐近 新兴经济体面临“体检”
2021-11-22 搜料网资讯: 作为全球流动性和风险偏好的重要指标,美元指数近日创出16个月新高,11月19日收盘更是突破96。 专家认为,当海外主要央行渐次开启宽松政策退坡进程,全球流动性拐点 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |