牌号简介 About |
---|
产品说明木粉增强无机填充酚醛模塑料,提高了耐热性,表面很好,刚性高,尺寸稳定性好。煤气表阀门和格栅的应用领域 Product Description Wood flour-reinforced and inorganically filled phenolic moulding compound, increased heat resistance, very good surface, high rigidity, dimensional stability. Application Areas Gas meter valves and grids |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.55 | g/cm³ | ISO 1183 |
表观密度 Apparent density |
0.73 | g/cm³ | ISO 60 |
收缩率 Shrinkage rate 2 |
0.65 | % | ISO 2577 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
35.0 | mg | |
后收缩 Post contraction 2 |
0.45 | % | ISO 2577 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength 3 |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eA | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
|||
23℃ 23℃ |
kJ/m² | ISO 179/1eU | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
8.0 MPa,未退火 8.0 MPa, unannealed |
℃ | ISO 75-2/C | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | IEC 60093 | |
体积电阻率 Volume resistivity |
ohms·cm | IEC 60093 | |
相对电容率 Relative permittivity |
|||
100 Hz 100 Hz |
IEC 60250 | ||
耗散因数 Dissipation factor |
|||
100 Hz 100 Hz |
IEC 60250 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
压缩成型压力 Compression molding pressure |
MPa | ||
压缩成型温度 Compression molding temperature |
℃ |
备注 |
---|
2、Injection |
3、2.0 mm/min |
【新闻资讯】查看全部
美的与伊士曼签约 可使用Tristan品牌
2021-04-05 搜料网资讯: 美的集团与美国伊士曼化学公司签署战略合作协议,伊士曼将授权美的电动小家电产品在国内使用其持有的Tristan品牌,这也是该品牌对中国家电企业的首次授权。 据悉, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |