牌号简介 About |
---|
Xydar G - 930液晶聚合物( LCP)是一种玻纤增强注塑级材料,专门针对电子/电气产品而开发,采用了表面贴装技术。 该树脂具有卓越的成型性能。即使在模温低于200 °F(93 °C)时, Xydar G- 930在长距离流动填充极薄壁件的过程中,也很少或不会产生溢料。此外,模制品翘曲低,焊接线强度出色。 即使在高温下,这种材料也具有高强度和刚度 、低热膨胀系数、高挠曲温度、固有的阻燃性和出色的耐大多数化学品,以及耐候性和抗辐射性能。 Xydar® G-930 Liquid Crystal Polymer (LCP) is a glass reinforced injection molding grade developed specifically for electrical/electronic applications utilizing surface mount technology. The moldability of this resin is exceptional. Xydar® G-930 can fill very thin walls over long flow lengths with little or no flash, even at mold temperatures below 200°F (93°C). In addition, it has low warpage in molded products and exceptional weld line strength. This material exhibits high strength and stiffness (even at elevated temperatures), low coefficient of thermal expansion, high deflection temperature, inherent flame resistance, and outstanding resistance to most chemicals, weathering, and radiation. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.60 | g/cm³ | ASTM D792 |
吸水率 Water absorption rate |
|||
24hr 24hr |
< 0.10 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
15900 | MPa | ASTM D638 |
拉伸强度 tensile strength |
135 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
1.6 | % | ASTM D638 |
弯曲模量 Bending modulus |
MPa | ASTM D790 | |
弯曲强度 bending strength |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
J/m | ASTM D4812 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
球压测试 Ball pressure test |
|||
270℃,3.0 mm 270℃,3.0 mm |
IEC 60695-10-2 | ||
线性热膨胀系数 Linear coefficient of thermal expansion |
ASTM D696 | ||
MD MD |
1/℃ | ASTM D696 | |
TD TD |
1/℃ | ASTM D696 | |
相对温度指数 Relative temperature index |
|||
电气性能,0.75 mm Electrical performance, 0.75 mm |
℃ | UL 746 | |
冲击机械性能,0.75 mm Impact mechanical performance, 0.75 mm |
℃ | UL 746 | |
0.75 mm 0.75 mm |
℃ | UL 746 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
ohms·cm | ASTM D257 | |
介电强度 Dielectric strength |
|||
1.57 mm 1.57 mm |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant |
ASTM D150 | ||
60 Hz 60 Hz |
ASTM D150 | ||
1 MHz 1 MHz |
ASTM D150 | ||
耐电弧性 Arc resistance |
sec | UL 746 | |
相比漏电起痕指数 Compared to the leakage tracing index |
V | ASTM D3638 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.40 mm,黑色 0.40 mm, black |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Tested at UL, August 2015. |
3 抗高压电弧点火 |
4 这些可燃性等级不代表这些材料或任何其他材料在实际着火灾情况下的危险性。UL黄卡允许使用最多50%的回料。 |
【新闻资讯】查看全部
陶氏宣布新加坡客户创新中心正式启动
2018-07-25 2018年7月24日,陶氏化学公司宣布新加坡客户创新中心正式启动,这一战略举措将提升陶氏在东南亚市场的创新能力,更好地为当地客户和合作伙伴提供创新支持。新加坡客户创新中心是继上海、广州、成都创新中心之后陶氏在亚太区的第四家客户创新中心。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |