公司信息及水印
牌号简介 About |
---|
Eastar™ BR001共聚酯具有优异的外观和近乎水透明。其最突出的特点是耐化学性和加工能力。暴露在芳香油中通常会导致许多聚合物树脂开裂或实际断裂,但当暴露在这些油中时,BR001保持其物理性能,其外观几乎不变。BR001是专门为牙刷提供耐化学性、刷毛保持力、强度、硬度、加工性、清晰度、着色性和手感的最佳组合而设计的。根据现行的美国食品药品监督管理局(FDA)法规,Eastar™ BR001共聚酯可合法用于制造符合21 CFR 177.1240(a)规范和使用条件的食品接触物品。BR001样品的迁移试验符合21 CFR 177.1240(3)(1)、(2)和(3)的要求。本产品已通过绿色卫士室内空气质量认证。Greenguard室内空气质量认证标志是通过Greenguard环境研究所(GEI)许可使用的注册认证标志。GEI是一个行业独立的非盈利组织,负责监督Greenguard认证计划。Greenguard认证计划是一个行业独立的第三方测试计划,用于室内环境的低排放产品和材料。欲了解更多关于GEI的信息,并获得Eastman共聚酯的可打印证书,请访问www.greenguard.org。在制造商类别下选择Eastman Chemical Company,然后单击搜索以显示我们的产品列表。 Eastar™ BR001 Copolyester has excellent appearance and is nearly water-clear. Its most outstanding features are its chemical resistance and processing capabilities. Exposure to aromatic oils often causes crazing or actual fracture of many polymer resins, but BR001 maintains its physical properties when exposed to these oils, and its appearance is virtually unchanged. BR001 is specifically formulated to provide the optimal combination of chemical resistance, bristle retention, strength, stiffness, processability, clarity, colorability, and feel for toothbrushes. Under existing United States Food and Drug Administration(FDA) regulations, Eastar™ BR001 copolyester may lawfully be used to make food contact articles which comply with the specifications and conditions of use in 21 CFR 177.1240(a). Migration tests on BR001 samples meet the compliance requirements of 21 CFR 177.1240(3)(1), (2) and (3). This product has been GREENGUARD INDOOR AIR QUALITY CERTIFIED®. The GREENGUARD INDOOR AIR QUALITY CERTIFIED® Mark is a registered certification mark used under license through the GREENGUARD Environmental Institute (GEI). GEI is an industry-independent, non-profit organization that oversees the GREENGUARD Certification Program. The GREENGUARD Certification Program is an industry independent, third-party testing program for low-emitting products and materials for indoor environments. For more information about GEI and to obtain printable certificates for Eastman™ Copolyesters, visit www.greenguard.org. Choose Eastman Chemical Company under the Manufacturer category and click search to display a list of our products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.20 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.20 | % | ASTM D995 |
TD TD |
0.60 | % | ASTM D995 |
光学性能 optical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
透光率 Transmittance |
89 | % | ASTM D1003 |
雾 度 μm Haze μ M |
0.30 | % | ASTM D1003 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ASTM D648 | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness |
R 级 | ASTM D785 | |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
-40℃ -40℃ |
J/m | ASTM D256 | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
|||
23℃ 23℃ |
J/m | ASTM D256 | |
-40℃ -40℃ |
J/m | ASTM D256 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
抚顺石化百万吨乙烯装置完成检修一次开车成功
2017-07-21 经过45天奋战,7月18日凌晨2时30分,抚顺石化乙烯装置碳二加氢反应器生产出合格产品,标志着抚顺石化百万吨乙烯装置顺利完成检修。 今年的大检修是抚顺石化第一次实行“四年一大修”,也是百万吨乙烯项目竣工投产后的首次检修。这次检修不仅完成了烯烃线417大项检修任务,同步完成了656台压力容器、233.7千米压力管道、65台常压金属储罐的检验,以及2200台安全阀、86台呼吸阀的拆检工作,完成74项技改技措项目。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |