牌号简介 About |
---|
Nusil技术的限制性材料可考虑用于短期植入应用,29天或更短时间,或用于外部应用。流体是非固化、稳定的硅聚合物,通常用作润滑剂。液体有多种粘度。根据粘度的不同,可以通过喷涂、浸渍、擦拭或刷洗来涂抹液体。为了获得最佳性能,流体的化学性质不应与被润滑的基底的化学性质相匹配。如果不确定基底和润滑剂的相容性,请联系每种材料的供应商寻求帮助。因为它们是动态的,所以流体可以适应在许多项目中表现良好。评论:甲基氟共聚物(低氟) NuSil Technology's restricted materials may be considered for use in short-term implant applications, 29 days or less, or for external applications. Fluids are non-curing, stable silicone polymers typically used as lubricants. Fluids are available in a variety of viscosities. Depending on the viscosity, fluids can be applied by spraying, dipping, wiping, or brushing. For optimal performance, the chemistry of the fluid should not match the chemistry of the substrate being lubricated. If unsure of the compatibility of the substrate and lubricant, contact the supplier of each material for assistance. Because they are so dynamic, fluids can be adapted to perform well in a wide array of projects. Comments: METHYL FLUORO COPOLYMER (LOW FLUORO) |
技术参数 Technical Data | |||
---|---|---|---|
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.05 | g/cm³ | |
粘度 viscosity |
0.10 到 100 | Pa·s | |
补充 supplement |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
ISO洗脱法细胞毒性试验 ISO elution cytotoxicity test |
|||
IX MEM提取物 IX MEM extract |
|||
条件A+热风炉12小时@200℃ Condition A+hot blast furnace for 12 hours @ 200 ℃ |
非细胞毒性 | ISO 10993-5 USP<87> | |
条件A+高压釜2小时@15 psi Condition A+high-pressure vessel for 2 hours @ 15 psi |
非细胞毒性 | ISO 10993-5 USP<87> | |
体外溶血研究 In vitro hemolysis research |
|||
改良ASTM-萃取法 Improved ASTM extraction method |
非溶血性 | ISO 10993-4 | |
USP和ISO系统毒性研究 USP and ISO system toxicity studies |
|||
提取物 extractive |
ISO 10993-11 USP<88> | ||
遗传毒性:细菌反向突变研究 Genetic toxicity: a study on bacterial reverse mutations |
|||
盐水和DMSO提取物 Salt water and DMSO extract |
ISO 10993-3 | ||
USP热原研究 USP Pyrogen Research |
|||
材料介导 Material mediated |
ISO 10993-11 USP<151> | ||
ISO最大化敏化研究 ISO maximization sensitization research |
|||
提取物 extractive |
ISO 10993-10 | ||
1SO体内研究 In vivo study of 1SO |
|||
提取物 extractive |
ISO 10993-10 USP<88> |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
世伟洛克面向石油和天然气行业扩展了材料方案
2022-05-21 为满足客户在海上和近海环境中已有系统和新系统的不断增长的各种需求,世伟洛克开发出了一种经过精心设计的材料组合方案:使用不同材质的接头和管件进行组合。在某些应用场景 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |