牌号简介 About |
---|
Vydyne® R540H是通用的,热稳定,抗水解,40%玻璃纤维增强PA66树脂。天然的,它是专门设计的,以最大限度地保留物理性质时,暴露在抗冻溶液在高温下。该产品也经过润滑以改善流动性,并提供优越的表面外观。与未增强的PA66相比,玻璃增强的Vydyne树脂具有更高的热变形温度、抗蠕变和更好的尺寸稳定性。这些产品对包括汽油、液压油和大多数溶剂在内的各种化学品具有良好的耐化学性。Vydyne® R540H是热稳定的,以最大限度地减少聚合物在使用中暴露于高温下的氧化降解。本产品在长期高温下可提高物理性能的保持力。此外,Vydyne® R540H还具有优异的编织线强度和抗疲劳性能,这对于使用防冻液进行循环测试至关重要。典型应用/最终用途:Vydyne® R540H成功应用于各种注塑工程应用。典型零件包括汽车夹子、散热器端部水箱、空调和燃油分配系统零件、电气连接器、外壳和线轴以及齿轮、轴承壳、盖和外壳等工业应用。 Vydyne R540H is general-purpose, heat-stabilized, hydrolysis-resistant, 40% glass-fiber reinforced PA66 resin. Available in natural, it is specifically designed to maximize the retention of physical properties when exposed to anti-freeze solutions at elevated temperatures. This product is also lubricated for improved flow and offers superior surface appearance. Glass-reinforced Vydyne resins provide higher heat distortion temperature, resistance to creep and better dimensional stability when compared with unreinforced PA66. These products have good chemical resistance to a broad range of chemicals including gasoline, hydraulic fluids and most solvents. Vydyne R540H is heat-stabilized to minimize oxidative degradation of the polymer when exposed to elevated temperatures in service. This product provides improved retention of physical properties under exposure to long term heat. Also, Vydyne R540H has excellent knit-line strength and fatigue resistance, which is essential for cycle testing with anti-freeze solutions. Typical Applications/End Uses: Vydyne R540H is successfully used in a wide range of injection-molding engineering applications. Typical parts include automotive clips, radiator end tanks, parts of the air-conditioning and fuel distribution systems; electrical connectors, housings and bobbins; and industrial applications such as gears, bearing shells, covers and housings. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.46 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
ISO 294-4 | ||
TD:23℃,2.0 mm TD:23℃,2.0 mm |
0.90 | % | ISO 294-4 |
MD:23℃,2.0 mm MD:23℃,2.0 mm |
0.40 | % | ISO 294-4 |
吸水率 Water absorption rate |
|||
平衡,23℃,50% RH Equilibrium, 23 ℃, 50% RH |
1.5 | % | ISO 62 |
23℃,24hr 23℃,24hr |
0.60 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
|||
23℃ 23℃ |
MPa | ISO 527-2 | |
拉伸强度 tensile strength |
|||
断裂,23℃ Fracture, 23 ℃ |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ISO 527-2 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ISO 178 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ISO 178 | |
泊松比 Poisson's ratio |
ISO 527 | ||
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
ISO 179 | ||
-30℃ -30℃ |
kJ/m² | ISO 179 | |
23℃ 23℃ |
kJ/m² | ISO 179 | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
ISO 179 | ||
-30℃ -30℃ |
kJ/m² | ISO 179 | |
23℃ 23℃ |
kJ/m² | ISO 179 | |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
ISO 180 | ||
-30℃ -30℃ |
kJ/m² | ISO 180 | |
23℃ 23℃ |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
熔融温度 Melting temperature |
℃ | ISO 11357-3 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
TD:23~55℃,2 mm TD:23~55℃,2 mm |
1/℃ | ISO 11359-2 | |
MD:23~55℃,2 mm MD:23~55℃,2 mm |
1/℃ | ISO 11359-2 | |
相对温度指数 Relative temperature index |
|||
电气性能 Electrical performance |
UL 746 | ||
0.75 mm 0.75 mm |
℃ | UL 746 | |
1.5 mm 1.5 mm |
℃ | UL 746 | |
3.0 mm 3.0 mm |
℃ | UL 746 | |
强度机械性能 Strength mechanical performance |
UL 746 | ||
0.75 mm 0.75 mm |
℃ | UL 746 | |
1.5 mm 1.5 mm |
℃ | UL 746 | |
3.0 mm 3.0 mm |
℃ | UL 746 | |
冲击机械性能 Impact mechanical performance |
UL 746 | ||
0.75 mm 0.75 mm |
℃ | UL 746 | |
1.5 mm 1.5 mm |
℃ | UL 746 | |
3.0 mm 3.0 mm |
℃ | UL 746 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
体积电阻率 Volume resistivity |
|||
3.0 mm 3.0 mm |
ohms·cm | IEC 60093 | |
介电强度 Dielectric strength |
|||
1 mm 1 mm |
kV/mm | IEC 60243 | |
耐电弧性 Arc resistance |
|||
3.0 mm 3.0 mm |
ASTM D495 | ||
相比漏电起痕指数 Compared to the leakage tracing index |
|||
3.00 mm 3.00 mm |
V | IEC 60112 | |
高电弧燃烧指数(HAI) High Arc Burning Index (HAI) |
UL 746 | ||
0.75 mm 0.75 mm |
UL 746 | ||
1.5 mm 1.5 mm |
UL 746 | ||
3.0 mm 3.0 mm |
UL 746 | ||
高电压电弧起痕速率 High voltage arc marking rate |
|||
HVTR HVTR |
UL 746 | ||
热丝引燃 Hot wire ignition |
|||
HWI HWI |
UL 746 | ||
0.75 mm 0.75 mm |
UL 746 | ||
1.5 mm 1.5 mm |
UL 746 | ||
3.0 mm 3.0 mm |
UL 746 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
0.75 mm 0.75 mm |
UL 94 | ||
1.50 mm 1.50 mm |
UL 94 | ||
3.00 mm 3.00 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
IEC 60695-2-12 | ||
0.75 mm 0.75 mm |
℃ | IEC 60695-2-12 | |
1.5 mm 1.5 mm |
℃ | IEC 60695-2-12 | |
3.0 mm 3.0 mm |
℃ | IEC 60695-2-12 | |
灼热丝起燃温度 Igniting temperature of the hot wire |
IEC 60695-2-13 | ||
0.75 mm 0.75 mm |
℃ | IEC 60695-2-13 | |
1.5 mm 1.5 mm |
℃ | IEC 60695-2-13 | |
3 mm 3 mm |
℃ | IEC 60695-2-13 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
汽车材料 Automotive materials |
|||
thickness d = 1mm thickness d = 1mm |
FMVSS 302 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
ACC:美国化工业前景向好
2021-12-26 搜料网资讯: 据安迅思休斯敦近日消息,美国化学理事会(ACC)在其年终展望报告中表示,尽管受到冬季风暴尤里和飓风艾达的不利影响,但解封后的支出激增推动了市场对化学品和其他 |
ACC:美国化工业前景向好 搜料网资讯:据安迅思休斯敦近日消息,美国化学理事会(ACC)在其年终展望报告中表示,尽管受到冬季风暴“尤里”和飓风“艾达”的不利影响,但解封后的支出激增推动了市场对化学品和其他商品及材料的需求,2021年美国化学品产量出现增长。 ACC预测,2022年美国化工行业将处于增长的有利地位,因为消费者需求增强,补充库存推动扩张。预计美国GDP在2022年将增长4.4%。2021年,美国GDP增长5.6%,扭转了2020年下滑3.4%的趋势。受商品需求反弹的推动,2021年美国工业生产将增长5.5%,2022年将增长4.0%。ACC首席经济学家、展望报告作者玛莎·摩尔表示:“尽管全球经济风险依然存在,但2022年前美国化工行业仍将处于强势地位。” 汽车和住宅市场是美国化工行业的两大终端市场。2021年美国汽车销量将增至1530万辆,而2019年和2020年的销量分别为1750万辆和1450万辆。预计到2022年,美国汽车销量将达到1600万辆。由于疫情封锁和半导体短缺导致生产放缓,2020年全球汽车产量暴跌。由于抵押贷款利率处于历史低位,以及大流行期间远程工作的兴起,美国住房开工率上升。2021年美国新屋开工数增至158万套,为2006年以来的最高水平。预测显示,在2022年和2023年,美国新屋开工数将放缓至156万套。 尽管供应链和物流仍面临挑战,但美国化学品进出口在2021年强劲反弹。2021年美国化学品出口额将增至1510亿美元,进口增至1270亿美元,贸易顺差达到240亿美元。2022年,美国化学品出口额将增长7.3%,达到1620亿美元;进口将增长7.1%,达到1360亿美元,从而产生260亿美元的贸易顺差。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |
价格走势图
抱歉!该牌号暂无认证数据。
- 汽车空气悬架活塞
- 2019-03-18 87
- Vydyne® R533H 是33%玻璃纤维增强,热稳定的PA66树脂,材料耐磨性和润滑性好
- 阅读全文
汽车空气悬架活塞
2-Vydyne® R533H是一种热稳定级产品,配方可在长时间暴露于高温下时将尼龙聚合物的氧化和热降解降至最低
4-Vydyne® R533H树脂已用于许多发动机罩下的汽车应用、电动工具和园艺用具的电机外壳
- 发起机滑轮
- 2019-03-15 138
- 应用行业:汽车行业 应用市场:汽车部件 终端客户:不明 产品名称:发动机滑轮 选材要求:1-要求材料具有良好的机械强度、耐磨性 2-要求材
- 阅读全文
发起机滑轮
2- Vydyne® R550H产品也经过润滑以改善流动性,并提供优越的表面外观。与未增强的PA66相比,玻璃增强的Vydyne树脂具有更高的热变形温度、抗蠕变和更好的尺寸稳定性
4-Vydyne® R550H非常出色替代金属因为其高抗拉强度,重量轻,耐腐蚀抵抗性惰轮和张紧器用PA66制成的滑轮是更轻,降低转动惯量并增加皮带寿命。
抱歉!暂无数据。