公司信息及水印
牌号简介 About |
---|
Edgetek®工程热塑性聚合物产品组合包括一系列标准和可定制的高性能材料。该组合包括耐高温材料,用于温度升高的工作环境,高模量/结构性材料则用于承重、高强度应用和阻燃产品。 这些聚合物是工程热塑性树脂与不同的增强添加剂混合而成的,如:碳纤维、玻璃纤维及玻璃珠。 PolyOne's Long Fiber Thermoplastic (LFT) compounds are formulated for demanding applications which require high stiffness and good impact such as metal replacement or other structural applications. These products exhibit enhanced physical and mechanical properties versus standard short fiber products. Benefits of LFT compounds include improved impact strength, elastic modulus, and material strength across wide temperature ranges from subambient to highly elevated. Furthermore, LFT compounds have been shown to offer improved performance in the areas of creep and fatigue performance, improved dimensional stability, and exhibit an exceptional surface finish when compared to traditional highly filled short fiber products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.990 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate 2 |
0.30 | % | ISO 294-4 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
12000 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
|||
断裂 fracture |
180 | MPa | ISO 527-2 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
1.7 | % | ISO 527-2 |
弯曲模量 Bending modulus |
MPa | ISO 178 | |
弯曲强度 bending strength |
MPa | ISO 178 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
简支梁缺口冲击强度 Charpy Notched Impact Strength |
kJ/m² | ISO 179 | |
简支梁无缺口冲击强度 Charpy Unnotch Impact strength |
kJ/m² | ISO 179 | |
落锤冲击 Drop hammer impact |
J | ASTM D5420 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Measured on a tensile specimen. Actual mold shrinkage values are highly dependant on part geometry, mold configuration, and processing conditions. |
【新闻资讯】查看全部 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |