牌号简介 About |
---|
Evoprene Super G化合物是基于SEBS的高性能TPE材料。它们是用一种特殊的树脂改性剂配制的,这种改性剂可以增大端块的尺寸。它们也以特殊的方式混合,以确保各种成分的最大分散度。较大的端块提高了玻璃化转变温度(Tg),这比常规的SEBS基化合物具有两大实际优势:提高了耐热性和提高了回收性能。改进的耐热性使常规SEBS基础等级的工作温度提高了10-15摄氏度(18-25华氏度),并通过允许零件在更高温度下不变形的脱模来提高注塑循环时间。通过压缩永久变形测量,改进的回收性能提供了更好的密封特性,如后页所述。这些化合物确实需要较高的加工温度才能达到最佳效果。 Evoprene™ Super G compounds are high performance SEBS-based TPE materials. They are formulated with a special resin modifier which increases the size of the end blocks. They are also compounded in a special way to ensure maximum dispersion of the various ingredients. The larger end blocks increase the glass transition temperature (Tg) providing two major practical advantages over regular SEBS-based compounds: improved heat resistance and improved recovery properties. The improved heat resistance raises the service temperature over regular SEBS-based grades by 10-15 deg C (18-25 deg F) and improves injection moulding cycle times by allowing the parts to be demoulded at a higher temperature without distortion. The improved recovery properties, as measured by compression set, provide much better sealing characteristics as explained overleaf. These compounds do need higher processing temperatures for best results. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.09 | g/cm³ | ISO 2781 |
收缩率 Shrinkage rate |
1.2 to 3.5 | % | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
14.4 | MPa | ISO 37 |
100% 应变 100% strain |
3.20 | MPa | ISO 37 |
拉伸应变 Tensile strain |
|||
断裂 fracture |
460 | % | ISO 37 |
撕裂强度 tear strength 2 |
kN/m | ISO 34-1 | |
压缩形变 Compression deformation |
ISO 815 | ||
22℃,72 hr 22℃,72 hr |
% | ISO 815 | |
70℃,22 hr 70℃,22 hr |
% | ISO 815 | |
100℃,22 hr 100℃,22 hr |
% | ISO 815 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ISO 868 | ||
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
M-S Flow M-S Flow |
MPa | Internal Method |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 B 方法,直角形试样(不割口) |
【新闻资讯】查看全部
9月第一周,华东TDI市场价钱下跌
2018-09-11 进入“金九”,TDI市场并没有如业内预想那样迎来大涨,反而持续阴跌。9月第一周,华东市场价格跌去500元(吨价,下同),运行至29800元左右。 业内人士认为,由于国外低价产品冲击市场,加上需求启动迟缓,TDI市场“金九”或显成色不足。 据山东中海化工集团有限公司市场部经理李宏介绍,8月份国内TDI行情有所改善。特别是8月上旬,国内TDI出厂价普遍涨至32500元。这为进口货入华提供了机遇,对市场造成冲击。 具体来看,后期印度低价货源将于月底 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |