牌号简介 About |
---|
E-9504H-1是一种玻璃纤维填充环氧树脂模塑料,设计用于封装精密的电气元件和大型线圈。优良的热震性、可塑性和在潮湿条件下保持电性能是这种材料的突出特点。 E-9504H-1 is glass fiber filled epoxy molding compound designed for encapsulation of delicate electrical components as well as large coils. Excellent thermal shock, moldability, and retention of electrical properties under humid conditions are the outstanding features of this material. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.70 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD MD |
0.50 到 0.70 | % | ASTM D955 |
吸水率 Water absorption rate |
|||
48hr 48hr |
0.11 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
83.0 | MPa | ASTM D638 |
弯曲模量 Bending modulus |
11700 | MPa | ASTM D790 |
弯曲强度 bending strength |
MPa | ASTM D790 | |
压缩强度 compressive strength |
MPa | ASTM D695 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
J/m | ASTM D256-A | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM E831 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength 2 |
ASTM D149 | ||
-- -- 3 |
kV/mm | ASTM D149 | |
-- -- 4 |
kV/mm | ASTM D149 | |
介电常数 Dielectric constant 5 |
|||
1 MHz 1 MHz 5 |
ASTM D150 | ||
耗散因数 Dissipation factor 5 |
|||
1 MHz 1 MHz 5 |
ASTM D150 | ||
耐电弧性 Arc resistance |
sec | ASTM D495 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Wet, 60 Hz |
3 方法A(短时间) |
4 方法B(逐步) |
5 Wet |
【新闻资讯】查看全部
化工巨头巴斯夫推出每年5亿欧元成本节约计划
2022-10-19 扫描上图二维码,可以免费下载 搜料 APP 近日,巴斯夫发布了2022年第三季度的初步数据:本季度的税后利润从12.5亿欧元下降到9.09亿欧元,下降幅度超过四分之一。能源和原材料成本的 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |