牌号简介 About |
---|
IE-90A是一种坚韧的半柔性聚氨酯弹性体,用于手工批量或真空辅助加工。无需使用汞、MOCA或TDI,室温固化即可获得优良的物理性能。 IE-90A is a tough, semi-flexible polyurethane elastomer formulated for hand-batch or vacuum assisted processing. Excellent physical properties can be obtained with a room temperature cure without the utilization of mercury, MOCA, or TDI. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
|||
Hardener Hardener |
1.04 | g/cm³ | |
固化处理 Curing treatment |
1.12 | g/cm³ | |
基体树脂 Matrix resin |
1.20 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD |
0.10 到 0.50 | % | ASTM D2566 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热固组件 Thermosetting components |
|||
树脂 resin |
按重量计算的混合比: 38 按容量计算的混合比: 33 | ||
硬化法 Hardening method |
|||
脱模时间 stripping time |
min | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
粘度 viscosity |
|||
25℃ 25℃ 2 |
Pa·s | ||
25℃ 25℃ 3 |
Pa·s | ||
25℃ 25℃ 4 |
Pa·s | ||
固化时间 Curing time |
|||
25℃ 25℃ |
hr | ||
胶凝时间 Gelation time |
min | ||
Cured Properties Cured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
ASTM D2240 | ||
拉伸强度 tensile strength |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | ASTM D638 | |
撕裂强度 tear strength |
kN/m | ASTM D624 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Resin |
3 Mixed |
4 Hardener |
【新闻资讯】查看全部
政策引力:2016年塑机界国际性政策法规大清点
2016-12-16 2016年已经接近尾声,纵观这一年来,塑料(机械)行业得以稳固发展,不管是从环保的角度还是从行业发展的角度,各国相继出台的系列相关政策都发挥着不可小觑的推动作用,那么,在2016这一年里,国际方面都推出了哪些相关性政策呢? |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |