牌号简介 About |
---|
为动力装置组件开发,该组件需要通过成型化合物进行良好的散热。优点:导热系数高,可塑性好,防潮性好,应力低。用于汽车成型系统中,固化速度快。KE-870和KE-880采用特殊的高导热填料系统配制而成,具有高导热性(3W/m K以上)。应用隔离包,如TO-220和TO-3P,需要散热特性。用于高加热量的包装,如电源模块。 Developed for Power Device Package that needs Good Heat Dissipation Through Molding Compound. Strong Points High Thermal Conductivity with Good Moldability, Excellent Moisture Resistance and Low Stress. Used in Auto Molding System by Rapid Cure Grades. KE-870 and KE-880 is Formulated with Special High Thermal Conductivity Filler System and Achieve High Thermal Conductivity (above 3W/m K). Application Isolation Packages such as TO-220 and TO-3P that need Heat Dissipation Characteristics. Packages for High Heating Volume such as Power Module. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
2.19 | g/cm³ | |
螺旋流动长度 Spiral flow length |
50.0 | cm | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
玻璃化转变温度 Glass transition temperature |
190 | ℃ | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
|||
-- -- 3 |
2.1E-5 | cm/cm/℃ | |
-- -- 4 |
5.9E-5 | cm/cm/℃ | |
导热系数 Thermal conductivity coefficient |
W/m/K | ||
Uncured Properties Uncured Properties |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
胶凝时间 Gelation time |
min |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Alpha 1 |
3 Alpha 2 |
【新闻资讯】查看全部
2021年4月份规模以上工业增加值增长9.8%
2021-05-17 搜料网资讯: 4月份,规模以上工业增加值同比实际增长9.8%(以下增加值增速均为扣除价格因素的实际增长率),比2019年同期增长14.1%,两年平均增长6.8%。从环比看,4月份,规模以上工 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |