牌号简介 About |
---|
P系列树脂是继纯聚合物U-100的特性之后,在流动性和光学性能方面得到改善的树脂。在许多超级工程塑料中,树脂是少数具有耐热性的透明聚合物合金。在150~175℃范围内,热稳定型P系列树脂的耐热性有不同的变化,超级工程塑料中透明型耐热树脂较少,因此P系列树脂具有一定的应用价值。这些树脂具有良好的耐候性,尤其是P-1001树脂通过了SAE标准(J576和J578)和FMVSS标准(108)的认证。充分利用这些特性,树脂可以用作汽车灯的透镜。高流动型树脂P-1001A和P-3001S也可用于薄成型产品。 P series resins are resins succeeding the characteristics of the neat polymer, U-100, and improved in flowability and optical properties. Among many super engineering plastics, the resins are few transparent polymer alloys that have heat resistance. The heat-stable P-series resins have variations different in heat resistance in the range from 150 to 175°C. There are few transparent heat-resistant resins among super engineering plastics, and thus P series resins are valuable. The resins have favorable weather resistance, and in particular, the P- 1001 resin is approved by SAE Standard (J576 and J578) and FMVSS Standard (108). Making the most of these characteristics, the resins may be used, for example, as the lenses for automobile lamps. High flow-type resins, P-1001A, and P-3001S, are also available for thin molding products. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.36 | g/cm³ | ASTM D792 |
收缩率 Shrinkage rate |
|||
MD:3.0 mm MD:3.0 mm |
0.30-0.40 | % | ASTM D995 |
TD:3.0 mm TD:3.0 mm |
0.40-0.50 | % | ASTM D995 |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.12 | % | ASTM D570 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
23℃ 23℃ |
67.0 | MPa | ASTM D638 |
拉伸应变 Tensile strain |
|||
断裂,23℃ Fracture, 23 ℃ |
% | ASTM D638 | |
弯曲强度 bending strength |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
弯曲模量 Bending modulus |
|||
23℃ 23℃ |
MPa | ASTM D790 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ASTM D648 | |
线性热膨胀系数 Linear coefficient of thermal expansion |
|||
MD MD |
1/℃ | ASTM D696 | |
TD TD |
1/℃ | ASTM D696 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
|||
0.75mm 0.75mm |
UL 94 | ||
3.00mm 3.00mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
浙江试点工程师职称制度革新 首个试点选在塑料机械行业
2017-02-24 评高工职称,不再只看论文和科研,为企业设计的产品、制定的标准反而更重要。这是最近举行的全省塑料机械高级工程师职称评审会议上实施的人才评价“新政”。 据省人力社保厅和省经信委介绍,原来评职称,专业都比较大, |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |