牌号简介 About |
---|
了解石油和天然气勘探和开采行业的严峻挑战,PPE提供了最先进的弹性体材料系列,以满足在最恶劣条件下运行的密封应用的需要。Perlast® G92E是Endura系列精英材料的一部分,专门为井下、地面和海底油田设备的防爆减压(ED)而设计。Perlast® G92E具有优异的化学相容性,同时具有优异的耐热性和抗电蚀性。关键属性具有优异的抗爆炸减压性能。按照NACE TM0297标准测试。在150°C(302°F)的氮气中测试高达28兆帕(4000psi)120小时,减压20分钟:结果良好,无裂纹或起泡。除了传统的TFE/P(AFLA)和FKM聚合物外,对甲醇、酸气、热水、蒸汽和油具有优异的抵抗力。优良的压缩永久变形提供长期的密封能力和改进的防漏,从而最大限度地减少设备故障。典型应用高压环境严酷的化学暴露勘探和钻井设备完工设备海底阀门和泵压缩机O型环、T型密封、特殊剖面和定制密封 Understanding the demanding challenges in the oil and gas exploration and extraction industry, PPE offers the most technically advanced range of elastomer materials to meet the needs of sealing applications operating in the most severe conditions. Perlast® G92E is part of the EnDura® range of elite materials which have been specifically formulated for Explosive Decompression (ED) resistance in downhole, surface and subsea oilfield equipment. Perlast® G92E offers exceptional chemical compatibility, combined with excellent thermal and ED resistance. Key Attributes Excellent Explosive Decompression resistance. Tested to NACE TM0297 standard. Tested up to 28 MPa (4000psi) in nitrogen at 150°C (302°F) for 120 hours, and decompressed over 20 minutes: excellent results with no cracks or blistering. Exceptional resistance to methanol, sour gas, hot water, steam and oils, beyond that of conventional TFE/P (Aflas®) and FKM polymers. Excellent compression set provides long-term sealing capability and improved leak prevention thus minimizing equipment failure. Typical Applications High pressure environments Harsh chemical exposure Exploration and drilling equipment Completion equipment Subsea valves and pumps Compressors O-rings, T-section seals, special profiles and custom-made seals |
技术参数 Technical Data | |||
---|---|---|---|
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
IRHD 硬度 IRHD hardness |
90 | ASTM D1415 , ISO 48 | |
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
26.0 | MPa | ASTM D412 , ISO 37 |
100% 应变 100% strain |
25.0 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
110 | % | ASTM D412,ISO 37 |
压缩形变 Compression deformation |
ASTM D395 , ISO 815 | ||
200℃,24 hr 200℃,24 hr |
24 | % | ASTM D395,ISO 815 |
200℃,350 hr 200℃,350 hr |
% | ASTM D395,ISO 815 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
最高工作温度 Maximum operating temperature |
℃ |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
2021 CHINAPLAS国际橡塑展完美收官
2021-04-19 搜料网资讯: 2021年4月13日-4月16日 为期4天的 2021国际橡塑展 在深圳国际会展中心 圆满结束! 在本次展会中 展出了 613 SEc薄壁高速注塑机 300D全电动注塑机 1200JSe两板式发泡专用机 受到 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |