牌号简介 About |
---|
优良的可燃性和性能。提高零件的可靠性。京瓷化工的酚醛模塑料“Tecolite”符合提高设备可靠性的要求,如通过UL规定的可燃性。Tecolite“在长时间使用恶劣环境下具有良好的尺寸稳定性。因此,它是可靠性部件的卓越产品。它是插头、换向器、耐热电器零件等的最佳选择。 Excellent flammability and Excellent properties. Raising the reliability of parts. Kyocera Chemical's Phenolic Molding Compounds "TECOLITE" are corresponding to the demand for raising the reliability of apparatus, such as flammability by UL regulation. "TECOLITE" have a good dimension stability under a use severe situation for a long period of time. Therefore, it is preeminent product for reliability parts. It is the best for a plug, commutators, heat-resistant electricity parts, etc. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.50 | g/cm³ | |
收缩率 Shrinkage rate |
|||
MD MD 3 |
0.50 到 0.70 | % | |
MD MD 4 |
1.1 到 1.3 | % | |
TD TD 4 |
0.80 到 1.0 | % | |
吸水率 Water absorption rate |
|||
平衡 balance |
< 0.40 | % | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
弯曲强度 bending strength |
MPa | ||
压缩强度 compressive strength |
MPa | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
℃ | ||
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
介电强度 Dielectric strength |
kV/mm | ||
耐电弧性 Arc resistance |
sec | ||
相比漏电起痕指数 Compared to the leakage tracing index |
V | ||
绝缘电阻 insulation resistance |
|||
沸腾后 After boiling |
ohms | ||
As Molded As Molded |
ohms | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
0.71 mm 0.71 mm |
UL 94 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Injection Molding |
3 Compression Molding |
【新闻资讯】查看全部
受疫情影响,普立万4月份订单量下降15%
2020-04-23 普立万首席执行官Robert Patterson周二表示,由于全球新型冠状病毒疫情造成停产和其他后果,汽车需求下降,消费者可自由支配支出减少,普立万4月份的订单同比下降约15%。 Patterson在俄 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |