牌号简介 About |
---|
NANCAR® 1203LD是由70份Nancar NBR和30份聚氯乙烯组成的熔剂混合物。这种聚合物在正常老化条件下有足够的稳定剂。其良好的挤出加工性能使其产品表面光滑。NANCAR® 1203LD具有优异的耐磨性、耐臭氧性、耐油性和耐燃料性。建议用于电缆护套、皮带、软管套、鞋底、鞋和辊。 NANCAR® 1203LD is a fluxed blend of 70 parts NANCAR NBR and 30 parts polyvinyl chloride. This polymer has sufficient stabilizer for normal aging conditions. Its good processability for extrusion provides smooth surface on the resultant products. NANCAR® 1203LD has excellent resistance to abrasion, ozone, oils and fuels. It is suggested for use in cable jackets, belts, hose covers, shoe soles, shoes and rolls. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
门尼粘度 Mooney viscosity |
|||
ML 1+4,100℃ ML 1+4,100℃ |
66 | MU | ASTM D1646 |
丙烯腈含量(Bound) Acrylonitrile content (Bound) |
28.0 | % | 内部方法 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 A Shaw's A |
72 | ||
弹性体 elastic body |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸强度 tensile strength |
|||
屈服 yield |
12.7 | MPa | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
370 | % | |
压缩形变 Compression deformation |
|||
100℃,70 hr 100℃,70 hr |
% | ||
老化性能 Aging performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
空气中拉伸强度的变化率 The rate of change in tensile strength in air |
|||
100℃,70 hr 100℃,70 hr |
% | ||
空气中极限伸长率的变化率 The rate of change in ultimate elongation in air |
|||
100℃,70 hr 100℃,70 hr |
% | ||
空气中硬度计硬度的变化率 The rate of change in hardness of a hardness tester in the air |
|||
100℃,70 hr 100℃,70 hr |
|||
拉伸强度的变化率 The rate of change in tensile strength |
|||
100℃,70 hr,在ASTM #1油中 100 ℃, 70 hr, in ASTM # 1 oil |
% | ||
100℃,70 hr,在IRM 903油中 100 ℃, 70 hr, in IRM 903 oil |
% | ||
极限伸长率的变化率 Change rate of ultimate elongation |
|||
100℃,70 hr,在ASTM #1油中 100 ℃, 70 hr, in ASTM # 1 oil |
% | ||
100℃,70 hr,在IRM 903油中 100 ℃, 70 hr, in IRM 903 oil |
% | ||
邵氏硬度的变化率 The rate of change in Shore hardness |
|||
支撐 A,100℃,70 hr,在ASTM #1油中 Support A, 100 ℃, 70 hr, in ASTM # 1 oil |
|||
支撐 A,100℃,70 hr,在IRM 903油中 Support A, 100 ℃, 70 hr, in IRM 903 oil |
|||
体积变化 Volume change |
|||
100℃,70 hr,ASTM 标准油(1号) 100 ℃, 70 hr, ASTM standard oil (No.1) |
% | ||
100℃,70 hr,在IRM 903油中 100 ℃, 70 hr, in IRM 903 oil |
% | ||
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热损耗 Heat loss |
% | ASTM D5688 | |
补充信息 Supplementary information |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
耐臭氧性 Ozone resistance 2 |
|||
50 pphm X 40℃ X 20% 50 pphm X 40℃ X 20% 2 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 at 24 hrs, 48 hrs, 72 hrs, 96 hrs, 168 hrs |
【新闻资讯】查看全部
选购模具配件时留意六大要求
2016-08-02 为了更好的使用模具,我们在选购模具配件时,需要根据具体的要求进行选择,其模具配件常见要求主要有以下几点: 1:简单的安装和零件如何保养:查看是否配送简单明了的安装说明。在适用的情况下,一起包装的产品也应标 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |