牌号简介 About |
---|
PPS-HMR60是以PPS树脂为基体,填充矿物和玻璃纤维的增强型PPS复合材料。具有较高的刚性、抗蠕变、低模具收缩、耐高温、固有的阻燃性、优良的电气绝缘性能、易加工、尺寸稳定性好等特点。由于其高性能和相对低廉的价格,广泛应用于电子、电器、汽车、家电、铁路、航天航空、机械和军事等领域,如:连接器、插头、灯座、要求耐高温的电器外壳、螺母、螺栓和接触件等。电器面板。 PPS-hMR60 is filled and reinforced PPS compound, which is filled with mineral and glass fiber based on the PPS resin. With a comparative low price, it shows high rigidity, creep resistance, low mold shrinkage, high-temperature resistance, inherent flame resistance, excellent electrical insulation properties, easy processing, and good dimensional stability. Owing to its high performance and comparative low price, it is widely used in electronic, electric appliances, automobile, home appliances, railway, space aviation, mechanical and military fields etc. Such as: connectors, plugs, lamp holders, electric appliance outer shells where high-temperature resistant is required, nuts, bolts and contacting panel of electric appliance. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.92 | g/cm³ | 内部方法 |
收缩率 Shrinkage rate |
内部方法 | ||
MD MD |
0.25 | % | 内部方法 |
TD TD |
0.75 | % | 内部方法 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
10 | kJ/m² | 内部方法 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
1.8 MPa,未退火 1.8 MPa, unannealed |
265 | ℃ | 内部方法 |
熔融温度 Melting temperature |
℃ | 内部方法 | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
表面电阻率 Surface resistivity |
ohms | 内部方法 | |
体积电阻率 Volume resistivity |
ohms·cm | 内部方法 | |
介电强度 Dielectric strength |
kV/mm | 内部方法 | |
介电常数 Dielectric constant |
|||
1 MHz 1 MHz |
内部方法 | ||
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
内部方法 | ||
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell hardness 2 |
内部方法 | ||
拉伸强度 tensile strength |
MPa | 内部方法 | |
拉伸应变 Tensile strain |
|||
断裂 fracture |
% | 内部方法 | |
弯曲模量 Bending modulus |
MPa | 内部方法 | |
弯曲强度 bending strength |
MPa | 内部方法 | |
压缩强度 compressive strength |
MPa | 内部方法 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 HR |
【新闻资讯】查看全部
PVF/PVDF膜国标制定启动
2016-01-21 我国PVF/PVDF薄膜国家标准制定的日程正式启动。近日冠日、蓝天环保、阿科玛、杜邦、阿特斯、天合、辉伦等10多家国标起草单位及20多位学者专家齐聚常熟,参加全国绝缘材料标委会主办的晶体硅太阳电池组件用聚氟乙烯绝缘薄膜(PVF/PVDF)国家标准制定工作启动会。 会议讨论了由冠日起草的PVF/PVDF薄膜国标讨论稿,初步确定了国标的制定原则、试验验证方案,并成立了起草工作组。预计薄膜样品收集及测试工作将在春节后展开。 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |