牌号简介 About |
---|
Polimid B 30 GF V0HFR KW是一种聚酰胺6(尼龙6)材料,含有的填充物为30% 玻璃纤维增强材料。 该产品在非洲和中东、拉丁美洲、欧洲或亚太地区有供货,。 Polimid B 30 GF V0HFR KW的主要特性有: 阻燃/额定火焰 Flame Retardant 耐热 无卤素 Polimid B 30 GF V0HFR KW is a Polyamide 6 (Nylon 6) material filled with 30% glass fiber. It is available in Africa & Middle East, Asia Pacific, Europe, or Latin America. Important attributes of Polimid B 30 GF V0HFR KW are: Flame Rated Flame Retardant Halogen Free Heat Resistant |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
1.44 | g/cm³ | ISO 1183 |
收缩率 Shrinkage rate |
0.40 到 0.60 | % | |
吸水率 Water absorption rate |
|||
23℃,24hr 23℃,24hr |
0.80 | % | ISO 62 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
拉伸模量 Tensile modulus |
8800 | MPa | ISO 527-2 |
拉伸强度 tensile strength |
ISO 527-2 | ||
屈服 yield |
130 | MPa | ISO 527-2 |
断裂 fracture |
MPa | ISO 527-2 | |
拉伸应变 Tensile strain |
ISO 527-2 | ||
屈服 yield |
% | ISO 527-2 | |
断裂 fracture |
% | ISO 527-2 | |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
kJ/m² | ISO 180/A | |
悬臂梁无缺口冲击强度 Notched impact strength of cantilever beam |
kJ/m² | ISO 180 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火 0.45 MPa, unannealed |
℃ | ISO 75-2/B | |
1.8 MPa,未退火 1.8 MPa, unannealed |
℃ | ISO 75-2/A | |
连续使用温度 Continuous use temperature 2 |
℃ | ||
维卡软化温度 Vicat Softening Temp |
℃ | ISO 306/A120 | |
球压测试 Ball pressure test |
|||
165℃ 165℃ |
IEC 60695-10-2 | ||
熔融温度 Melting temperature |
℃ | DSC | |
电气性能 Electrical performance |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
相比漏电起痕指数 Compared to the leakage tracing index |
V | IEC 60112 | |
阻燃性能 FLAME CHARACTERISTICS |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
阻燃等级 Flame retardant level |
UL 94 | ||
0.80 mm 0.80 mm |
UL 94 | ||
1.60 mm 1.60 mm |
UL 94 | ||
3.20 mm 3.20 mm |
UL 94 | ||
灼热丝可燃性指数 Glowing wire flammability index |
|||
2.0 mm 2.0 mm |
℃ | IEC 60695-2-12 | |
灼热丝起燃温度 Igniting temperature of the hot wire |
|||
2 mm 2 mm |
℃ | IEC 60695-2-13 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
2 Without Load |
【新闻资讯】查看全部
聚氨酯胶粘剂助力汽车轻量化展开
2016-09-26 聚氨酯胶粘剂广泛应用于制鞋、包装、建筑、汽车等领域,而且由于其优良的性能,被认为是国内最有发展潜力的胶种之一,也成为聚氨酯新材料工业一个重要的行业,其中汽车工业已经成为聚氨酯胶粘剂发展最快的领域,16年PU胶粘剂的需求平均增速依旧保持在10%左右,在汽车工业的增速则将高于这一数字,预计约为13%-15%。 由于环保和节能的需要,汽车的轻量化已经成为世界汽车发展的潮流,其中一个途径是更多的采用轻质材料,如高性能塑料和复合材料零部件,这也加速了PU胶粘剂的发展。由于含有大量极性 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |