牌号简介 About |
---|
gp100bkxp是一种高密度聚乙烯化合物,专门用于制造用于配水的挤压管。采用双峰技术生产,摩尔质量高。它具有较高的机械性能,并具有优异的抗静水压力和应力开裂性能。根据ISO 9080,该树脂的MRS(最低要求强度)为10兆帕,根据ISO 12162,该树脂被归类为PE 100。GP100BKXP含有炭黑,可防止紫外线辐射和光降解。符合NBR 15561:07和ISO 4427:07的要求。用途:用于配水、水下特使和加压下水道系统的黑色PE 100压力管;水下电缆的护套;采矿用管道。工艺:管材挤出。 GP100BKXP is a High Density Polyethylene compound specially developed for the manufacturing of extruded pipes for water distribution. It is produced with bimodal technology and has high molar mass. It shows high mechanical properties and has excellent resistance to hydrostatic pressure and stress cracking. This resin has MRS (Minimum Required Strength) of 10 MPa, according to ISO 9080, and is classified as PE 100, according to ISO 12162. GP100BKXP contains carbon black that protects it against ultraviolet radiation action and photodegradation. Meets the requirements of NBR 15561:07 and ISO 4427:07. Application: Black PE 100 pressure pipes for water distribution, underwater emissaries and pressurized sewer systems; jacketing of underwater cables; pipes for mining. Process: Pipe Extrusion. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density |
0.958 | g/cm³ | ASTM D792 |
熔体质量流动速率 Melt Flow Rate |
|||
190℃,5.0kg 190℃,5.0kg |
0.25 | g/10min | ASTM D1238 |
抗环境应力开裂 ESCR(Environmental Stress Cracking Resistance) |
|||
50 ℃,2.00 mm,10%非离子表面活性剂,模压成型,F50 50 ℃, 2.00 mm, 10% non-ionic surfactant, molded, F50 |
> 1000 | hr | ASTM D1693 |
炭黑含量 Carbon black content |
2.0 到 2.5 | % | ASTM D1603 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Impact strength of cantilever beam notch |
|||
模压成型 Compression Molding |
无断裂 | ASTM D256 | |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 Hot deformation temperature |
|||
0.45 MPa,未退火,模压成型 0.45 MPa, unannealed, molded |
℃ | ASTM D648 | |
维卡软化温度 Vicat Softening Temp |
℃ | ASTM D1525 2 | |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
邵氏硬度 Shore hardness |
|||
邵氏 D,模压成型 Shaw's D, molded |
ASTM D2240 | ||
拉伸强度 tensile strength |
ASTM D638 | ||
屈服,模压成型 Yield, molding |
MPa | ASTM D638 | |
断裂,模压成型 Fracture, molded |
MPa | ASTM D638 | |
拉伸应变 Tensile strain |
ASTM D638 | ||
屈服,模压成型 Yield, molding |
% | ASTM D638 | |
断裂,模压成型 Fracture, molded |
% | ASTM D638 | |
弯曲模量 Bending modulus |
|||
1% 正割,模压成型 1% cut, molded |
MPa | ASTM D790 |
备注 |
---|
2 压 力1 (10N) |
【新闻资讯】查看全部
中东石化产品需求低迷
2021-08-01 搜料网资讯: 据安迅思近日消息,中东的石化市场面临供应过剩和需求低迷的趋势,这种趋势可能会持续整个夏季。 另外,经历数月原料供应紧张后,随着产量缓慢恢复正常,供应量有 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |