牌号简介 About |
---|
Moplen HP480s Moplen HP480S是PMC根据Basell的许可使用Spheripol工艺生产的聚丙烯均聚物。Moplen HP480S是客户选择的一种均聚物,用于DVD盒、家庭用品容器、瓶盖和玩具的注塑成型。Moplen HP480S树脂符合21 CFR 177.1520联邦法规中食品接触的FDA要求。Moplen HP480s Moplen HP480S是一种使用Spheripol工艺制造的聚丙烯高聚物。典型应用包括CD和DVD外壳、家庭用品、容器和其他薄壁注塑制品。 Moplen HP480S Moplen HP480S is the polypropylene homopolymer manufactured by PMC under the license of BASELL using the Spheripol process. Moplen HP480S is a homopolymer selected by customers for use in injection molding of DVD case, housewares containers, closures and toys. Moplen HP480S resin meets the FDA requirements in the Code of Federal Regulations in 21 CFR 177.1520 for food contact. Moplen HP480S Moplen HP480S is a polypropylene homopolymer with good flowability, good dimensional stability, good impact and stiffness balance and good surface finish. Typical applications include CD and DVD Casings, houseware, containers, toys, and thin wall injection moulded articles. |
技术参数 Technical Data | |||
---|---|---|---|
物理性能 PHYSICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
密度 Density Density |
0.9 | g/cm³ | ASTM D1505 |
熔体质量流动速率 Melt Flow Rate Melt Flow Rate |
|||
230℃,2.16kg 230℃,2.16kg |
40 | g/10min | ASTM D1238 |
冲击性能 IMPACT |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
悬臂梁缺口冲击强度 Izod Notched Impact strength Izod Notched Impact strength |
|||
23℃,注塑成型 Injection Molding 23 ℃, injection molding |
19.6 | J/m | ASTM D256 |
热性能 THERMAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
热变形温度 HDT Hot deformation temperature HDT |
|||
0.45 MPa,未退火 unannealed,注塑成型 Injection Molding 0.45 MPa, unannealed, injection molding |
110 | ℃ | ASTM D648 |
维卡软化点 Vicat Softening Point |
152 | ℃ | ASTM D1525 |
机械性能 MECHANICAL |
额定值 Nominal Value |
单位 Units |
测试方法 Test Method |
洛氏硬度 Rockwell Hardness Rockwell hardness |
|||
R 级 R-level |
ASTM D785 | ||
拉伸强度 Tensile Strength Tensile Strength |
|||
屈服 yld,注塑成型 Injection Molding Injection Molding |
MPa | ASTM D638 | |
拉伸应变 Tensile Strain Tensile Strain |
|||
屈服 yld,注塑成型 Injection Molding Injection Molding |
% | ASTM D638 | |
弯曲模量 Flexural Modulus |
|||
注塑成型 Injection Molding |
MPa | ASTM D790 |
备注 |
---|
1 一般属性:这些不能被视为规格。 |
【新闻资讯】查看全部
美资助研发气候相关解决方案
2022-01-29 1月17日,美国能源部宣布,该机构将为其旗下的能源前沿研究中心(EFRC)提供4.2亿美元的清洁能源突破基金,对相关研究进行资助。这笔资金将资助清洁能源技术、先进低碳制造和量子信 |
【免责声明】 广州搜料信息技术有限公司保留所有权利。 此数据表中的信息由搜料网soliao.com从该材料的生产商处获得。搜料网soliao.com尽最大努力确保此数据的准确性。 但是搜料公司对这些数据值及建议等给用户带来的不确定因素和后果不承担任何责任,并强烈建议在最终选择材料前,就数据值与材料供应商进行验证。 |